Rated 4.2 out of 5 by 6
Rated 4.0 out of 5.0 by MDB Sturdy panel.
They said the ground bar is factory installed, which is true, but they don't provide a larger lug to accept a larger feeder wire grounding conductor
October 11, 2016
Rated 1.0 out of 5.0 by Oscar Arrived like it had been kicked from the warehouse to my door
The panel itself is fantastic. I have installed many. Siemens is the best layout by far. I couldn't get one locally for some reason so I tried online. Home Depots' fulfillment of the order. .......not so much. The panel was obviously a previous return due to the extreme amount of packing tape . It looked like it had been kicked to my house by ups from there warehouse. I cautiously decided to see if anything could have survived the journey. Cut through the tape annnnddd.....main breaker smashed to pieces. Back to the depot and returned for which I received a inquisition over how it got like that. I don't prefer to shop the depot but they are a nessecary evil. I spent upwards of 40k there this year. Not too happy
July 5, 2016
Rated 5.0 out of 5.0 by Novellus Maximum Capacity 200A Load Center - High Quality Construction.
I recently purchased a forclosure home, which had been built in the late 70's. As such, it was equipped with an old school Murray 200A split load center which had been loaded to the MAX, and had no room for any of my planned electrical updates and additions.
Considering the type of breakers that were in the old Murray breaker box (mostly Type Q circuit breakers), I shopped around and identified the Seimens P4040B1200CU 200 Amp 40-Space 40-Circuit Indoor Main Breaker Load Center as the unit of choice for my home's electrical upgrade that I wanted to do.
The first thing I did was to go to my local permiting office (City Hall), and obtained an electrical permit so that I could change out the Electrical Panel.
Then I visited my local Home Depot store, and purchased one of these ( P4040B1200CU ). It turned out to be a unit of high qualtiy materials.and construction.
I planned to do the work on a Friday, so a couple of days earlier, I scheduled an electrical inspection of the completed work for late Friday afternoon. I also called my utility company to inform them of my plans to perform this type of work on that day.
With everything in place, on Friday morning contacted my local utility, and informed them that I was going to pull the Meter for a period of 8 hours.
With the meter out, I proceeded to remove the old Murray electrical panel, and replaced it with this new one,
I carefully and cleanly routed all wires into the new box, and connected them to the old circuit breakers that I moved from the old box to this new one.
I double checked all my work, and once satisfied that all was correct, I re-connected the electrical meter.
I then electrically tested each of the circuits. At the same time, I labled each and everyone of the circuit breakers.
An hour later, the inspector showed up as scheduled. He checked everything out, and approved the whole thing... I asked a bunch of questions, and he seemed quite pleased that I had undertaken to update the load center...
He then left a label on the meter. With that label in place, I then called the Utility, who later (the next week) came by and re-sealed the meter.
That's it.. the house now has a new updated / modern load center, and the whole job cost me $240.00 all together (permit and new load center).
I now have ample room to add new circuits to the house, and as a bonus, this load center is "Generator Ready",
This upgrade will be a PLUS in the future if / when we try to sell the house.
During the installation, I had ZERO issues with the panel, it's construction, or the quality of the components used to make it. It did accept ALL of my old circuit breakers.
Note: I am not an electrician, but the Home Owner.
December 30, 2012
Rated 5.0 out of 5.0 by darkstar601 The Monster Box
As a home owner. I was upgrading all the electrical in one of are rental homes. This house is a large two story with a full basement. So I wanted a main service box to handle as many circuits as I wanted. Plus if we needed to add things in the future. It was easy to install and using 2 in conduit made it easy to get the 2/0 through it.
January 14, 2016
Rated 5.0 out of 5.0 by dr392 Good quality and was a good fit (literally) for my project
The quality seems excellent and installation presented no problems. Overall I am extremely happy with this purchase.
I was replacing an old ITE panel which had the service connections much higher up in the panel than the newer panels do. The guys at a local electric supply shop said this is typical and I was out of luck for an exact replacement. This Siemens panel was close enough that I could connect the old service wires. Thankfully the wires entered the house a few inches to the left of the old box which they had stuck into a corner and I got enough slack (barely) to reach the new box by moving the mount location to the left towards the wire entrance.
March 4, 2014
Rated 5.0 out of 5.0 by RAK Load Center
the load center is just what I was looking for. I used these panels before and like them
August 17, 2015