0876176001512

Stairtek

Model BTROC1136

Internet #202185480

1 in. x 11.5 in. x 36 in. Unfinished Solid Builder Grade Red Oak Tread

Was  $21.57
$20.49 /each

Save $1.08 (5%)  through 08/31/2016

  • Solid red oak accepts stain beautifully
  • Great product for converting carpet stairs to wood
  • Highly rated for quality and value (see reviews)

Frequently Bought Together

Product Overview

The Stairtek 36 in. x 11.5 in. Unfinished Builder Grade Solid Red Oak Tread is a solid all red oak tread that has some mineral streaks and small knots for character. This durable tread may be stained to complement your decor. Perfect choice to go with Rustic flooring. California residents: See Proposition 65 information.

California residents: see   Proposition 65 information

  • Tread dimensions are 1 in. x 11.5 in. x 36 in. with bullnose on the front
  • Solid red oak construction no laminates or finger joints
  • Stainable for a customizable finish and presanded on top side
  • Edge-glued design for stability and durability

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions9 Answers

Customer Questions & Answers

1 in. x 11.5 in. x 36 in. Unfinished Solid Builder Grade Red Oak Tread
1 in. x 11.5 in. x 36 in. Unfinished Solid Builder Grade Red Oak Tread

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

will they cut these for you in the store?

This question is from 1 in. x 11.5 in. x 36 in. Unfinished Solid Builder Grade Red Oak Tread
Asked by
Bemidji MN
Read all my Q&A
July 16, 2015
will they cut them after they are stained and finished?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
northern california
Read all my Q&A
Home Improvement Profile: Professional
July 13, 2016
Answer: 
yes they can cut them to size but for a perfect and pro look you gonna need what called a stair wizard no walls are straight so no two steps will be perfectly the same you tube it to see how it works
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Crossville, AL 35962, USA
Read all my Q&A
Home Improvement Profile: DIYer
November 12, 2015
Answer: 
I'm sure they will... the staff is pretty good at helping with your projects!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Anonymous
265 Waycross Road, Greensburg, Pa. 15601
October 5, 2015
Answer: 
Yes ! as long as you give them the measurements..
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

July 23, 2015
Answer: 
Dear Valued Home Depot Customer,
Thanks for your question.
Please contact our Online Customer Service Department at 800-430-3376 to get more assistance with this item.
We are available daily, between 6:00 a.m. and 2:00 a.m. (Eastern Time)
Thanks The Home Depot User Generated Content Team
-7points
0out of 7found this answer helpful.
Was this helpful?helpful0unhelpful7
 
2 answers

Are there solid oak treads or a composite?

This question is from 1 in. x 11.5 in. x 36 in. Unfinished Solid Builder Grade Red Oak Tread
Asked by
Buffalo
Read all my Q&A
April 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

April 26, 2016
Answer: 
This is solid red oak construction.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Crossville, AL 35962, USA
Read all my Q&A
Home Improvement Profile: DIYer
April 26, 2016
Answer: 
The treads are SOLID wood - and ARE VERY NICE!
I have had them installed for over a year, and had absolutely NO problems with them.
My treads were originally covered with carpet - using an extremely rough sub-floor base, and
were deeper than the available tread width. I purchased two extra treads and ripped them (about 2 to 3"
strips) and glued them to the back edge of the tread to get the required
Read More
The treads are SOLID wood - and ARE VERY NICE!
I have had them installed for over a year, and had absolutely NO problems with them.
My treads were originally covered with carpet - using an extremely rough sub-floor base, and
were deeper than the available tread width. I purchased two extra treads and ripped them (about 2 to 3"
strips) and glued them to the back edge of the tread to get the required coverage. I also drilled through the added tread from the back and spaced three screws to secure the spliced part.
Like I said - over a year and it is in perfect shape!
My project was two sets of stairs - from the basement to the main floor, then another from the main floor to the second level.
BTW: project met my wife's approval... so it must have been good!
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Is there any reason I shouldn't use these to make a butcher block counter top for a kitchen island?

This question is from 1 in. x 11.5 in. x 36 in. Unfinished Solid Builder Grade Red Oak Tread
Asked by
Baltimore, MD
Read all my Q&A
July 7, 2016
Of course I would need to cut off the rounded edge to fit the pieces together. My question is mainly regarding safety for using with food.
Does HD sell 1' thick oak boards that aren't stair treads? (I have not been able to find them).
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
northern california
Read all my Q&A
Home Improvement Profile: Professional
July 13, 2016
Answer: 
you could use this for butcher block you would just need to sand it a few times staring with a 80 grit on up to a 120 until it is smooth enough to run your hand across it all about the finish you apply to the butcher block you might wanna do some more research is the right one for food prep
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Can these be installed over existing?

This question is from 1 in. x 11.5 in. x 36 in. Unfinished Solid Builder Grade Red Oak Tread
Asked by
Woodstock, NY
Read all my Q&A
February 9, 2016
Can these be installed over existing builder grade treads? The stairs are currently carpeted over plain unfinished pine boards and I'm hoping not to have to rip the staircase apart.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
March 7, 2016
Answer: 
No way install over the old one is gone squick
-5points
1out of 7found this answer helpful.
Was this helpful?helpful1unhelpful6
2 »
  • 2016-08-18 T13:10:34.928-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202185480, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 54 reviewers.
Rated 4.0 out of 5.0 by Great stairs! Very easy to work with and a great quality stair tread. March 3, 2016
Rated 5.0 out of 5.0 by Basement steps I had it delivered for free at my Home Depot and had the worker cut them to my measurements when I picked them up. I glued them down and stained them and came very nice. July 26, 2016
Rated 4.0 out of 5.0 by Solid piece of oak I didn't need a star tread. Instead I needed a good solid heavy piece of oak ant this met my needs very well after a couple of cuts. Nice straight grain and well planed wood. March 1, 2016
Rated 4.0 out of 5.0 by Really Nice Looking Stair Treads I tried to figure out ways to most easily and cost effectively spruce up my old, painted basement stairs, and finally decided that replacement would probably be the best compromise between cost, quality and ease, and these oak treads seem to offer just that: They are really nice looking. I think they'll go in fairly easily, and what's not to like about oak? February 13, 2016
Rated 5.0 out of 5.0 by Why spend more, these treds are great quality. Since you have to sand and stain them anyway, why would anybody pay twice as much for "1st quality". These treds are very very nice, after proper prep ther is no way you could have a better outcome. The one thing I will say is get a couple more than you need, I needed 12 and bought 14 just to have more grain patterns to choose from (and I'm glad I did), I returned the 2 that I did not choose at my local store. I pulled my old treds off, painted my risers and installed my new stained and finished treds and my finished project is way nicer than I imagined, what a great bang for your buck upgrade. March 27, 2013
Rated 1.0 out of 5.0 by This product has some problems! This product is made of up to 7 pieces of glued up strips of wood...beware. If you are looking for a clear select product this not!!! for you. It is made of a number 1 red oak that has tons of color variation in the piece and dark mineral(black) is the normal. Also the bottom has glue and wood voids that do not allow you to leave this exposed. On one of ours it went all the way to the edge that you could not finish the end due to wood voids. This is a rustic wood product and the description should be accurate. August 21, 2013
Rated 3.0 out of 5.0 by Red Oak Tread 2 of the treads cracked when putting in the screws. I still used them. I think next time i would use 1 1/2" to 2" thick instead of 1". February 23, 2016
Rated 5.0 out of 5.0 by Good quality, great value, timely arrival Of the ten treads I received, only one had very minor worm holes (1mm size and only a few, not a problem). A quick, light sanding with 100 grit, followed by three coats of urethane (sanding with 220 grit in between) created "perfect" oak stair treads. February 14, 2012
  • 2016-08-22 T13:55:55.041-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_54, tr_54
  • loc_en_US, sid_202185480, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms
  • REVIEWS, PRODUCT