0707392962601

Simpson Strong-Tie

Model EPB44PHDG

Internet #100506799

Store SKU #621044

Store SO SKU #592854

4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base

$15.43 /each

Frequently Bought Together

Product Overview

Post and Column Bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures.

  • Added standoff adjustability to suit a variety of applications
  • Install in wet concrete
  • Provides the code-required 1 in. standoff when properly installed, allows up to 2-1/2 in. of standoff above concrete (if desired)
  • Not recommended for non top-supported installations (such as fences or unbraced carports)
  • Made from 12-Gauge steel
  • Hot-dip galvanization offers extra corrosion resistance for exterior and treated-wood applications
  • Install with 3/4 in. Dia anchor bolt and 16d common nails or #10 x 1-1/2 in. strong-drive SD screws

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions15 Answers

Customer Questions & Answers

4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
 
5 answers

When this is embedded in concrete, how is it adjustable?

This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
Asked by
Dave
July 23, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Oregon
Read all my Q&A
Home Improvement Profile: Professional
August 23, 2016
Answer: 
They only go in cured concrete. There is a completely different product for doing that.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Central Washington
Read all my Q&A
April 30, 2015
Answer: 
Dave, see that nut and washer on the bolt stem? The bolt inserts into the pier block/concrete pad hole, FLOATING, and the nut/washer assembly moves up and down to lower/raise the height of the hanger. (The washer rests on the surface of the concrete.) Just drop the base in the concrete hole - don't cement or epoxy it in!
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
April 7, 2015
Answer: 
I filled these blocks with concrete surrounding a metal conduit for the pier to slip into after it is set up. then you can adjust it with a wrench to level etc.
User submitted photo
User submitted photo
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Bothell, WA, USA
Read all my Q&A
May 28, 2014
Answer: 
I is not designed to be embedded, they are used with the concrete blocks. You can embed a thin wall pipe to set it in within the concrete, then use the adjustable function.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Pleasanton, CA
Read all my Q&A
July 25, 2013
Answer: 
Dave,
When embedding in wet concrete, the EPB44PHDG is to be adjusted to the desired height prior to setting the base. The 5/8" rod must be embedded a minimum of 4". Please see the following link for complete information, including installations secured with epoxy or supported by a nut: http://www.strongtie.com/products/connectors/epb44t.asp#.
Thank you!
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
 
3 answers

Can the EPB44PHDG be used with concrete pier blocks without set epoxy?

This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
Asked by
Read all my Q&A
August 24, 2014
Planning on using 6 sets of the concrete pier blocks with these post bases but not sure if the nut and washer would be sufficient to hold up a 10x12 deck without epoxy.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Central Washington
Read all my Q&A
April 30, 2015
Answer: 
I have used these for years, without epoxy, and never had a problem. If you are worried about wind uplift, then add in-ground hurricane tie-downs secured to the deck frame. We are still enjoying the10x12 and 8x16 decks here after more than a decade... The pier blocks were set level and have not shifted at all. (And we get gusts of up to 80 MPH!)
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Puyallup,WA
Read all my Q&A
August 26, 2014
Answer: 
Yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 26, 2014
Answer: 
The EPB44PHDG can be used with concrete pier blocks without set epoxy however it would be up to the Designer/Engineer of Record to calculate the demand loads for the deck and specify the appropriate connectors based on those loads, local building codes, etc. The published download values apply when secured with epoxy, supported by a nut or embedded in wet concrete; uplift loads do not apply when Read More
The EPB44PHDG can be used with concrete pier blocks without set epoxy however it would be up to the Designer/Engineer of Record to calculate the demand loads for the deck and specify the appropriate connectors based on those loads, local building codes, etc. The published download values apply when secured with epoxy, supported by a nut or embedded in wet concrete; uplift loads do not apply when installed to a pier block. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
 
2 answers

Weight limit

This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
Asked by
Kaufman, TX
Read all my Q&A
June 12, 2016
What is the weight limit that these can handle? Thanks.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 13, 2016
Answer: 
No weight limit is given, but the allowable load for the product is 1035/725 with a download of 3465.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 13, 2016
Answer: 
The EPB44PHDG has an allowable download capacity of 3,670 lbs. The uplift capacity depends on the anchoring adhesive used: 1,265 lbs. if installed with SET-XP and 985 lbs. if installed with AT-XP. Thank you!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
 
2 answers

these can be used for solid concrete also by drilling hole for the anchor bolt , or can they ?

This question is from 4 in. x 4 in. 12-Gauge Hot-Dip Galvanized Pier Block Elevated Post Base
Asked by
ft worth,tx.
Read all my Q&A
October 5, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Central Washington
Read all my Q&A
April 30, 2015
Answer: 
It depends on the thickness of the concrete pad you are drilling into. I would sure want at least 6" of concrete depth in order to keep that post/beam holder from wobbling around... If your pad is only about 4" thick, then do some serious cross-bracing on that post!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

October 7, 2014
Answer: 
Yes, the EPB44PHDG can be used in existing concrete. Drill a 7/8" diameter hole 4" deep minimum and fill the hole halfway with SET epoxy or drill a 13/16" diameter hole 4" deep minimum and fill the hole halfway with AT adhesive. Insert the EPB44PHDG and adjust to the desired height. The threaded rod shall be embedded a mimimum of 3 1/2". Minimum sidecover is 3" from the center of the threaded rod for Read More
Yes, the EPB44PHDG can be used in existing concrete. Drill a 7/8" diameter hole 4" deep minimum and fill the hole halfway with SET epoxy or drill a 13/16" diameter hole 4" deep minimum and fill the hole halfway with AT adhesive. Insert the EPB44PHDG and adjust to the desired height. The threaded rod shall be embedded a mimimum of 3 1/2". Minimum sidecover is 3" from the center of the threaded rod for both products. Thank you! Read Less
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0
2 »
  • 2016-09-08 T13:11:56.830-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100506799, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 206ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.9 out of 5 by 16 reviewers.
Rated 5.0 out of 5.0 by Love these things! Pier blocks have always required a high degree of accuracy in regards to setting proper depth to achieve a level finished product. Now, I just dig the pier block into the ground, setting the height within about 1 inch or so of level with each other and then fine tune the proper height via the adjustable hardware. August 2, 2016
Rated 5.0 out of 5.0 by Whether you are starting a project or adding support to an existing structure, either way these are vital. I have used these for years as the basis for any substructure. Don't even know why they bother making the non adjustable type. No shims, no errors. Adjustable at anytime in the future. Perfect. August 23, 2016
Rated 5.0 out of 5.0 by just what was needed used these to support 4x4 posts for a carport that was built on very rocky and uneven ground subject to frost heave in Michigan's UP. inserted the 3/4" threaded rod through 2 layers of 2x8 placed on top of a concrete half block which had been dug into the ground. made the proper height adjustment simple and easy and if the ground heaves I can easily handle several inches of movement. well made item. expect to use more on other other projects as well. very pleased with this item. July 26, 2016
Rated 5.0 out of 5.0 by Easy to use The pins fit into the pier block easily, without a lot of slop, to provide a solid hold. The bolt is easy to get to and to turn. July 12, 2016
Rated 5.0 out of 5.0 by Strong, adjustable, easy to work with product When expanding the deck, I tried this approach using 12X12 concrete blocks with this product. It made the leveling so much easier and at the same time distribute the weight better than digging a small hole. I just wish I used this method earlier... April 26, 2016
Rated 5.0 out of 5.0 by Worked like a charm! I used this to shore up a sagging deck. The ability to use a crescent wrench to slowly work the deck back to level was easy on the back and the mind. I highly recommend these for this purpose. They fit perfect on a pressure treated 4x4. July 29, 2014
Rated 5.0 out of 5.0 by Easy to install after the hole was drilled in the concrete. This product made it easy to level up my patio cover. combined with the Simpson strong Epoxy to anchor it, it should last for years September 22, 2015
Rated 5.0 out of 5.0 by Great product that does what it's designed to do. I've used this product before and it's ideal for being able to adjust a deck that may start to settle. It works great and I'd recommend it. July 21, 2015
  • 2016-09-08 T14:35:15.337-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_16, tr_16
  • loc_en_US, sid_100506799, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 100ms
  • REVIEWS, PRODUCT