Sioux Chief 3 in. x 4 in. PVC DWV Closet Flange-886-PPK - The Home Depot

Sioux Chief

Model # 886-PPK

Internet # 202313218

Store SKU # 835684

3 in. x 4 in. PVC DWV Closet Flange

Sioux Chief 3 in. x 4 in. PVC DWV Closet Flange

This item has been discontinued.
The Home Depot no longer carries this specific product.

$3.47 / each


Model # 886-PPK

Internet # 202313218

Store SKU # 835684

This white 3 in. x 4 in. PVC DWV Closet Flange has a 7 in. face. It will fit over a 3 in. or inside a 4 in. pipe. This closet flange is meant to be used with a PVC pipe.

  • Made of PVC
  • Fits over a 3 in. or inside a 4 in. pipe
  • 7 in. face
  • Compatible with a PVC pipe
  • Note: product may vary by store


Assembled Depth (in.)  6.875 in  Assembled Height (in.)  2.25 in 
Assembled Width (in.)  6.875 in  Face size  7" 
Fitting size  3" x 4"  Product Height (in.)  2.0 
Product Length (in.)  7 in  Product Width (in.)  7.0 
Adjustable  No  Compatible Pipe Material  PVC 
Fitting or Connector Type  Flange  Material  PVC 
Maximum working pressure (psi)  0.0  Pipe or Fitting Product Type  Fittings & Connectors 
Product Weight (lb.)  6.309 lb  Push to connect  No 
Returnable  90-Day  Type  Closet 
Warranty / Certifications
Manufacturer Warranty  Lifetime 


Rated 4.5 out of 5 by 2 reviewers.
Rated 4 out of 5 by Simple, ez, cheap installation The ring top of my flange broke off when the builder's toilet was taken out. I panicked over possible plumbing bills. The plumbing department at Home Depot told me the correct way to repair the old flange was to completely chip it out. This simple, easy and cheap flange is what I chose from the selection of toilet flanges, including more expensive ones with more features. The top of this flange doesn't adjust. Initially I thought it would be easier to use a flange with an adjustable top ring. After one hour of slowly chipping out the old flange from inside the 4" plumbing pipe, I could barely hold a camera. The adjustable ring would not have helped. I eased it into the pipe with some gentle hammering with a towel or use a rubber mallet. You need a cement drill bit and cement screws to secure this flange on a slab. This was my first DIY toilet installation. After 2 Home Depot seminars, I was ready for it. They taught me simple is better. April 4, 2013
Rated 5 out of 5 by This is a basic 4 x 3 closet flange - one of the most popular types This is your basic 4 x 3 Closet flange, probably one of the most popular for new applications. It will fit over a pipe that's referred to a 3" pipe, however, if you measure the pipe across the top (outside diameter) it will read 3 1/2". The 4 x 3 works for this application. Keep in mind that some closet flanges have a beveled seat that keeps it from going down all the way if the pipe is cut to floor level. It won't fit if that's the case. This part sold on this page however, will sit on the floor properly if the pipe is cut level with the floor. Don't forget to screw the flange into the floor well with at least 4 stainless steel screws (#12 x 2" should do in most applications) and, make sure that the slots are lined up on the sides so the toilet mounting bolts fit properly BEFORE the glue dries. (5 - 10 seconds). November 17, 2014
1-2 of 2


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.