Model # 997-010202020201

Internet #202254837

Store SKU #611859

Sioux Chief 1/4 in. Brass Compression Angle Needle Valve with Chrome Plating
0042805445457

Sioux Chief

1/4 in. Brass Compression Angle Needle Valve with Chrome Plating

$8.80 /each

Frequently Bought Together

Product Overview

The Watts 1/4 in. Brass Compression Angle Needle Valve with Chrome Plating. Includes a brass insert and comes completely assembled with a captive sleeve. This compression fitting features a durable, lead-free brass body that is interchangeable with standard compression fittings (not included).

California residents: see   Proposition 65 information

  • Brass construction provides durability
  • Threads are manufactured to high-quality standards and tolerances
  • Lead-free material contains less than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and plumbing fittings and fixtures
  • For use with copper, brass, aluminum, thermoplastic and plastic tubing when used with Watts insert #967-P (tubing and insert sold separately)
  • Not recommended for use with steel tubing
  • Not suitable for underground applications
  • Compression connections
  • 400 psi maximum working pressure
  • Assembled with a captive sleeve and includes a brass insert

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions5 Answers

Customer Questions & Answers

1/4 in. Brass Compression Angle Needle Valve with Chrome Plating
1/4 in. Brass Compression Angle Needle Valve with Chrome Plating

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

How can you tell if the angle needle valve is closed or open

This question is from 1/4 in. Brass Compression Angle Needle Valve with Chrome Plating
Asked by
alex
February 12, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Boulder, Colorado
Read all my Q&A
Home Improvement Profile: Professional
August 30, 2016
Answer: 
For practical purposes this needle valve will always be open unless it screwed all the way clockwise into the closed position. Reaching the closed position takes multiple turns. So, unless the valve is all the way clockwise it is open. Any other position it will pass some flow, although when it is close to being closed that flow rate can be very minuscule by design. Needle valves are not intended to be Read More
For practical purposes this needle valve will always be open unless it screwed all the way clockwise into the closed position. Reaching the closed position takes multiple turns. So, unless the valve is all the way clockwise it is open. Any other position it will pass some flow, although when it is close to being closed that flow rate can be very minuscule by design. Needle valves are not intended to be shut off valves except for the very occasional need to close them.
Closing a needle valve is not a strength event -- the valve has a fine pitch thread so it will be very easy to push the needle into the orifice enough to greatly suppress flow and also shut off flow -- so be gentle if shutting off flow is the goal. Again, needle valves are designed to throttle flow (control flow rate) not routine use as shut-off valves. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Indiana
Read all my Q&A
December 29, 2013
Answer: 
If the valve is open, water will come out...
-2points
2out of 6found this answer helpful.
Was this helpful?helpful2unhelpful4

Asked by
Retail Group
Read all my Q&A
February 18, 2013
Answer: 
Clockwise closes it
Counter clockwise opens it
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
2 answers

Indoor only?

This question is from 1/4 in. Brass Compression Angle Needle Valve with Chrome Plating
Asked by
Pacific NW
Read all my Q&A
June 20, 2016
Why does spec indicate indoor use only?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Pacific NW
Read all my Q&A
June 23, 2016
Answer: 
Why indoor only?
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 21, 2016
Answer: 
Yes, the 1/4 in. Brass Compression Angle Needle Valve with Chrome Plating is recommended for indoor use only.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
0 answers

Why indoor use only and description appears incorrect

This question is from 1/4 in. Brass Compression Angle Needle Valve with Chrome Plating
Asked by
Read all my Q&A
June 24, 2016
Why indoor use only? Obviously it can get wet. The valve appears as straight through and not chrome plated.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T01:50:05.638-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202254837, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.2 out of 5 by 6 reviewers.
Rated 5.0 out of 5.0 by This is a great needle valve -- if you need a shut-off valve get a ball valve This valve is a great needle valve and the price is excellent. It allows very precise throttling of flows, which is what needle valves are designed to do. It is not a shut-off valve so the reviews that give it low rankings because users attempted to use it incorrectly as a shut-off valve misapplied the product. Jamming the needle tightly into the orifice to shut off flow will damage the valve, although that poor practice will shut off flow for a limited number of uses. If you need a shut-off valve, or a less precise throttling valve, get a ball valve. A ball valve shuts off and opens for flow much faster than a needle valve so for that purpose a ball valve will save time and fulfill the intended purpose. Some very nice 1/4 inch quick connect ball valves are available at very reasonable prices. Look for plastic ball valves used with RO (reverse osmosis) systems, such as "Malida Equal Straight OD Tube Ball Valve Quick Connect Fitting 1/4-Inch by 1/4-Inch OD Valve Start RO Water System Set Of 5" August 30, 2016
Rated 4.0 out of 5.0 by will work great, if.... The first time I tried to use this, it failed miserably. I was using it with 1/4 inch plastic line for refrigerator water supply. They do not tell you that with plastic line, you need to also buy the ferrel (sp) inserts that go inside the plastic line. This keeps the outer brass thing from turning sideways when you tighten it up. I went back and bought those and it works perfect! December 29, 2013
Rated 2.0 out of 5.0 by Decreasing quality? I had one that worked great as a daily use shut off valve (to coffee maker) for 3 years. It then began to leak. I replaced it with a duplicate valve that did not work at all. Kept dripping from day one. Took that back for a replacement. It worked for 3 weeks before it began leaking like a sieve. I do not think these are intended as daily use shut off valves. December 29, 2014
Rated 1.0 out of 5.0 by Valve failed to shut off water. Used for water line to ice maker. Had trouble installing because ferrules wouldn't fit easily over the 1/4-inch copper pipe. Then, valve would NOT shut off the water, not even a little bit. Tightened lightly at first and then kept tightening more and more, but it still failed to shut off the water. These small valves are too fragile for reliable operation. Better to use larger ball valves. October 19, 2013
Rated 5.0 out of 5.0 by Simple valve, works great, does exactly what it should I installed this needle valve to control a water line to my under-cabinet water filter (which feeds a dedicated water faucet and ice maker. I have high water pressure where I live (~90psi); I first installed everything without a dedicated valve, and although none of my pipes/connections leaked, I wasn't comfortable with the high pressure running through the ice maker solenoid valve or the plastic push-in fittings on the water filter and water faucet. I wanted to reduce the pressure to put my mind at ease. This needle valve was just what the doctor ordered! I can open it up all the way for fast flow, turn it down to a slow trickle, or turn it off completely. I have absolutely no complaints about this valve. It was easy to install and works prefectly. It should be noted that I used 1/4 copper tubing for everything. I used plastic PE tubing originally (because it came with the filter), but I quickly replaced it all with copper. Perhaps I'm just paranoid, but I just don't trust plastic as much as copper when it comes to pressurized water lines (yes, I know PEX tubing is the "norm", but I still prefer copper). With regards to the connections, I didn't use the included compression nuts with captive sleeves. I used standard compression nuts and slide on ferrules for the copper tubing (you don't need a sleeve with copper). Also, just a tip for anyone who is new to compression fittings, use pipe thread sealant on the threads and a little bit on the ferrule, the lubrication it provides makes it much easier to properly seal the fitting. March 26, 2014
Rated 2.0 out of 5.0 by Survival Guide I am going to share what I have learned, as a typical DIY homeowner, having struggled with this little bugger for 3 days. I have seldom exerted so much energy for so little reward. First, the directions are POOR. Prep the tubing well (I will assume copper). Cut CLEANLY (tubing cutter, or if hacksaw, maybe rotary sand (Dremel) or file the end of tube after cutting.) Then use emery cloth or sandpaper to clean burrs off end of tubing. Don't let the tube flatten. Second, remove nut one end of valve. Then you are to FORCE the tubing into end of nut ("ferule" is inside) AND OUT THE OTHER END by 1/4 inch or so (says product support line). This requires substantial force and twisting motion and maybe a drop of dish detergent (lube). In fact, I think the ferrule is misdesigned, with an opening a bit too small for typical 1/4 inch copper. I have only a 50% success rate, even with a hammer. It's like trying to extrude copper "by hand." IF you don't get the tube all the way on, you risk constant seepage around where the nut fits onto the valve body. For copper, you do NOT need the tubing insert that is supplied, "they say." It will not hurt, "they say." Third, when you tighten down, rule of thumb is finger tight then 1/2 turn past. Alternate is finger tight then tighten until leaking stops. IF YOU TIGHTEN TOO FAR, the ferrule is destroyed, massive leak ensues, and you need to get a replacement nut/ferrule and start again, maybe even recut tubing. If the tube has some deformity (flattened) to it, it may not work no matter what, and you have to cut another 1/4 inch until you get to a well-shaped part. Good luck- glad I am "done" (I hope). November 7, 2013
  • 2016-10-31 T00:16:54.712-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_6, tr_6
  • loc_en_US, sid_202254837, prod, sort_default
1-6 of 6
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT