Model # SET-XP10

Internet #204205071

Store SKU #163217

Simpson Strong-Tie 8.5 oz. Epoxy-Tie Cartridge
0707392233602

Simpson Strong-Tie

8.5 oz. Epoxy-Tie Cartridge

$20.26 /each

Frequently Bought Together

Product Overview

Ideal for anchoring threaded rod, rebar and smooth dowels in a variety of base materials, epoxy-based anchoring adhesives offer strength and versatility across a wide variety of applications. SET-XP is a 1:1 two-component, high-solids, epoxy-based anchoring adhesive formulated for optimum performance in both cracked and un-cracked concrete. When SET-XP adhesive is used with all threaded rod or rebar, the system can be used in tension and seismic zones where there is a risk of cracks occurring that pass through the anchor location. It is also suitable for un-cracked concrete conditions.

  • Teal color in order to be identified as a high-performance adhesive for adverse conditions
  • Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle
  • Use with CDT10S 10 oz. epoxy dispensing tool
  • Shelf life: 24 months from date of manufacture in unopened side-by-side cartridge
  • 8.5 oz.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question3 Answers

Customer Questions & Answers

8.5 oz. Epoxy-Tie Cartridge
8.5 oz. Epoxy-Tie Cartridge

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
This question is from 8.5 oz. Epoxy-Tie Cartridge
 
3 answers

how many per case

This question is from 8.5 oz. Epoxy-Tie Cartridge
Asked by
miami
Read all my Q&A
December 19, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
July 5, 2016
Answer: 
1 PER, I did not need a whole case
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Peoria AZ
Read all my Q&A
Home Improvement Profile: DIYer
April 28, 2015
Answer: 
Only used one tube so did not get a case. If I needed more than the 8.5 oz tube I would buy the two tube units. The only drawback to the two tube units is you need special applicator which is expensive. I invested in the applicator for the two tube units for larger jobs.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 22, 2014
Answer: 
Each unit includes 1 cartridge and 2 nozzles; there are 12 of these units per carton. Thank you!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T01:58:20.185-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204205071, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT

Customer Reviews

8.5 oz. Epoxy-Tie Cartridge is rated 4.4 out of 5 by 14.
Rated 3 out of 5 by from Product is a good idea and if tubes are fresh no problems. When buying watch out for tubes that a... Product is a good idea and if tubes are fresh no problems. When buying watch out for tubes that are old, check dates on tubes. out of 6 tubes I had tw0 defectives. Pain in the butt to return when you are busy.
Date published: 2016-12-03
Rated 5 out of 5 by from Keeping my posts where I want This stuff is super strong and sturdy. Used it to set threaded rods in concrete through 6x6 pressure treated beams. Bolted them down after it set up and this won't be going anywhere.
Date published: 2016-08-17
Rated 5 out of 5 by from easy to use product! Worth trying ,dried very secure and strong hold.great for my outdoor project.
Date published: 2016-10-25
Rated 3 out of 5 by from Not much usable epoxy I was surprised how few bolts I could glue - only about 5 - making it quite expensive per bolt. This is because (a) the mixer-nozzle holds a large fraction of the total epoxy that cannot be then used, and (b) it looks like a caulk tube, but has much less material in it. If you get this, don't waste too much at the beginning while getting it mixed - of course you need it well mixed, but as soon as it is, start using it.
Date published: 2015-11-10
Rated 5 out of 5 by from never used it, yet..... It is expensive. It looks like it will work great. I have not used it, yet. I had a work around using Titans instead of allthreads. Talk to your building and safety top dog type person and get a waiver. Some of you reading this may know what i am talking about.
Date published: 2016-04-05
Rated 5 out of 5 by from Worked just like I expected There was a little wasted material at the tip before the fully mixed material got there but after that an even mixture was maintained. Setting time allowed repositioning for precise fastener location.
Date published: 2016-06-26
Rated 5 out of 5 by from WORKED GREAT Hard to squeeze out but product works as stated. Used it in the rain and took 48 hours to dry Approx. Then applied pressure and the Epoxy held with no problems.
Date published: 2016-07-05
Rated 4 out of 5 by from Solid alternative for DIY Used to anchor post bolts for a deck. Followed the instructions and the epoxy mixed perfectly. No complaints, had 5 holes to fill, each with 2.5" embedment, figure there was probably enough left for 5 more holes before running out. Looked at the pro level gun that cost 70 bucks and it really doesn't make any since unless you are a professional. For your basic epoxy anchoring needs this does the job.
Date published: 2014-05-09
  • y_2017, m_1, d_20, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_, sid_204205071, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 69ms
  • REVIEWS, PRODUCT