0044365021140

Suncast

Model BMSA7S

Internet #204513670

Shelf for Suncast Shed Models BMS1250 and BMS2000

$15.99 /each
  • Provides additional storage for your vertical shed
  • Hardware included
  • Designed for easy install

Frequently Bought Together

Product Overview

Install up to four of these shelves in your Suncast vertical shed (models BMS2000 and BMS1250) to organize and maximize your storage space. Each bracketed shelf is fabricated precisely to fit the dimensions of your storage unit, comes with fastening hardware and is capable of supporting up to 30 lbs. of evenly distributed weight. Install separately-sold S-hooks and dangle them from the wire shelves for more storage options.

  • Dimensions: width: front - 27-3/4 in. middle - 25-3/4 in. back - 23-3/4 in., depth: 14-1/2 in., height: 1/2 in.
  • Easily fits into molded groove of your Suncast vertical shed for increased shelf support
  • Great for storing small handled tools and other garden accessories
  • Mounting hardware included
  • 30 lb. weight capacity, evenly distributed
  • Compatible only with Suncast vertical shed models BMS1250 and BMS2000
  • Width of shelf tapers from front to back

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

14 Questions22 Answers

Customer Questions & Answers

Shelf for Suncast Shed Models BMS1250 and BMS2000
Shelf for Suncast Shed Models BMS1250 and BMS2000

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Are the shelves sold in a 4 piece set or individually?

This question is from Shelf for Suncast Shed Models BMS1250 and BMS2000
Asked by
Read all my Q&A
November 28, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Irvine, CA
Read all my Q&A
July 19, 2016
Answer: 
Individually
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
December 8, 2015
Answer: 
came in two piece set.
+1point
4out of 7found this answer helpful.
Was this helpful?helpful4unhelpful3

December 2, 2015
Answer: 
Up to four of these Suncast wire shelves model BMSA7S can be installed inside the BMS1250 or BMS2000. However, they are sold through Home Depot as single pieces. Thank you for your question and your interest in Suncast products.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
 
2 answers

Shelf installation and weather proof quality

This question is from Shelf for Suncast Shed Models BMS1250 and BMS2000
August 25, 2016
Hello, I am trying to understand how the shelf is installed and secured without having screws go through the plastic and voiding the weather proof quality. How does the shelf unit is secured to the shed?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 31, 2016
Answer: 
The Suncast wire shelf model BMSA7S that is compatible only with the Suncast BMS1250 or BMS2000 is made of powder-coated steel with zinc plated fasteners. These two sheds will have specific locations along the sides and back where each shelf would rest.
Shelves must be completely seated into these shelf supports. Using the screws provided with the shelf kit, each shelf is secured when the screw
Read More
The Suncast wire shelf model BMSA7S that is compatible only with the Suncast BMS1250 or BMS2000 is made of powder-coated steel with zinc plated fasteners. These two sheds will have specific locations along the sides and back where each shelf would rest.
Shelves must be completely seated into these shelf supports. Using the screws provided with the shelf kit, each shelf is secured when the screw penetrates only through the inside layer of the double-walled, blow-molded shed. These less than inch long screws fitted through plastic clamps secured to the shelf sides and back will not penetrate completely through to the outside, keeping the shed rain free.
Thank you for your question, HandyWomanWannaBe, and your interest in Suncast storage products.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Irvine, CA
Read all my Q&A
August 25, 2016
Answer: 
The screws go in through thicker areas of the plastic and do not go all the way to the outside of the shed. There are actually small "pilot marks" that show where you are supposed to put the screws, and a ledge of sorts that the shelf rests on as well. So, there is no possibility of water getting into the shed unless you use longer screws and allow them to go all the way through the walls (and it would Read More
The screws go in through thicker areas of the plastic and do not go all the way to the outside of the shed. There are actually small "pilot marks" that show where you are supposed to put the screws, and a ledge of sorts that the shelf rests on as well. So, there is no possibility of water getting into the shed unless you use longer screws and allow them to go all the way through the walls (and it would have to be pretty long screws to do that). The shelf comes with the proper screws to use so there is no guesswork involved. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Can I make a hole in shelf for long-handled tools?

This question is from Shelf for Suncast Shed Models BMS1250 and BMS2000
Asked by
Alexandria, VA
Read all my Q&A
August 7, 2016
I want some shelf space, but also want to accommodate a few long-handled tools. Could I simply use wire cutters (or another tool) to cut out a few sections of front-to-back metal to fashion a hole that would allow long handles of tools to go through? I would leave the horizontal metal rods for stability. The frame of the shelf would remain fastened per directions. The hole also would help keep the tall tools standing upright and not falling over across the front of the unit.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 9, 2016
Answer: 
Actually, Carol, LuLu has the better idea in using the versatility of bungee cords.
We cannot support or encourage modifying any of our products. Not only would this void any warranty should the worst happen, but we couldn’t guarantee that the same weight limits per shelf would be valid.
Modifications change things, and sometimes not for the better. We do appreciate what you want to do and we thank
Read More
Actually, Carol, LuLu has the better idea in using the versatility of bungee cords.
We cannot support or encourage modifying any of our products. Not only would this void any warranty should the worst happen, but we couldn’t guarantee that the same weight limits per shelf would be valid.
Modifications change things, and sometimes not for the better. We do appreciate what you want to do and we thank you for thinking of Suncast for your storage needs, but we would encourage you not to change the wire shelf by removing wires or cutting holes in it.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Irvine, CA
Read all my Q&A
August 8, 2016
Answer: 
I just use a small bungee cord and fasten the tall/long handled tools to the front of the shelf. You could probably cut some of the sections, but I found it very easy to just stand up the tools and use the bungee. It also gives me more options for changing things around if I decide to.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

Does the shelf fit Suncast shed BMS1500?

This question is from Shelf for Suncast Shed Models BMS1250 and BMS2000
Asked by
ca
Read all my Q&A
May 3, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
June 6, 2016
Answer: 
I just called and ask them that today. No. There is no fabricated wire shelf for the model BMS1500. The 1500 is an older style that predates the 1250 and 2000. However, home depot is the only store that sells shells for the 1250 or 2000 and they no longer have them. Although they will say they are "currently out".
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

May 5, 2016
Answer: 
Yes, it will fit.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-19 T12:45:20.774-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204513670, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.4 out of 5 by 54 reviewers.
Rated 4.0 out of 5.0 by Shelves should come with the shed The "fair" rating on the value is because although it was a good price for the shed, I had to pay $15 extra per shelf (an additional $60). They should really come with it. September 6, 2016
Rated 5.0 out of 5.0 by Great purchase! This shelf is easy to install. I appreciate the quality. August 31, 2016
Rated 1.0 out of 5.0 by BAD PRODUCT WILL NEVER PURCHASE ANOTHER does not fit properly falls anytime products are placed on the shelf August 16, 2016
Rated 4.0 out of 5.0 by Nice product Very nice product and great resistance, looks strong and durable August 2, 2016
Rated 5.0 out of 5.0 by QUICK AND EASY ARRIVED QUICKLY, EASY TO ASSEMBLE. JUST NOT SURE WHY THIS SHELF WOULDN'T BE INCLUDED WITH THE STORAGE SHED. July 19, 2016
Rated 5.0 out of 5.0 by Great addition to the storage shed. The shelves are a great addition to the storage shed. It enables items to be stored in the cabinet instead of just rakes, etc. June 28, 2016
Rated 3.0 out of 5.0 by Good shelf, but be prepared to get your own mounting hardware We ordered 2 BMSA7S shelf kits and they arrived on time. However, on opening the individual shelf kit packages, neither contained the mounting hardware. I called Suncast Customer Support and they were very friendly and apologetic. They assured me the mounting hardware would be shipped out and arrive within 2 weeks. That was almost a month ago and still no hardware. I finally got tired of waiting and purchased the hardware and mounted the shelves myself. For that alone, I gave them 3 stars, they would have been 5 star otherwise. June 11, 2016
Rated 5.0 out of 5.0 by Shed shelvea These fit perfectly in the 2 c 4 x 6 foot resin shed I ordered them for and were easy to install. June 7, 2016
  • 2016-09-14 T11:26:55.993-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_54, tr_54
  • loc_en_US, sid_204513670, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 76ms
  • REVIEWS, PRODUCT