Rated 3.9 out of 5 by 11
Rated 3.0 out of 5.0 by Brant Save your money and buy poplar and then paint them yourself
If you have the time, buy the poplar board at your local store and then paint it white to match your trim. The boards are fine, quality wise and saves you time, but you can save money by just buying the wood and making your own boards. Plus you can then buy to the specific height of your risers.
September 6, 2016
Rated 5.0 out of 5.0 by Sunny Love My New Stairs
My new white front stairs are beautiful! It is what I have always wanted. I did wood laminate and have received loads of compliments.
May 24, 2016
Rated 4.0 out of 5.0 by angelt its ok
I ordered five of these and they showed up about a week later. Four of them were in decent shape but the last one split
Towards the bottom. If there was a problem with such a small quantity I imagine there would be a problem if you ordered enough for an entire staircase. Also you can probably find something to use that's a little cheaper if you shop around or don't care what kind of wood you use.
May 14, 2013
Rated 4.0 out of 5.0 by DGNH Very good quality, wish they were higher
Good quality wood, no warping, easy to work with. My only complain is the riser is too low. It is cut exactly for the standard stair height, mine happened to be just a tad higher - which created a lot of extra work for me to cut and attach spacers. So measure your stairs before buying.
January 13, 2015
Rated 3.0 out of 5.0 by redt Not for obsessive perfectionists
Stairtek riser arrived in a timely manner,well packaged. I had read reviews and wanted to make sure I had enough to do the job even if there was a problem in quality or I made a mistake .I didn't make any mistakes.The lighting in the stairway is direct sunlight and quite harsh in the morning sun.It shows planer chatter marks under the twice primed and sanded finish because of the light and a semi-gloss white.I don't know if I would use them again. I would have to really assess the location and such.
November 22, 2012
Rated 5.0 out of 5.0 by Chris Interrior stair project using primed white poplar risers.
I removed the carpeting from my stairs and replaced it with these primed white poplar risers and brown slate flex tiles for the treads and stair turnaround. I cut the risers to size length wise, painted them and bonded and nailed them in place using 18 gauge brad nails (1 3/4" lg) from a nail gun with the pressure set correctly. The stairs look great, the white risers look and worked great for this project.
November 19, 2013
Rated 2.0 out of 5.0 by DIYers2 Disappointing product
Not ready to paint right out of the box, required work before painting. The top and bottom edges of the risers had chips (some rather large). A couple had dips on the front that may not be sanded out enough to use. Others had smaller chunks on the front that had to be filled and sanded in order to have a smooth front. All had to be reworked before painting. One was found to be defective (split) to the point that it is not useable. Very disappointing product!!
July 23, 2012
Rated 5.0 out of 5.0 by kg1953 Best price, good product
product is exactly as expected; came promptly; looks good
November 12, 2013