Model # BMS4900

Internet #203065758

Store SKU #364345

Suncast Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
0044365019499

Suncast

Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed

  • 98 Cubic feet of available storage space
  • Designed to fit below 6ft. fence line
  • Perfect for roll in storage of bicycles and lawn mowers
$399.00 /each

Frequently Bought Together

Product Overview

Suncast Horizontal Shed is a just-the-right-size storage option because they fit in places other Shed can't. With their low profile, horizontal Shed sit below most standard fence lines yet are big enough to store your tools, equipment and recycling bins. Like all Suncast products, these horizontal Shed are built for durability, designed to protect your stuff from weather and look good doing it.

  • Long lasting easy to maintain double wall resin structure
  • Sliding lid for walk in access
  • Easy bolt, secure assembly that requires minimal tools
  • Reinforced sturdy floor for heavier items
  • Ideal for storage of bikes, mower, extra patio furniture and so much more
  • Foundation required not included
  • 98 cu. ft. storage capacity
  • Door opening: 46-1/4 in. W x 46-1/4 in. H
  • Can be built with 1 or 2 people
  • Approximately 45 min to 1.5 hour for assembly

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

104 Questions333 Answers

Customer Questions & Answers

Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
 
9 answers

Can this shed be locked?

This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
Asked by
Reba
Berkeley, CA
March 18, 2013
Are there holes/grooves for an external lock to be attached?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Dallas, TX
Read all my Q&A
July 11, 2016
Answer: 
yes, it can be locked but can easily be broken into. The little slots where the padlock
goes into... can be ripped off pretty easily with a good pair of plyers. You can also
lock it where the door handles are, but it wouldn't hold up to a crowbar. In summary,
you need to put this shed in a protected yard, and don't advertise you have valuables
inside.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Batavia, IL
Read all my Q&A
June 22, 2015
Answer: 
Yes, the Suncast Glide Top shed may be locked by using a padlock. Thank you for your interest in Suncast.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Everett, WA
Read all my Q&A
October 14, 2014
Answer: 
it has a place that you can lock the two doors and the roof.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Fall City, WA 98024, USA
Read all my Q&A
June 10, 2013
Answer: 
Yes, there is a place to secure a padlock at the top for the sliding
roof door and front doors.
If you look closely, you can see my padlock in the photo.
User submitted photo
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
San Diego
Read all my Q&A
May 6, 2013
Answer: 
Yes there is a hole for a padlock where the roof and doors come together but it is flimsy. Locking it may deter honest people but anyone determined to do so would be able to break in easily. I don't put high-value or easily pilfered items in the shed. (That likely would be true for me for most garden sheds, however.)
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Addison IL
Read all my Q&A
April 30, 2013
Answer: 
Yes
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Moore, OK, USA
Read all my Q&A
April 9, 2013
Answer: 
yes it can be locked, thru the lid and the door at the front of the shed.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Read all my Q&A
March 27, 2013
Answer: 
Yes, both at the door handles and the top where the roof attaches.
User submitted photo
User submitted photo
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

March 18, 2013
Answer: 
Howdy Reba,
There is a part formed portion on the front right side of the lid and right door that allow you to put a lock on the lid. This will also allow you to keep the door from opening as well.
Happy Shedding,
Coach Dave
User submitted photo
User submitted photo
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
 
7 answers

Can a hungry bear open a locked shed?

This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
Asked by
Quemado, NM
Read all my Q&A
March 7, 2015
I'm interested in using this as a dumpster for bagged household trash that a medium sized black bear has learned a taste for. If I secure the shed to the foundation and lock it, is it likely that the bear can break it open? Damage it?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Stanford, MT
Read all my Q&A
August 7, 2016
Answer: 
I live in Montana and trust me, a hungry bear can open or destroy most anything if they put their mind to it. Believe me when I say that any type shed like this, will not be much of a hindrance to a bear and that is not a negative reflection on the product itself, just an observation on bear ability.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Wylie, TX
Read all my Q&A
July 18, 2016
Answer: 
Really depends on how smart the bear is. Some of those locks can be tricky especially without opposable thumbs. Pandas are one of the main species of bears with an opposable like thumb but you should be good if you are only concerned about black, brown, grizzly, and other species.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Metro Detroit area
Read all my Q&A
March 22, 2016
Answer: 
If you put garbage in this shed and the bear is hungry than buy a heavy steel shed. This shed is resin, which means plastic. It's well made, but not for big animals.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Alabama
Read all my Q&A
November 3, 2015
Answer: 
Absolutely a black bear can easily break open this resin shed and devour the contents inside. You need to be looking at steel or concrete enclosures.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
The Woodlands, TX
Read all my Q&A
June 9, 2015
Answer: 
I would say yes as the shed is made out of molded plastic and the shed roof is just push open. You could add a lock but a hungry bear will get in if he wants to.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Corona, CA
Read all my Q&A
April 21, 2015
Answer: 
If locked at the top (see photo) it secures the sliding top door and the two doors. Bears are mighty resourceful but it will be a challenge. They would have to tear/chew through the plastic and you might want to eliminate the door handles.
It's a good unit and stands up against strong Santa Ana winds but might be questionable against a medium sized determine black bear.
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
S. Florida
Read all my Q&A
March 8, 2015
Answer: 
It has 3 locations to lock it but I would think a bear could rip this thing apart in no time. I wouldn't care to spend spend four or five hundred to try it. I would get a local welder to put some basic box together for you out of solid steel
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
 
7 answers

Does it have a floor?

This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
Asked by
Cll
Cheyenne
May 5, 2013
+3points
3out of 3found this question helpful.
Was this helpful?helpful3unhelpful0

Answers (7)

Asked by
Iowa
Read all my Q&A
August 13, 2013
Answer: 
Yes.
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
Marion, Iowa
Read all my Q&A
May 14, 2013
Answer: 
Yes it has a nice vinyl type material floor that the sides attach to. The floor creates about a 1 1/2" high ramp to run your rolling equipment inside. The floor feels very firm under your feet and comes in two pieces that are screwed together.
Hope this helps.
+12points
12out of 12found this answer helpful.
Was this helpful?helpful12unhelpful0

Asked by
San Diego
Read all my Q&A
May 6, 2013
Answer: 
Yes, the shed has a floor made out of the same material as the rest of the unit. Because the whole shed, while pretty sturdy, is comparatively light, I placed some bolts through the floor into the cement slab on which I placed the shed.
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0

May 6, 2013
Answer: 
Yes, the Suncast Glidetop Resin Storage Shed Model BMS4900 comes with a durable resin plastic floor. Thank you for your interest in Suncast products.
+8points
8out of 8found this answer helpful.
Was this helpful?helpful8unhelpful0

Asked by
Liberty Hill, TX, USA
Read all my Q&A
May 6, 2013
Answer: 
Yes
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
California
Read all my Q&A
May 6, 2013
Answer: 
yes it has a floor, about 1 inch -2 inch thick
+8points
8out of 8found this answer helpful.
Was this helpful?helpful8unhelpful0

Asked by
Read all my Q&A
May 5, 2013
Answer: 
Yes, comes in two pieces and fits together like a puzzle. Seems pretty durable but you need a solid surface as a base or it will most likely crack at some point. It is just plastic. We put sand and pavers. Time will tell if that was enough.
+15points
15out of 15found this answer helpful.
Was this helpful?helpful15unhelpful0
This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
 
6 answers

Does it hold a regular size push lawnmower?

This question is from Glidetop 6 ft. 8 in. x 4 ft. 10 in. Resin Storage Shed
Asked by
Read all my Q&A
November 3, 2014
I can't tell from the picture if there was a need to fold/undo the lawnmower push handle and lay that down...
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
S. Florida
Read all my Q&A
February 11, 2015
Answer: 
It will fit.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Woburn, MA
Read all my Q&A
January 13, 2015
Answer: 
I can fit a snowblower and a lawnmower in this without folding the push handles but your better off measuring the height of yours with a tape measure.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Suncast Corp, Batavia, IL
Read all my Q&A
November 5, 2014
Answer: 
The Suncast Glidetop storage shed, Fred, has the following dimensions that may help you to determine if you would need to fold the handle on the lawnmower or not.
The minimum door height is 46.25 inches with the minimum door width being 46.5 inches. The interior depth is 5 feet 11.625 inches with an interior width of 4 feet 2.25 inches. The interior height to the underside of the steel roof support is 44
Read More
The Suncast Glidetop storage shed, Fred, has the following dimensions that may help you to determine if you would need to fold the handle on the lawnmower or not.
The minimum door height is 46.25 inches with the minimum door width being 46.5 inches. The interior depth is 5 feet 11.625 inches with an interior width of 4 feet 2.25 inches. The interior height to the underside of the steel roof support is 44 inches, and the interior wall height itself is 45.5 inches.
I hope this information helps you. Thank you for your question, Fred, and your interest in Suncast products.
Read Less
+12points
12out of 12found this answer helpful.
Was this helpful?helpful12unhelpful0

Asked by
Mount Lebanon, PA, USA
Read all my Q&A
November 4, 2014
Answer: 
It will hold a full sized lawnmower a swell a snow blower and a bicycle all together without folding.
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0

Asked by
Everett, WA
Read all my Q&A
November 4, 2014
Answer: 
Yes it would hold your lawnmower without changing the handle. There is plenty of clearance for the handle.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Newark
Read all my Q&A
November 4, 2014
Answer: 
Yes, But I would recommend putting the handle down.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
2 3 4 5 6 »
  • 2016-09-08 T12:34:40.091-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203065758, prod, sort_default
2 3 4 5 6 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 148ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.7 out of 5 by 307 reviewers.
Rated 5.0 out of 5.0 by Excellent customer service from Suncast I bought this shed about 4 years ago. A few of the screws holding the hinges in place snapped in half. I called Suncast customer service and was sent replacement hinges and screws free of charge. They arrived by UPS a few days after calling in the request. I had expected to pay for the replacement parts. Suncast really honours its ten year warranty. July 18, 2016
Rated 5.0 out of 5.0 by Excellent Product, Easy Assembly I picked this up after ordering online in Redlands, Ca. Customer service was excellent, and tied it off on a sedan and headed home. The assembly directions were clear and concise, and it went together in about 20 minutes. Everything works as described, well made, and an excellent transaction. Thank you ! August 26, 2016
Rated 5.0 out of 5.0 by Fits Perfect Shed went together quite easily, don't understand previous posts on difficulty, mine was a snap! Took about 17 minutes after all the parts were laid out. I would've liked the floor to be a little bit more solid, but then again, it's a plastic storage shed. Ample room for what I purchased it for, and the color closely matched my metal shed which it now sits next to. I think everything today is priced to high, that's why the average value rating, but in keeping with todays market, it was a good purchase. Doors and lid work as advertised and all seams line up and is easily secured with a standard padlock. July 19, 2016
Rated 4.0 out of 5.0 by Nice Shed, don't forget about the base We purchased this shed as an additional space for emergency storage in our back yard. It is possible just to level out the ground beneath the shed and install but it recommends a concrete pad or a wooden framework as a foundation. Plan for this additional cost in advance if you want to build it correctly. Setup took less than an hour and I'm very pleased with the results thus far. Note if shipping to store the box for this is HUGE. You'll need a pickup or strong roof rack and an extra hand. Thanks to HD for sending out a helper. June 21, 2016
Rated 5.0 out of 5.0 by Great Storage Shed This shed was super easy for two people to put together and it only took about an hour. I did not put it on a foundation since it has a built-in floor but the directions recommend it. It is the perfect size for squeezing in that 5 foot area between properties and the perfect height as to not be seen over the fence. Right now I'm storing all my ex-husbands stuff and later I'll put my kid's bicycle's in it which is what most people use it for. The shipping was $100 so that's why I gave it 4 stars for value but really it was the world's largest box so I have no idea how I would have gotten it home solo. The kids also enjoyed making the box into a playhouse. April 12, 2016
Rated 4.0 out of 5.0 by Nice shed, easy instructions, make sure your foundation is level I've purchased Suncast products before and have always found them durable and well made. This product is no different. I followed the instructions and found the assembly of the shed went very smooth until I got to the doors. I had difficulty getting the hinges installed on one side. After further research I realized my foundation was a 1/4 off on the side I was having trouble. after putting some shims under the shed and leveling everything the hinges went on as they should. That said, I do think this is one area where the shed make break in the future. I would have liked for the bolts that go into the hinge to be longer to further secure the doors. September 5, 2016
Rated 5.0 out of 5.0 by Highly recommend For whatever reason, you need a shed this size. I did, and got one. I bought this from HD, bc it was cheapest, and bc it was available at the store. Thanks to the reviewers who helped me to pull the trigger on this puppy. Taking it home. The cardboard box was 55"x59"x19", too big for my Odyssey, so I did what somebody else did... got a HD guy to help me lift the thing onto a dolly, took it outside, and cut it open and put the pieces into the mini-van. I had to remove the middle seats prior, and the individual pieces filled half the van. I doubt you can fit all the pieces into anything but a full-sized minivan or larger. It was cool that the box didn't have any styrofoam or other junk, so there wasn't a ton of trash to throw away. Assembly was easy. I am an engineer and I know easy instructions when I see it. There is absolutely no way you can mess it up unless you screw the screws in too tight, and ruin the threads. This is a one-person job provided you can lift about, I'd guess, 40 pounds...at no point do you need a second person to hold something while you screw something in, although you might if the wind was blowing hard. They did a great job engineering the assembly. Having done it once, I can now do it a second time with no instructions and it would take me 20 minutes. They even give you a couple extra screws just in case you dropped one down the drain. The base is critical. Do not buy this thing unless you first build the platform for it. The reason? The plastic material has no structural support so if it's sitting on a non-flat, shifting surface... goodbye! I am really impressed with how well the parts lined up perfectly, and judging from the other reviews, no-one complained about misalignment. However, I filled the shed up and one of the things I jammed into the back corner was my table saw which sits on a metal frame, and I put like 80 pounds of cement mix on top of one side of the table saw... and then pushed as hard as I could the table saw into the corner... guess what... the shed on that corner was no longer aligned bc I forced/pushed against it. And... the foot of the table saw (due to the weight of the cement mix on top) dug into the flooring of the shed, and almost cut through it. So therein lies the reason why you must have a stable surface for the shed... the plastic is not designed to hold up against a lot of pressure. AND, the VERY first time I jammed my lawn mower up the platform, the mower's frame caught a piece of the floor and ripped it (see pic if I can attach)!!! YOU NEED TO NOT THINK THIS THING IS DESIGNED FOR ABUSE... it's not!! Having said that, I think it can support itself for many years. I installed two removeable closet bars up, and this is perfect for hanging my weed-wacker. (see pictures if I can attach them). I used 3/16 toggle bolts to hang the frame for the cross bars. don't forget about the other costs you might incur: shed + tax $xxx tools for digging (edge cutter, flat spade): $60 tools for spreading cement (hoe or rake): $20 cement mix, steel mesh, and wood for forms: $90-100 cement mixer rental: $53 cement screws, washers, cement drill bit: $15 clothes hanger bars and assembly: $23 July 10, 2016
Rated 5.0 out of 5.0 by Great product for smaller yards The storage shed had easy to read instructions. It took two people and about an hour to assemble. It is a good quality product and I like the design. It holds quite a bit but its size isn't overwhelming for smaller yards. June 21, 2016
  • 2016-09-08 T13:20:42.356-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_307, tr_307
  • loc_en_US, sid_203065758, prod, sort_default
2 3 4 5  ... 11 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • REVIEWS, PRODUCT