Model # Mini 3

Internet #203210888

Stiebel Eltron Mini 3 3.0 kW Point-of-Use Tankless Electric Water Heater

Discontinued Stiebel Eltron

Mini 3 3.0 kW Point-of-Use Tankless Electric Water Heater

  • Same-day installation in most areas. Call 1-855-400-2552 by noon.

Frequently Bought Together

Product Overview

Stiebel Eltron developed tankless electric water heating technology almost 90 years ago and continues as the industry pioneer and world leader. Our engineering and manufacturing tradition of excellence means you can depend on the performance and reliability of our products. Instead of storing hot water, Mini Series models are tankless, heating water instantaneously and endlessly as it flows through the unit. They are 99% efficient, and, unlike tank-type water heaters, have no stand-by energy losses. No venting is necessary, and the sleek, super-compact design even allows for installation with the unit visible. Mini models are ideal for residential and commercial point-of-use hand-washing sink applications including: bathrooms, cabins and cottages, office buildings, stores, malls, warehouses, restaurants, and gas stations. Mini models are sized based on the flow rate of the sink you are plumbing for hot water. The temperature of the hot water delivered by a Mini depends on the temperature of the incoming cold water, the water flow through the unit, and the size of the Mini model that is installed. Mini models excel at supplying water at a constant temperature rise but must be carefully matched to the application in order to operate properly. Refer to the Mini Sizing Guide and Temperature Rise Chart under 'More Views' to determine which model you need. Call Stiebel Eltron at 800.582.8423 if you have any sizing questions.

  • Professional installation recommended
  • Mini 3 tankless electric water heaters are designed to provide warm water around 90 to 100 degrees F for hand washing at 1 standard flow (0.5 gpm) sink
  • Mini 3 models require 120 volt electric service, 1 dedicated 30 amp breaker, and 10 gauge copper wiring
  • Mini 3 models are shipped with 0.5 gpm pressure compensating flow reducer/aerators that fit on most faucets and should be installed
  • The Nichrome (nickel-chromium) bare-wire heating element in all Mini Series models is controlled by a flow switch to prevent dry-firing and failure, and is additionally equipped with a safety high-limit with manual reset
  • Mini Series tankless water heaters were meticulously engineered in Germany and are manufactured in the US with great care and with the best available materials to provide years of trouble-free service
  • Installation should be as close to your draw off point as possible to make the wait for hot water as short as possible and maximize energy savings
  • Mini tankless electric water heaters do not need pressure relief valves, drains, or circulating pumps
  • The super-compact design is considerably smaller than even a mini-tank, saving space and allowing flexibility to determine the best location for installation
  • Mini tankless electric water heaters are exempt from seismic code and must be installed vertically with the water fittings pointing either up or down
  • Mini tankless water heaters are ETL Listed for compliance with CSA and UL safety standards in the US and Canada
  • See warranty for complete details of the 3-year residential and commercial warranty against defects in workmanship and materials under normal use
  • Stiebel Mini Sizing Guide:

    Stiebel Mini Sizing Guide

  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Customer Reviews

Rated 2.8 out of 5 by 18 reviewers.
Rated 5.0 out of 5.0 by works great! Serious pain to set up! Bought for bathroom sink farthest from water heater. It used to take literally over 5 minutes to get warm water to this sink, this unit fixed the problem perfectly! That said, now the bad part, The mini 3 requires a dedicated 30 Amp circuit so, had to run a new circuit with 10 gage wire from a new 30 amp GFI breaker in box, to comply with power switch in sight codes, I had to use a 30 Amp on/off switch near the heater which is perfect anyway because it not only provides the junction point, but also allows you to turn heater off if you have it on so long that the already heated water arrives. This is where it really got interesting however, because it is a 120 volt single phase circuit yet the color of the wires from heater were black, brown, and green with yellow banding. I am a professional technician, therefore I already knew the green is ground. The manual does NOT reference the wire colors and it incorrectly showed the order of wires on the diagram as Line, Neutral, then Ground, side by side in that order. When you actually open the unit it shows the Neutral, Line, then Ground labeled on the unit! I was able to follow the circuits and determine that the labeling on the heater is correct and manual is wrong, therefore (and this is critical if you expect the unit to function properly) the BROWN wire is the Line, the BLACK wire is the neutral and, as I previously mentioned, the GREEN wire is the ground. I hope this info will save others from a lot of wasted time trying to get the info from the internet which had absolutely no help for the color codes. The best I can guess is the German Engineering inspired to EU standard Brown colored Line wire, I am clueless why some Einstein decided to make the neutral BLACK! It was a pain for me because I had already placed the box inside sink cabinet and attached water lines by the time I discovered the issue with the wires and it was a REAL pain in the rear to open box though ultimately I ended up having to anyway to determine the Line circuit to complete the installation. Having gone through all this fun, I must say it works awesomely! Good Luck! February 23, 2014
Rated 1.0 out of 5.0 by Luke warm at a weak flow Product provides the bare minimum of a weak flow of water at a luke warm temperature. It is strictly for a hand wash station. You have to install the flow restrictor which provides a very weak flow similar to public restrooms. To be fair, our water intake (industrial setting) is probably in the mid 30 degree F range. Recommendation would be to go to a larger heating capacity/flow. The unit itself seems put together ok, just provides very little warm (not hot) water. If you use a moderate flow of water, the temperature is still cold. February 4, 2014
Rated 2.0 out of 5.0 by Not much bang for the buck Requires a separate 30 amp breaker. At 3.0KW I expected a little more hot water than the unit puts out. You have to severely restrict your water flow just to get enough warm water to wash your hands. I am not even certain why they put scald warnings on this thing. Aside from having to run a dedicated circuit to the unit, the rest of the installation is a snap. I am using this as a point of use water heater for a spare bathroom sink on the far end of my house. July 8, 2014
Rated 1.0 out of 5.0 by Big mistake The advertised item was not what it advertised to be. We purchased it for heating water under our kitchen sink, because it takes forever to get hot water from the water heater. But, when my husband called customer service about how to install it (because the instructions included were inadequate), they said it was not meant for our, we had to return it. Waste of time and money! September 23, 2014
Rated 5.0 out of 5.0 by Very statisfied customer of this product When I purchased this product it was directly from the company so I am glad to see Home Depot selling it now. It was built solid with all metal copper parts. It was not hard to install if you are able to do basic plumbing and electrical work. About a year ago I had to replace one of the units inside due to my fault not the companies. Replacing the broken unit was very easy. I just disconnected the plumbing and electrical wires and the broken unit just unplugged and I plugged in the new unit and reconnected everything. I felt it was really designed well. As with all tankless water heaters you must get the size you need. I have a three unit heater and it gets the water really hot but unable to a shower and wash the dishes at the same time. I wish I had gotten the larger unit. One last thing is that when I have called the company they have always been very friendly and helpful. April 2, 2014
Rated 1.0 out of 5.0 by So So Had it installed by a professional handyman and installation was easy. The warm water is very intermittent and does not stay warm long. I expected it to be a little warmer and more consistent. Would not recommend. July 8, 2014
Rated 3.0 out of 5.0 by Somewhat disappointed I purchased this product for my pottery studio. The water only gets luke warm, which is OK for my needs, but if I had purchased it to work in my home I would have returned it. You have to put a regulator on the faucet which reduces the water flow to allow the water to heat sufficiently, so now I have a slower stream of water that doesn't get very hot. January 28, 2014
Rated 5.0 out of 5.0 by Does its job well I installed this unit in my guest bathroom where getting hot water was an interminable wait, which wasted water as well. It was relatively easy to install and hook up, though working under the sink is a pain! I had to have an electrician run an outlet circuit first. The rest of my house is on a tankless heater, so this just runs downstream. Simple solution to an age old problem. July 16, 2013
  • 2016-10-26 T16:24:55.780-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_18, tr_18
  • loc_en_US, sid_203210888, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms