Free Shipping and BOPIS

Model # I350D-000-HDA0D

Internet # 202403142

2 in. x 1/2 in. Satin Black Angled Metal Baluster Shoe

This item has been discontinued.
The Home Depot no longer carries this specific product.

$1.89 /each




Model # I350D-000-HDA0D

Internet # 202403142

The satin black angled shoes are specifically designed to ease the installation of iron balusters. They provide a smooth & elegant transition from the bottom of the handrail or the top of the knee wall to the satin black baluster collection. They also ensure the installation holes, drilled to insert the balusters are completely covered up. The angled shoes have the same high quality satin black finish as their baluster counterparts. From stair treads, stair railing and a complete selection of stair parts, SureWood-LNL has what you need to make your stairs beautiful.

  • Flat shoes provide a clean, crisp transition from the metal baluster to the wood components of the stair system
  • Powder-coated, high quality satin black finish is ready for installation
  • Use angled shoes where the baluster meets the angle/rake of the handrail or on knee-walls
  • Shoes come with factory-set 45-degree angle. Use a belt sander or grinder to adjust angle to fit your stair
  • Perfect accent to your stair railing system

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Color Family 
Number of balusters included 
Product Weight (lb.) 
0.2 lb 
Stair Part Type 
Water Resistant 
Warranty / Certifications
Manufacturer Warranty 


Rated 2.0 out of 5 by 7 reviewers.
Rated 4.0 out of 5.0 by Looks great I read the reviews when ordering but felt i didn't have much choice. I replaced 86 balusters requiring 172 shoes- angled and square. I found that by creating a small wedge from heavy stock paper cut into 1/2" x 1/2" strips and folded and placing this wedge opposite the set screw did the trick. When the set screw was snugged the wedge prevented the tweaking and gaps i read about. Takes a while and the use of needle nose pliers helps with placing the wedge- but all 86 of my top shoes are perfect and look great. Should modifications like this be necessary when you buy a product? No, But given the alternative of no shoe, a crooked shoe or a perfect fitting shoe - the time and no cost fix is worth it when your done. No grinding required. August 31, 2015
Rated 1.0 out of 5.0 by Poor Design I was required to glue the part on the the entire banister in place because the set screws forces the angled part away from the rail and creates a 1/4" gap. Just a poor and cheap design on the manufacturers behalf. They should have put the screw on an angle like the parts Home Depot carried 1 year ago. February 15, 2014
Rated 1.0 out of 5.0 by Incredibly poor quality The quality control on these is basically non-existent. After I glued the balusters in, I was shocked to find that the failure rate on these is about one in five. The allen wrench heads strip very easily, so they cannot be tightened into place. Many tightened but then stripped, so I'll never be able to move them again for repairs. I ended up having to either glue them down or rip out balusters and replace them February 20, 2013
Rated 1.0 out of 5.0 by Terrible design The design of the angled baluster shoe is awful. Tightening the screws causes the shoe to bow up on some of them, but not all. Change the design so the screw come in on the side, not the front. Some installed easily, others needed shims to keep it straight. You couldn't tell by looking at them which would work and which wouldn't. To finish your job, order twice as many as you need and pray you get lucky. Out of the 24 I needed, 10 installed easily and 14 needed a lot of extra work. May 5, 2015
Rated 1.0 out of 5.0 by Poor quality Baluster shoes are poorly made. Hex (Allen) set screws are not consistent in size. Requires three different allen tools. Also when tightening set screws the shoe torques sideways leaving a large gap between shoe and wood rail and/or base plate. February 3, 2015
Rated 5.0 out of 5.0 by Easy to install We decided to redo our stair rail...easy to install, price was better online than in store....we were going to use them only on the bottom, however decide to place them on the top also...2nd order came fast...we finished the whole project quicky...i love the transformation of the stair case April 30, 2014
Rated 1.0 out of 5.0 by Poor Design Placement of the set screw causes the shoe to pull away from the banister leaving an ugly gap. Recommend picking up a tube of black adhesive caulk and gluing in place, skip the set screws all together. May 5, 2014
  • 2015-10-03T12:04:22.382-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_7, tr_7
  • loc_en_US, sid_202403142, prod, sort_default
1-7 of 7