0047569838002

Square D

Model # QO130CP

Internet # 202353302

Store SKU # 146420

QO 30 Amp Single-Pole Circuit Breaker

$6.74 /each

Frequently Bought Together

Product Overview

The Square D by Schneider Electric QO 30 Amp One-Pole Circuit Breaker is intended for overload and short-circuit protection of your electrical system. The ANSI-certified and UL-listed unit is rated for 120/240 VAC and 10,000 AIR. All QO circuit breakers are equipped with the exclusive Visi-Trip indicator. When a QO Visi-Trip circuit breaker trips, the handle snaps to a midpoint position between "OFF" and "ON" and a highly visible, red indicator easily identifies the tripped breaker. This enables you to easily distinguish which breaker has tripped in a load center that may contain up to 42 different circuit breakers. QO circuit breakers have features no other manufacturer can offer. They come in many different sizes and can meet the needs of virtually every function in your home or business. These types of quality, industry exclusive products keep the Square D brand ahead of the competition and are builders' and electrical contractors' first choice in electrical protection.

Specifications

Dimensions

Product Depth (in.) 
2.92 
Product Height (in.) 
3.5 
Product Width (in.) 
0.75 

Details

Breaker Type 
Single Pole 
Electrical Product Type 
Breaker 
Interruption Type 
Standard Trip 
Maximum Amperage (amps) 
30 
Mounting type 
Plug In 
Number of Poles 
Power Distribution Features 
Trip Indicator 
Product Weight (lb.) 
0.27 lb 
Returnable 
90-Day 
Voltage (volts) 
120/240 

Warranty / Certifications

Certifications and Listings 
1-UL Listed 
Manufacturer Warranty 
Square D warrants its branch circuit breakers to be free from defects in material and workmanship under normal care and proper usage in a residential installation, for the lifetime of the QO load center in which it is installed. 

More Products With These Features

Search

Customer Questions & Answers

3 Questions3 Answers

Customer Questions & Answers

QO 30 Amp Single-Pole Circuit Breaker
QO 30 Amp Single-Pole Circuit Breaker

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Can I replaced a 20 Amp for a 30 Amp

This question is from QO 30 Amp Single-Pole Circuit Breaker
Asked by
Read all my Q&A
December 4, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

December 5, 2015
Answer: 
Simple answer is no. If you replace a breaker with a higher amperage breaker then the breaker will not trip when it should. The breaker amperage must match the wire size for that amperage.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Will this item fit into a nqob panel

This question is from QO 30 Amp Single-Pole Circuit Breaker
Asked by
Read all my Q&A
November 4, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 6, 2015
Answer: 
No. NQOB panelboards accept bolt-on style branch circuit breakers, i.e., QOB130.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

my circuit breakers have prongs on the back of them to go into the box do these?

This question is from QO 30 Amp Single-Pole Circuit Breaker
Asked by
upstate south carolina
Read all my Q&A
February 1, 2014
there are brass like prongs that go into the breaker box from the breaker. understand my knowledge of electrical wiring is 0. I am just simply trying to replace a 20 amp with a 30 amp so my breaker stops tripping when i have a space heater and the microwave going at the same time. the house was built in 1961 and it appears to have all of the original wiring.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 6, 2014
Answer: 
This sounds like you may be referring to the plug on stabs that connect to the bus of the load center installed in your home however you may not want to proceed with just simply replacing a smaller breaker with a larger ampacity simply to stop the breaker from tripping. When the breaker was originally sized and installed, 20A may have been selected because that may have been all that the wiring in the Read More
This sounds like you may be referring to the plug on stabs that connect to the bus of the load center installed in your home however you may not want to proceed with just simply replacing a smaller breaker with a larger ampacity simply to stop the breaker from tripping. When the breaker was originally sized and installed, 20A may have been selected because that may have been all that the wiring in the walls can handle. If you are continually tripping your breakers, you may want to consult a qualified electrician to evaluate why the breaker is always tripping. You may be overloading the circuit, or alternately there could be an issue not visible to the naked untrained eye. I am not saying this is the case in your home but essentially you may be creating a fire hazard if you install a larger 30A breaker and the circuit can not handle that load. Please be advised that we can not evaluate this situation for you and it would be best for the safety of you and your family to have an electrician take a look for you. Please also be advised that consulting an electrician may incur costs out of Schneider Electric's control and responsibility. With that being said, if you still require additional assistance locating the proper model breaker, or installing it please feel free to reach out to us once you have determined it is safe for you to increase the ampacity of that circuit. We can be reached at CIC-Technical@schneider-electic.com, or alternately call us from 8a to 8p ET at 888-778-2733. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-07-22 T14:39:11.990-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202353302, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 251ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 5.0 out of 5 by 1 reviewer.
Rated 5.0 out of 5.0 by would recommend this works great for our needs. It fit perfectly in the breaker box that we have which is an olderone. September 20, 2011
  • 2016-07-22 T14:47:37.187-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_202353302, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 251ms
  • REVIEWS, PRODUCT