Stairtek 0.625 in. x 11.5 in. x 42 in. Unfinished Red Oak Retread-XBTRO1142 - The Home Depot
Message to Our Customers
Discontinued

Stairtek

Model # XBTRO1142

Internet # 202185494

0.625 in. x 11.5 in. x 42 in. Unfinished Red Oak Retread

Stairtek 0.625 in. x 11.5 in. x 42 in. Unfinished Red Oak Retread
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$26.38 / each
Loading...

PRODUCT OVERVIEW

Model # XBTRO1142

Internet # 202185494

The Stairtek 42 in. x 11-1/2 in. Unfinished Red Oak Retread is made of solid, 100% oak and has a bold grain pattern. It can lend a warm look to your decor and is recommended for interior use.

  • 42 in. x 11-1/2 in. x 5/8 in. approximate dimensions
  • Made of 100% solid red oak
  • Unfinished, stain or varnish to enhance the grain and complement your decor
  • For interior use only

SPECIFICATIONS

Dimensions
Assembled Depth (in.) 
42.0 in 
Assembled Height (in.) 
0.625 in 
Assembled Width (in.) 
11.5 in 
Maximum Height (In.) 
0.625 in 
Maximum width (in.) 
11.5 
Product Depth (in.) 
42 
Product Height (in.) 
0.625 
Product Width (in.) 
11.5 
Details
Color Family 
Red 
Interior/Exterior 
Interior 
Material 
Wood 
Prefinished 
No 
Primed 
Bare 
Product Weight (lb.) 
8.8 lb 
Retread 
Yes 
Returnable 
90-Day 
Stainable/Paintable 
Stainable 
Stair Part Type 
Tread 
Water Resistant 
No 
Warranty / Certifications
Manufacturer Warranty 
1 year Structural Warranty 

CUSTOMER REVIEWS

Rated 4.9 out of 5 by 15 reviewers.
Rated 5.0 out of 5.0 by Great product for prefab stair case The treads allowed me to cover the bull nose of the prefab unit without having to cutting it off. The bull nose and cove of the retread was long enough to cover the old tread and the edge of the riser without any extra effort. I will use them again. February 3, 2015
Rated 5.0 out of 5.0 by Grain match was dead on, no warpage, packed in boxes-excellent. I must say that I was impressed when I opened the boxes and found styrofoam between the treads to protect each piece. No damage was found on the 18 treads in the order. Grain selection on each piece was excellent. Minor sanding before staining was required as with any production woodworking supplies. Overall a 5 for quality, speed of delivery and price March 13, 2012
Rated 5.0 out of 5.0 by Stairtek0.625 in. x 11.5 in. x 42 in. Unfinished Red Oak Retread WE first cut the retreads to length. They were stained and three coats of polyurethane. We then glued and nailed the retreads in place. July 9, 2013
Rated 5.0 out of 5.0 by The retread made it so easy to redo my stairs after carpet. The matieral was easy to cut, glue and nail down. The stain turned out a darker red than gunstock color I was going for but that is a beginners mistake. Just an easy way to cover your stairs after carpet. October 1, 2013
Rated 5.0 out of 5.0 by Great Product! This product is awesome. My husband and I ripped out carpeting on our stairs and then installed these retro retreads. The stairs are gorgeous and much easier to keep clean than the carpeting. We bought the stair step tool for measuring each stair that is sold separately. It sped up the process and was totally worth the $20. If you have tools (table saw, compound miter saw, etc...) and carpentry skills these should not be a problem to install yourself. April 10, 2013
Rated 5.0 out of 5.0 by Surprisingly easy system to use! This system was very easy to use, especially if you watched the 3 minute youtube video avaialble for it. The only major requirement is a good saw capable of cutting the 12 inch wide stair treads. Make sure you use the Stairtek installation tool to account for any out-of-square situation with the old stair system. July 22, 2014
Rated 5.0 out of 5.0 excellent quality I bought these treads to renovate our staircase which was covered in tired ugly carpet. We had replaced all of the carpet in the house with oak laminate, but wanted real oak for the staircase. We stained the treads to match the laminate perfectly and polyurethaned them before installing. I bought some extra treads in the longer length and made my own winders using a biscuit joiner and templates. I also bought the tread measuring tool which was money well spent. I cut my own risers out of oak ply as I needed them to be just half inch depth rather than 3/4. Installed with PL400, stairs feel solid and look fabulous. September 17, 2013
Rated 5.0 out of 5.0 by Love them We sanded and sprayed poly on them. To get them to match my current floor we did a quick swipe of oak stain. Love them, they are gorgeous. Would definitely recommend them. April 29, 2014
  • 2015-05-02T11:58:25.799-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_15, tr_15
  • loc_en_US, sid_202185494, prod, sort_default
2 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.