0039725033819

Skil

Model RAS900

Internet #205412338

Router Table Folding Leg Design

$139.00 /each

Frequently Bought Together

Product Overview

The RAS900 come pre-assembled with an integrated accessory storage bag and a laminated MDF top. The self-contained structure provides storage for necessary parts like the fence and router bits. Included with the RAS900 is a guard, feather board, miter gauge and bit inserts; along with a tall fence with adjustable laminated MDF faces; dual feather boards, a starter pin and guard for support when routing curved work pieces; a bit height gauge for easier bit setup and cutting precision, and additional accessory storage compartments. The RAS900 has a quick-release router mount that attaches and detaches in seconds. An efficient folding design means the table comes pre-assembled with minimal setup needed and legs fold for storage. Stability plus convenience makes this a great router table for any DIYer.

  • Accessory storage containers protect and store accessories with router table
  • Efficient folding design table comes preassembled with minimal setup needed, legs fold for storage
  • Quick clamp router mounting releases router in seconds for quick and easy bit changes without leveling
  • Starter pin and guard offers support for routing curved pieces
  • Bit height gauge for accurate cuts
  • Click here for more information on Electronic Recycling Programs

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

28 Questions37 Answers

Customer Questions & Answers

Router Table Folding Leg Design
Router Table Folding Leg Design

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Router Table Folding Leg Design
 
2 answers

Will a Ryobi R160 fit this table?

This question is from Router Table Folding Leg Design
Asked by
Read all my Q&A
April 30, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 2, 2016
Answer: 
The RAS900 will work with several manufacturers routers including the Ryobi 163K however we have not tested with the R160. If the 163 and 160 have the same mounting hole pattern then it will work. Otherwise if the holes in the mounting plate do not match your model you can mark off and drill the holes needed to match the router.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 1, 2016
Answer: 
It will fit.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from Router Table Folding Leg Design
 
2 answers

what is the best router for this table?

This question is from Router Table Folding Leg Design
Asked by
Read all my Q&A
February 20, 2016
will a 1 3/4 router work or do I need a more power full router?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

February 23, 2016
Answer: 
Thank you for your question. Our Skil model 1817 router would work great with the RAs900 router table. We also offer the 1830 combo pack that comes with both a plunge and fixed base so that you can leave the fixed base mounted to the router table and have a plunge base for above table applications. http://www.homedepot.com/p/Skil-1-3-4-HP-Fixed-Base-Router-1817/203362505
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

February 22, 2016
Answer: 
All Skil routers are compatible with this table.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from Router Table Folding Leg Design
 
2 answers

Can this table be used with Ryobi 180pl1 Router?

This question is from Router Table Folding Leg Design
Asked by
44129
Read all my Q&A
February 11, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

February 14, 2016
Answer: 
Yes, this table should be compatible.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

February 12, 2016
Answer: 
Thank you for your question. The RAS900 will work with most manufacturers routers including the Ryobi 163K. We have not tested the 180PL1 router however if the router does not match up with any of the pre-drilled holes you can mark off and drill the holes needed to match up with your router.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Router Table Folding Leg Design
 
2 answers

I have Skill 1817 router. Will it fit in this table?

This question is from Router Table Folding Leg Design
Asked by
Read all my Q&A
December 12, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

December 14, 2015
Answer: 
Thank you for your question. Yes, the Skil 1817 router will work with the RAS900. The manual does not list the model 1817 as it is a newer model than the router table however it will definitely mount to the adapter plate using the holes marked for model 1825.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Other
December 14, 2015
Answer: 
Hi Sohail, sorry that model is not one listed for this table.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
2 3 »
  • 2016-08-29 T16:29:26.227-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205412338, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 26 reviewers.
Rated 3.0 out of 5.0 by Not very well made. I give it 3stars because I had to drill a mounting hole for a router that was advertised as working without the modifications also it is very unstable. It had a chip is the fence and a cover on storage bin is mishap ended so it doesn't latch. The table has some nice features and works well after putting some bracing. I think it's a case of not enough quality control by the manufacturer. It will be used because it does have a lot to like about it. April 9, 2016
Rated 5.0 out of 5.0 by Good product The product was as advertised. Assembly was easy. It worked well for my application. April 27, 2016
Rated 4.0 out of 5.0 by Works Good Pros: Works well. Gets the job done Cons: Router mount would not work with my model Makita, so I had to drill my own holes in the mounting plate. Electrical outlets are difficult to access because they are facing towards router & get the cords in the way of mounting the router. The spread out legs limit you to placing on a bench or wide table or ground. Would be nice to have a depth adjustment. April 1, 2016
Rated 5.0 out of 5.0 by nice my only problem is getting enough of the bit length into my router. I have the router mounted as high as possible. Whatever they could do to get it closer would be appreciated. March 22, 2016
Rated 5.0 out of 5.0 by Exactly what I needed I needed a router table that I could move around in my garage because I was running out of room. It is nice and light yet durable. April 7, 2015
Rated 5.0 out of 5.0 by Easy setup, did the job. Had the router so I brought the same brand table. As a novice, it worked well after a few trials on scrap wood. I was able to take raw stock and make a picture frame for a fraction of the cost. Love the guides and clamp. Totally satisfied. March 8, 2016
Rated 4.0 out of 5.0 by lover this table the only problem with this taable is that i wish it was a little bigger. March 22, 2016
Rated 4.0 out of 5.0 by No regrets Everything as advertised and meet expectations , was satisfied with purchase February 19, 2016
  • 2016-08-29 T18:05:24.054-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_26, tr_26
  • loc_en_US, sid_205412338, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT