Model # FSG2J21CP

Internet #100199433

Store SKU #739667

Square D 30-50 psi Pumptrol Pressure Switch
0047569807855

Square D

30-50 psi Pumptrol Pressure Switch

  • Suitable for jet pumps, submersible pumps and reciprocating pumps
  • Standard-action contacts open on rising pressure
  • Provides rugged and reliable performance
$17.88 /each

Frequently Bought Together

Product Overview

The Square D by Schneider Electric Pressure Switch can be used with jet pumps, submersible pumps and reciprocating pumps. The switch has a 1/4 in. pressure connection.

  • Suitable for jet pumps, submersible pumps and reciprocating pumps
  • Standard-action contacts open on rising pressure
  • 30 - 50 psi
  • 1/4 in. pressure connection

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions8 Answers

Customer Questions & Answers

30-50 psi Pumptrol Pressure Switch
30-50 psi Pumptrol Pressure Switch

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can the pressure be adjusted

This question is from 30-50 psi Pumptrol Pressure Switch
Asked by
Read all my Q&A
June 17, 2016
Downstairs pressure is OK but upstairs is much lower
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 20, 2016
Answer: 
Yes, pressure may be adjusted. Adjust in proper sequence: 1. Cut-in. Turn large range nut down (clockwise) for higher cut-in pressure, or up (counterclockwise) for lower cut-in pressure. 2. Cut-out. Turn smaller differential nut down (clockwise) for higher cut-out pressure which increases the differential between cut-in and cut-out, or up (counterclockwise) for lower cut-out pressure which lowers Read More
Yes, pressure may be adjusted. Adjust in proper sequence: 1. Cut-in. Turn large range nut down (clockwise) for higher cut-in pressure, or up (counterclockwise) for lower cut-in pressure. 2. Cut-out. Turn smaller differential nut down (clockwise) for higher cut-out pressure which increases the differential between cut-in and cut-out, or up (counterclockwise) for lower cut-out pressure which lowers the differential between cut-in and cut-out. Please make small, incremental adjustments and test pressures. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Canyon, CA
Read all my Q&A
Home Improvement Profile: Professional
June 18, 2016
Answer: 
Yes! The Maintenance and Troubleshooting Guidelines document, available from the Home Depot website details the procedure for adjusting either the cut-in pressure or the differential pressure between cut-in and cut-out. Here is a link to that PDF file:
http://www.homedepot.com/catalog/pdfImages/5e/5e6ebcc0-8f21-4d40-9322-7fc3d56608f5.pdf
There are two hex nuts inside the cover of the control that Read More
Yes! The Maintenance and Troubleshooting Guidelines document, available from the Home Depot website details the procedure for adjusting either the cut-in pressure or the differential pressure between cut-in and cut-out. Here is a link to that PDF file:
http://www.homedepot.com/catalog/pdfImages/5e/5e6ebcc0-8f21-4d40-9322-7fc3d56608f5.pdf
There are two hex nuts inside the cover of the control that are used to make adjustments. The above referenced document offers plenty of details about how to properly adjust the control I am including an image of part of the document to help give you an idea of the procedure without bringing up the entire document... Read Less
User submitted photo
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
1 answer

40/60

This question is from 30-50 psi Pumptrol Pressure Switch
Asked by
NJ
Read all my Q&A
September 13, 2016
My switch is currently set to 30/50, can I run it at 40/60?
Do I turn the nut clockwise till I get 60 psi reading on the gauge?
I take it I need to put air in the tank before I do this? about 38psi for 40/60 operation?
Pump: 1/2 hp, 230v, 1p
Well tank: Well-Rite WR100-03 (rated up to 100 psi) precharged at 30
Thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 13, 2016
Answer: 
Thank you for inquiry. The settings may be adjusted. Adjust in the proper sequence: 1. Cut-in: Turn the large range nut down for higher cut-in pressure (clockwise), or up for lower cut-in pressure (counterclockwise). 2. Cut-out: Turn the smaller differential nut down for higher cut-out pressure (clockwise) which increases the differential between the cut-in and cut-out, or up for lower cut-out Read More
Thank you for inquiry. The settings may be adjusted. Adjust in the proper sequence: 1. Cut-in: Turn the large range nut down for higher cut-in pressure (clockwise), or up for lower cut-in pressure (counterclockwise). 2. Cut-out: Turn the smaller differential nut down for higher cut-out pressure (clockwise) which increases the differential between the cut-in and cut-out, or up for lower cut-out pressure (counterclockwise) which lowers the differential between cut-in and cut-out. Recommended to have 2psi difference in switch setting and pressure tank. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Factory Settings Out of the Box

This question is from 30-50 psi Pumptrol Pressure Switch
Asked by
Read all my Q&A
July 5, 2016
Does the unit come preset from the factory with a preset cut-in cut-out range? or does each one require adjustment?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 7, 2016
Answer: 
Pumptrol pressure switches are shipped preset per their specific Pressure Setting Codes. FSG2J21CP is factory set On at 30psi/Off at 50psi.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
1 answer

Is the square d FSG2J21CP pressure switch suitable for a 5 hp submersible pump

This question is from 30-50 psi Pumptrol Pressure Switch
Asked by
New Hampshire
Read all my Q&A
March 22, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 24, 2016
Answer: 
No. The Type FSG2 is good for 2HP max 230V single phase, 3HP max 230V three phase.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-10-30 T22:14:39.785-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100199433, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.5 out of 5 by 16 reviewers.
Rated 5.0 out of 5.0 by Exact Replacement Exact replacement. Should only be installed by a person knowledgeable in both plumbing and electricity. October 11, 2016
Rated 4.0 out of 5.0 by Replacement for 30+ year old same model I did make an error in purchasing this specific model. I missed the fact that it had a flare style inlet and my existing pump had compression fittings on the pressure tube. So back to the store to get a couple adapters to make my compression pressure tube adapt to the inlet on the switch. After that it was smooth sailing. They haven't significantly changed the design of this switch in decades, hey if it ain't broke...., so it was very easy to swap out the new one for the old malfunctioning unit. I ordered two of these since the pump at my camp is exhibiting the same symptoms (sometimes won't shut off by itself) and is old, but unknown how old since I inherited the camp from my Dad. January 26, 2016
Rated 4.0 out of 5.0 by Replaced Water pressure switch Exact replacement for water pressure switch that was 7 years old. Drop in replacement. Old one had burned out contacts. This one will probably last 7 years but at least it was easy to put in. April 19, 2016
Rated 5.0 out of 5.0 by Exactly what I needed These switches aren't overly expensive, but when they go bad, you really need one fast! Thanks Home Depot for getting it so quickly. January 12, 2016
Rated 5.0 out of 5.0 by Works great Replaced one that was 26 years old with same product. November 10, 2015
Rated 3.0 out of 5.0 by Average Purchased this regulater a year ago for a new well. It failed in one year, have bought numerous regulators over the years for different wells but have never had one fail so quickly. Contact points moved somehow and it fails to make proper contact. July 28, 2015
Rated 5.0 out of 5.0 by Replacement Control Hits the Spot! The old well pump pressure switch stopped working, so a new one was purchased from Home Depot to match the old one. The match was perfect, therefore the installation was easy. The old switch lasted several decades, and appeared to have failed due to unavoidable fouling of dirt and corrosion. I see no reason why the new switch shouldn't provide several MORE decades of reliable service! Terrific product!! April 15, 2014
Rated 4.0 out of 5.0 by Perfect. Just what we needed. Great price. Easy purchase, having it delivered to the store. Great transaction. October 14, 2014
  • 2016-10-30 T20:16:30.202-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_16, tr_16
  • loc_en_US, sid_100199433, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT