0044315000607

Simpson Strong-Tie

Model LUS210Z

Internet #100375106

Store SKU #865889

Store SO SKU #592854

Z-MAX 2 in. x 10 in. Galvanized Double Shear Face Mount Joist Hanger

$1.52 / each
If you buy 50 or more
$1.29 / each

Frequently Bought Together

Product Overview

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson Strong-Tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field skewable and slopeable options. LUS joist hangers provide a connection between a joist and header.

  • Patented double-shear nailing design provides greater strength with fewer nails
  • Speed prongs for fast and easy installation
  • Angled joist nailing easier in tight spaces
  • Do not bend or remove tabs
  • Fits Joist Sizes: 2 in. x 10 in., 2X12, 2X14
  • Made from 18-Gauge steel
  • Z-MAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
  • Install with 10d common nails or #9 x 2-1/2 in. Strong-Drive SD screws

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions7 Answers

Customer Questions & Answers

Z-MAX 2 in. x 10 in. Galvanized Double Shear Face Mount Joist Hanger
Z-MAX 2 in. x 10 in. Galvanized Double Shear Face Mount Joist Hanger

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can I use SD10 instead of SD9

This question is from Z-MAX 2 in. x 10 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
Read all my Q&A
April 22, 2016
Can I use the SD10 2 1/2" fastener instead of the SD9 2 1/2" fastener? Home depot does not sell the SD9 2 1/2" fastener.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Seattle, WA
Read all my Q&A
April 26, 2016
Answer: 
I bought SD10 2 1/2" fasteners and they do not fit this joist hanger. Their diameter is larger than the double shear angled openings. Home Depot should carry the SD9 2 1/2 " fasteners that required.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 26, 2016
Answer: 
The LUS210Z has been tested/rated with the SD9. It has not been evaluated with SD10 therefore we cannot say how it would perform/affect the hanger. Many Home Depot stores do sell the SD9 screw. Please ask a Home Depot rep at your local store for assistance in locating or ordering. Thank you!
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
2 answers

Will they work on 2x12 treated

This question is from Z-MAX 2 in. x 10 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
Read all my Q&A
February 23, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

February 24, 2016
Answer: 
Based on size, the LUS210Z can be used with a 2x12 member, but it would be up to the Designer/Engineer of Record to evaluate if it is an appropriate hanger for the specific application based on framing layout, demand loads, local building codes, etc. Also, the LUS210Z has the Z-MAX coating which provides a medium level of corrosion protection. Please see the corrosion section of our website to determine Read More
Based on size, the LUS210Z can be used with a 2x12 member, but it would be up to the Designer/Engineer of Record to evaluate if it is an appropriate hanger for the specific application based on framing layout, demand loads, local building codes, etc. Also, the LUS210Z has the Z-MAX coating which provides a medium level of corrosion protection. Please see the corrosion section of our website to determine the recommended finish for your specific condition (i.e. environment, type of treated wood used, amount of chemical present, etc.). Thank you! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 24, 2016
Answer: 
Based on size, the LUS210Z can be used with a 2x12 member, but it would be up to the Designer/Engineer of Record to evaluate if it is an appropriate hanger for the specific application based on framing layout, demand loads, local building codes, etc. Also, the LUS210Z has the Z-MAX coating which provides a medium level of corrosion protection. Please see the corrosion section of our website to determine Read More
Based on size, the LUS210Z can be used with a 2x12 member, but it would be up to the Designer/Engineer of Record to evaluate if it is an appropriate hanger for the specific application based on framing layout, demand loads, local building codes, etc. Also, the LUS210Z has the Z-MAX coating which provides a medium level of corrosion protection. Please see the corrosion section of our website to determine the recommended finish for your specific condition (i.e. environment, type of treated wood used, amount of chemical present, etc.). Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Will 1 1/2" nails compromise the structural integrity?

This question is from Z-MAX 2 in. x 10 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
Wisconsin
Read all my Q&A
May 5, 2016
My deck has a 2x12" ledger board bolted directly to the poured concrete foundation, with joists spaced 16" on center. How will using Simpson 10d 1 1/2" nails, instead of 3 or 3 1/2" lengths, affect the structural integrity in securing the joists to the ledger?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

May 11, 2016
Answer: 
Dear Valued Home Depot Customer,
We reached out to MFG for more information and below is their response.
"For double shear hangers (such as the LUS210Z) with single 2x carrying members, use 10dx1 1/2" nails into the header and full length (3”) 10d commons into the joist, and reduce the load to 0.64 of the table value. Thank you! "
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Do Simpson Strong Tie LUS210Z joist hangers work for 2x12?

This question is from Z-MAX 2 in. x 10 in. Galvanized Double Shear Face Mount Joist Hanger
Asked by
Read all my Q&A
October 16, 2013
I have 2 x 12 joists and would like to add the extra support, does it work?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Pleasanton, CA
Read all my Q&A
October 17, 2013
Answer: 
David,
Provided the capacity is adequate for your demand load, the LUS210Z can be used with a 2x12 joist. Our recommendation is the hanger height be at least 60% of the joist height for stability. Please see the "2x12" section at one of the following links (based on header material) for the allowable loads:
Douglas Fir or Southern Pine
Read More
David,
Provided the capacity is adequate for your demand load, the LUS210Z can be used with a 2x12 joist. Our recommendation is the hanger height be at least 60% of the joist height for stability. Please see the "2x12" section at one of the following links (based on header material) for the allowable loads:
Douglas Fir or Southern Pine -
http://www.strongtie.com/products/connectors/hangertables/face_ss-df2.asp#
Spruce-Pine-Fir or Hem Fir -
http://www.strongtie.com/products/connectors/hangertables/face_ss-spf2.asp.
Thank you! Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
2 »
  • 2016-08-27 T15:42:29.040-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100375106, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 91ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;