Shaw 3/8 in. x 2 in. x 78 in. T-Mold-DTMDH00879 - The Home Depot


Model # DTMDH00879

Internet # 202808994

3/8 in. x 2 in. x 78 in. T-Mold

Shaw 3/8 in. x 2 in. x 78 in. T-Mold

This item has been discontinued.
The Home Depot no longer carries this specific product.

$29.98 / each


Model # DTMDH00879

Internet # 202808994

T-Molding is commonly used in doorways to join two wood floors in adjoining rooms. It's also recommended when making transitions from a wood floor to another floor that is approximately the same height. T-Molding is also used to provide expansion joints when a floor dimension exceeds a length of 40 ft. or a width of 30 ft.

California residents: seeProposition 65 information

  • 2 in. Wide x 78 in. Length T-Mold Hardwood Molding
  • Pre-finished Molding, Medium Color, Light Gloss, Rustic Finish
  • Appropriate Grade for Installation is Above, On or Below Ground Level
  • Installation Method: Nail or staple
  • Residential and commerical use
  • All online orders for this item ship via parcel ground and may arrive in multiple boxes
  • Made in the USA


Assembled Depth (in.)  78 in  Assembled Height (in.)  0.625 in 
Assembled Width (in.)  2 in  Product Length (in.)  78 
Product Thickness (in.)  .625 in  Product Width (in.) 
Thickness  0.625 in  Width (in) x Length (in)  2 x 78 
Color  Brown  Color Family  Wood Grain 
Commercial / Residential  Commercial / Residential  Core Material  Hickory 
Flooring Product Type  Engineered Wood Moulding/Trim  Indoor/Outdoor  Indoor 
Parquet  No  Prefinished  Yes 
Product Weight (lb.)  1.75 lb  Returnable  90-Day 
Stainable/Paintable  Stainable & Paintable  Wood Species or Material  Hickory 
Warranty / Certifications
Manufacturer Warranty  N/A 


Rated 5 out of 5 by 1 reviewer.
Rated 5 out of 5 by Hickory T-Molding I purchased this T-molding to bridge the gap brtween the laminate flooring in our kitchen and living room. The molding is a good match to both floors. Material is very hard. Had to predrill holes before I was able to nail it down. I used ring shanked nails to secure it. Had to counter sink the holes so that the nail heads were recessed. Will fill the holes with matching putty. Looks great! Better than the flimsy 4 in 1 molding that I used before. January 29, 2012
1-1 of 1


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.