Model # 2406H

Internet #100654877

Smarthome SignaLinc Phase Coupler Hardwire


SignaLinc Phase Coupler Hardwire

$24.99 /each

Frequently Bought Together

Product Overview

Are lights or appliances in one area of your house having trouble receiving signals from Insteon or x10 transmitters in another area of the house? This common problem is easily correctable with Smarthome's Hardwired Insteon SignaLinc Phase Coupler (also called a signal bridge).

  • Install near the breaker box to provide the most efficient coupling
  • Tuned for Insteon signals - blocks other frequencies, like electrical noise
  • Simple two-wire design for superior performance
  • Award-winning Insteon technology provides superior performance and reliability




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

SignaLinc Phase Coupler Hardwire
SignaLinc Phase Coupler Hardwire

Ask your questions. Share your answers.

Clear Search Term
This question is from SignaLinc Phase Coupler Hardwire
1 answer

I have x-10 products. They switch on and off with a mind of their own. Will this prodcut help in my situation?

This question is from SignaLinc Phase Coupler Hardwire
Asked by
Fayetteville NC
Read all my Q&A
June 8, 2016
Controller disconnected from power source
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
San Diego, CA
Read all my Q&A
Home Improvement Profile: DIYer
August 16, 2016
Sorry, no. In my case I found that my neighbors were also using x10 devices. I would try switching to different settings ( i.e. Instead of A5 try D5, etc.). Because of a limited number of settings, I switched all my devices to Insteon. They are more expensive, but I don't have problems with neighbors turning on my lights in the middle of the night.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-30 T22:53:36.779-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100654877, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms

Customer Reviews

SignaLinc Phase Coupler Hardwire is rated 4.0 out of 5 by 2.
Rated 5 out of 5 by from This solved an intermittent problem. I have had the X10 or equivalent equipment in my home for 25 years. Most of the time is works well but it also fails. A light will not turn on or sometimes turns on but not off. I tried a capacitor type phase coupler but it burned out quickly. Not sure that it worked at all, it may have burned out in just days after installation. I tried the expensive signal booster with no apparent improvement. So now I have a Smarthome Signa Linc Phase Coupler hardwired into the breaker panel. I bought two intending to install the second one in a detached garage that has 140 feet of wire to it from the house. I also have a boat dock with 370 feet of wire to it from the house. This Phase Coupler solved the problem even without installing the second one. I have had reliable switching to the garage and boat dock for two months now.
Date published: 2012-04-14
Rated 3 out of 5 by from Works great, a bit costly Works great, instructions simpel and good, but pricey
Date published: 2013-07-09
  • y_2017, m_1, d_16, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_, sid_100654877, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms