Model # I354D-H01-0000D

Internet #202403148

Stair Parts 44 in. x 1/2 in. Satin Black Single Knuckle Metal Baluster

Stair Parts

44 in. x 1/2 in. Satin Black Single Knuckle Metal Baluster

$10.97 /each

Frequently Bought Together

Product Overview

Satin black metal balusters provide the perfect accent to the natural warmth and beauty of wood. Transform your home with our simple designed double knuckle baluster or mix and match the double knuckle baluster with any of the other metal balusters to provide a distinct design for your homes’ stairway. Additional decorative knuckles can be added to create a baluster design that is truly yours. From stair treads, stair railing and a complete selection of stair parts, Surewood-LNL has what you need to make your stairs beautiful.

  • Hollow construction allows for easier cutting without sacrificing stability
  • Powder-coated, high quality satin black finish is ready for installation
  • Iron balusters coupled with the natural warmth and beauty of wood create a striking European design
  • Check local building codes, but typically balusters should be spaced so that a 4 in. sphere cannot pass thru any point along the stair system
  • Additional finishes and designs of metal balusters are available

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

44 in. x 1/2 in. Satin Black Single Knuckle Metal Baluster
44 in. x 1/2 in. Satin Black Single Knuckle Metal Baluster

Ask your questions. Share your answers.

Clear Search Term
2 answers

how do you fix a square baluster in a round hole in the hand rail?

This question is from 44 in. x 1/2 in. Satin Black Single Knuckle Metal Baluster
Asked by
6116 n strathbury ave
Read all my Q&A
July 3, 2014
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
November 25, 2014
You don`t. You can use a special punch to punch out a square hole but I`m guessing you will need the larger round hole to be able to get the baluster into its setting in the first place. Best thing to do if you are using that method is install it with Epoxy. Fill the hole around the baluster with epoxy. You will probably want to fix a shoe over the top to hide the hole and glue. Good luck!
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

July 25, 2014
Is it possible you could upload a picture, I'd like to help and want to give you the best possible answer. Thank you!
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-10-22 T16:39:11.790-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202403148, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 92ms

Customer Reviews

Rated 3.9 out of 5 by 8 reviewers.
Rated 5.0 out of 5.0 by Beautiful Balusters!! I purchased these balusters, scroll balusters, and shoes for a staircase renovation. These were beautiful and very well made. The price of these were half of some of the specialty iron stores. This was my first DIY project and these balusters look amazing... The picture speaks for itself. May 12, 2015
Rated 4.0 out of 5.0 by Works but not perfect Knuckle can be moved by loosening hex bolt. There is a riased line left where the knuckle originaly was. I do not know if it is a build up of paint or what. It was only on one side so I was able to orient it toward the back. It worked out for me. February 23, 2016
Rated 2.0 out of 5.0 by Good product but there is a catch The product is sturdy and the paint is good. However the item is painted with the “knuckle” in place. Although the knuckle is held in place by an allen screw, underneath the knuckle is raw, unfinished metal. Thus preventing the end user from moving the knuckle at all, otherwise “ugly” metal will be visible. November 3, 2015
Rated 3.0 out of 5.0 by product needs improvement I was disappointed that I could not move the knuckle up or down because where the knuckle was positioned on the iron rail it was not painted. I also had to remove the knuckle off the iron baluster a lot because the hole at the top of the iron baluster was on the same side as the allen screw holding the knuckle on, so when you went to put cap at the top of the baluster the screw for the cap would go in the hole instead of tightening up on the baluster. June 16, 2015
Rated 5.0 out of 5.0 by Satin Black Single Knuckle Metal Baluster They look very nice. I have seen the same Balusters in multiple homes. July 28, 2015
Rated 3.0 out of 5.0 by Nice product but... So the railing turned out beautiful but a few things to remember. First, I never checked it but the length is 44". I don't need 44". So we had to cut them down. Well, the squares are movable with an allen wrench, however the spindles are painted AFTER they are placed. So, we ended up having to cut them, remove the squares, sand them, replace the squares and paint. So, even tho they look great, there was a lot of work involved. Make sure they are the size you need! Oh and a few were chipped and would have needed touch up anyway. April 10, 2013
Rated 5.0 out of 5.0 by Really really good! I bought these as a start for my installation to see how it went. They arrived earlier than expected, and were beautifully packaged each in individual plastic sleeves, so no damage at all.That was one of my biggest concerns. Yes, you need to cut them down to size (that would be true for virtually any installation I would say) and the knuckles need to be repositioned, but it`s not difficult - they come off easily with an allen key, just sand rough medium and then smooth, and spray paint with a can of satin black, then reposition the knuckle. I`ve done 12 today and it took no more than a couple of hours. They look fantastic, are amazing quality for the price and I`m thrilled to bits with them. Will now be placing an order for the rest of the ones I need. I installed these with the LJ Smith iron pro fixings and they worked beautifully. I wish Home Depot sold those too, but they don`t so I had to go elsewhere for those. Don`t know who the manufacturer is (they came from Georgia) but big shout out to them - great quality, very well packaged, sent promptly, no drama, no hassle. November 25, 2014
Rated 4.0 out of 5.0 by Easy to install We decided to redo our stair was very easy to cut, easy to install, price was better online than in store....few chip paint on some of them...but easy fix April 30, 2014
  • 2016-10-22 T13:15:03.781-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_202403148, prod, sort_default
1-8 of 8
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 72ms