Rated 4.5 out of 5 by 35
Rated 5.0 out of 5.0 by Bob Handled our need.
handled our needs and was easy to work with and install.
April 5, 2016
Rated 4.0 out of 5.0 by CS Fits in a tight space
This is exactly what I needed to vent a bathroom exhaust fan through the soffit. I have no attic space and this worked out just fine. I put a little screen on the inside prior to install.
April 5, 2016
Rated 5.0 out of 5.0 by Alan Great Vent !!!!!
Great product and easy to install. I replaced my other soffit vents with these. I did some additional attic ventilation so I purchased some more must have been over a dozen. Do yourself a favor get a good 1/2 inch chuck drill ( or barrow one ) with a 4 inch millwake hole saw and also some soffit baffles and attic mask and suit to install. You really need all and I heard some people just drill the holes but you have to open up the bays and install those soffit baffles. The only downside is they are not available in stores
June 3, 2015
Rated 1.0 out of 5.0 by Bee Not what I wanted
This product did not open or close It was stationary and no real flange to screw into opening. We are returning it and did not bother to install unacceptable product.
February 10, 2016
Rated 5.0 out of 5.0 by Roy Great vents
They are very easy to install and they look great. Our customers really like these vents. Shipping time is great. This is not our first use of these, We will use these again.
October 6, 2015
Rated 4.0 out of 5.0 by Gs47 4 inch vent
While the event is made of heavy plastic, it requires a 4 inch hole to fasten securely. However, That will leave no room for your method of securing your vent pipe or tube. I used a 4 1/4 inch hole and about three drops of silicon adhesive and that worked well. If you have access to the backside of the wall, it would not be an issue. Looks nice
October 7, 2014
Rated 5.0 out of 5.0 by jeffreyg72 Soffit Vents worked perfect
The soffit vents are of good quality and provided the needed ventilation after they were installed.
November 4, 2014
Rated 4.0 out of 5.0 by TDogg Does its job quite well
Inexpensive, easy to install. Stays in place on own for now, but I can see the need for screws through the flange if it is has to be removed and re-installed for painting the soffits. Fortunately, the flange is plenty large to accomodate this. The flex duct holds secure with use of a zip tie (not included but required by code in a few municipalities). This is a case of simple is better in my opinion and our fans work many times better than they did when ducts were routed up and looped around a rafter brace by the original builder.
July 23, 2013