0076174680102

Stanley

Model # 68-010

Internet # 100139004

3 in. Multi-Bit Ratcheting Screwdriver

$9.95 /each
  • Includes 10 bits that store inside handle
  • Magnetic bit holder for easy bit changes
  • Resists corrosion, chipping and breaking

Frequently Bought Together

Product Overview

This Stanley 3 in. Multi-Bit Ratcheting Screwdriver includes 10 different bits that conveniently store in the handle for quick and easy access on the job. The ergonomically designed handle offers comfort for your hand and maximum torque at the fastener head, while the magnetic bit holder allows for speedy and secure bit changing with little effort. Designed to resist corrosion, chipping and breaking, this high-quality screwdriver is built to last.

  • Tips range from standard to Philips to Torx style to square for a precise fit
  • Ergonomic, textured-finish handle achieves maximum torque with minimum effort
  • Set includes 10 bits and bit storage system with #1 and #2 Philips, 3/16 in. and 1/4 in. slotted and T-15 and T-20 Torx to accommodate a variety of jobs
  • Magnetic bit holder ensures speedy and secure bit changes
  • Handle storage provides quick and easy access to bits
  • Materials designed to resist corrosion, chipping and breaking for a long life

Specifications

Dimensions

Assembled Depth (in.) 
3.5 in 
Assembled Height (in.) 
1.7 in 
Assembled Width (in.) 
4 in 
Handle Length (in.) 
Shaft length (in.) 
3.0 
Tip size 
Variety Pack 

Details

Color Family 
Black 
Drive Style 
Combination 
Hand Tool Type 
Individual or Specialty Screwdriver 
Handle Material 
Plastic 
Individual/Set 
Individual 
Number of Pieces 
10 
Ratcheting 
Yes 
Returnable 
90-Day 
Tools Product Type 
Hand Tool 

Warranty / Certifications

Manufacturer Warranty 
n/a 

More Products With These Features

Search

Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

3 in. Multi-Bit Ratcheting Screwdriver
3 in. Multi-Bit Ratcheting Screwdriver

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
2 answers

I have this screwdriver. how do I open the storage part of the handle to change bits?

This question is from 3 in. Multi-Bit Ratcheting Screwdriver
Asked by
washington dc
Read all my Q&A
April 2, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Washington VA
Read all my Q&A
May 18, 2015
Answer: 
As stated in the first response, the bottom rotates to open the storage part of the handle. However, that is only for the current models. The older version, which you may have, does not have a storage port in the handle.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 2, 2015
Answer: 
The handle rotates allowing the bits to be removed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-07-25 T21:26:34.582-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100139004, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.0 out of 5 by 25 reviewers.
Rated 5.0 out of 5.0 by Great tool Works perfectly. Now my husband can keep his tools and I have this for me. December 29, 2015
Rated 2.0 out of 5.0 by Not What I Expected I was only looking to replace the 1/4" driver for my socket set; saw this and figured it would be a nice upgrade. It's really not that well made. The ratchet sort of works but I find just using it in the locked position works best. The cap on the top of the handle holds the bits in place, but it won't tighten. If you get it "almost tight" it pops off. The plastic is too soft to get it really well seated. I find I have to check it every so often because if not, it'll pop off and then you're hunting for bits. The bit holder at the top of the drive is very handy but a bit hard to get the bits out and won't hold bits from other sources. Should have gotten the 1/4" driver and not gone for the flash and dash :-/ May 26, 2015
Rated 2.0 out of 5.0 by Poorly Designed Not Great Quality The bits stored in the collar require some other tool (nail file perhaps?) to extract them. The cap at the butt end loosens as you use tool. Inside same cap, the plastic moldings for holding bits are not shaped properly. And it's just less hassle to use the non-ratcheting setting. Better yet, an old fashioned screwdriver is more solid. May 31, 2015
Rated 5.0 out of 5.0 by Best non-pro screwdriver on the market I'm not sure if maybe I got a fluke, but this ratcheting screwdriver is hands down the best ratcheting screwdriver I've ever used, besides Snap-On but they cost $75-100. The grip is easy on my hands and the rubber part lets you really put a lot of torque into it. The ratchet function is incredibly smooth, definitely a fine tooth mechanism that reminds me of how smooth a GearWrench ratcheting wrench feels like, no slipping, and almost zero drag, easily selectable forward, reverse or fixed-non ratchet. I also appreciate the on bit storage, and have no problems with the butt cap coming unscrewed while I use it, the previous posters should lift some weights or something and tighten the cap down tightly so it doesn't come unscrewed. Best value ratcheting screwdriver I've ever used, I'll be buying my brother one for a cheap Christmas present. Previously I HATED ratcheting screwdrivers, but after buying this one it's the only driver I reach for unless I need a special size for something. March 28, 2015
Rated 5.0 out of 5.0 by Great all-in-one This is a super useful, strong as nails little screwdriver set. I originally bought one for my home (vs workshop) tool kit, but liked it so much that I bought two more, one for the workshop and one as a gift. May 16, 2015
Rated 5.0 out of 5.0 by Excellent addition to my toolbox this product allows keeps everything together as far as a screwdriver goes. no need to have multiple screwdrivers - just change out the head for the size and shape you need. March 24, 2015
Rated 4.0 out of 5.0 by does what you need it to do. It's sturdy and has a good grip. Easy to switch from the left and right drive, but it is a bit bulky. You can't really fit 5hat many heads in the storage area because of the design on the inside, and the plastic tabs break easy on the cap lid for some reason. The bits on the head are difficult to get out, but all in all, it's sturdy and does the job. I would recommend this for the price. December 20, 2014
Rated 3.0 out of 5.0 by Handy but awkward... Came with a reasonable supply of bits, but the on board storage of same makes the device a little awkward to use, as does the relative difficulty of changing the direction of the action without using both hands. But hey….it was cheaper than buying a whole set of screwdrivers. October 21, 2014
  • 2016-07-27 T01:39:18.226-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_25, tr_25
  • loc_en_US, sid_100139004, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • REVIEWS, PRODUCT