Rated 4.5 out of 5 by 20
Rated 5.0 out of 5.0 by ScottL Does the job
Easy to install, flexible. If you're using this type of roofing, this is a must for the top.
August 16, 2016
Rated 3.0 out of 5.0 by Aimee Not compatible with the Palruf "wave" corrugated roofing
I can't speak to the quality of the product as it was not the product that I had needed so I returned it.
I bought the corrugated 'wave' PVC panels from Home Depot but they didn't have the ridge caps at the store. I looked online and found these ridge caps, but because they are clear, I couldn't tell from the picture if the corrugations would match the panels I bought in the store. I called the home depot online support and gave them the bar code number for the panels I bought in the store and they told me that they 'thought' that the ridge caps would match the panels I bought in the store and if not, that I could return them to the store free of charge. The items arrived within about a week but they were the 'Greca' profile so the corrugations did not match the 'wave' that I already had. I returned them to the store for a full refund.
February 18, 2015
Rated 5.0 out of 5.0 by SalmonSlayer All around excellent product.
The perfect way to weather proof the ridge on my A-frame deck cover. Easy to put on and looks great. Installs over the top of the corrugated roof panels in minutes. You wont be disapointed.
July 30, 2013
Rated 3.0 out of 5.0 by jonsid Product works but it's tight
I used this and Suntuf panels to make a greenhouse roof. It is very flexible and covers the panels but you must make sure the panels go almost to the peak of the roof. The picture on the Suntuf website makes it appear the flashing is bigger than it is. I used only 1 purlin instead of 2 as shown on the website and it appears to be holding alright. Use the solid closure strips instead of the foam - foam is a beast to work with.
March 6, 2012
Rated 4.0 out of 5.0 by Murph Ridge Cap is Holding -- So Far
We have a SunCast resin sheds that we purchased about 7 years ago. One of the attractive features of the shed was the strip of clear plastic skylight that runs the ridge of the unit. Well, it just so happens that that material is different from the rest of the unit....and it seem that difference makes it crack and therefore leak. We used 3 of these ridge caps to solve the leaking problem. We used LockTite adhesive to glue the parts together and then used the same adhesive to glue it over the existing ridge cap. So far the inside of the shed is dry and the LockTite glue is holding things together. But I live in South Florida, so I guess we'll see how our fix holds up in stormy weather.
May 22, 2012
Rated 5.0 out of 5.0 by fyrcat Was easy to install.
Used this to cap a ridge on a chickens coop run. This product was easy to put on and secure using a power drill. It matched with the polycarbonate roofing panels perfectly. One piece of the ridge cap flashing covers two of the panels. My only complaint is that I had to order the pieces. I could not find it in any of the local Home Depots, and they took almost 2 weeks to arrive. I purchased the panels at my Local Home Depot, but the accessory pieces have to be ordered on line...
August 5, 2014
Rated 4.0 out of 5.0 by NewEnglander SunTuf Ridge Cap
In general I find SunTuf products to be very good and reasonably easy to work with. In the case of the Ridge Cap, I am mounting this onto a ridge with a 90 degree included angle. The angle of the product is much greater than that and tends to fight with you as you try to draw it into location. In my case, this resulted in a bit of waver down the length of the roofline. This could be improved.
October 14, 2014
Rated 5.0 out of 5.0 by macofalltrades good product
I needed to cover the roof on my small greenhouse.
After reserching roofing options I chose the Polycarbonate panels from Home Depot. I purchased 12' panels and cut them in half, I used a circular saw with a fine toothed blade turned backwards and cut all five panels at once it cut very easily.
I had to order the ridge cap online it fit the panels very well
I do think you should be able to purchase all accessories for the job at the local store instead of having to get part at store and the rest from the internet.
April 27, 2012