Model # TI-3-010

Internet #100123249

Store SO SKU #1000894441

Swan 30 in. x 60 in. x 59-5/8 in. 3-piece Easy Up Adhesive Tub Wall in White
0671037035473

Swan

30 in. x 60 in. x 59-5/8 in. 3-piece Easy Up Adhesive Tub Wall in White

$481.37 /each

Frequently Bought Together

Product Overview

Get the expensive look and feel of ceramic tile with no grout in this 3-piece tub wall unit. Made of Veritek, the color is molded throughout and ensures no surface coating to chip or scratch. Tub walls include a molded-in soap dish and overlapping corner/side panels for a water tight seal. Designed to fit tub areas 53 in. to 60 in. wide x 29 in. to 30 in. deep x 59-2/3 in. high.

  • Appearance of tile but has no grout to clean
  • Made of compression-molded veritek with no surface coating to chip, crack or scratch
  • Moisture-proof, sealed seams and edges
  • Adjustable to fit standard tub sizes

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions3 Answers

Customer Questions & Answers

30 in. x 60 in. x 59-5/8 in. 3-piece Easy Up Adhesive Tub Wall in White
30 in. x 60 in. x 59-5/8 in. 3-piece Easy Up Adhesive Tub Wall in White

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Can grab bars be installed through this surface without cracking it?

This question is from 30 in. x 60 in. x 59-5/8 in. 3-piece Easy Up Adhesive Tub Wall in White
Asked by
Richmond, California
Read all my Q&A
January 31, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 3, 2016
Answer: 
Yes, grab bars can be installed on the TI-3 wall kit. It is recommended that the grab bars be installed using a minimum 2" thickness "in-wall" solid wood backing material with #10 x 2" stainless steel, Phillips-head, sheet metal screws or using a wall embedded, minimum 12 ga. steel anchor plate with #10-24 stainless steel machine screws. The grab bar should not be mounted to drywall, sheetrock, plaster, Read More
Yes, grab bars can be installed on the TI-3 wall kit. It is recommended that the grab bars be installed using a minimum 2" thickness "in-wall" solid wood backing material with #10 x 2" stainless steel, Phillips-head, sheet metal screws or using a wall embedded, minimum 12 ga. steel anchor plate with #10-24 stainless steel machine screws. The grab bar should not be mounted to drywall, sheetrock, plaster, fiberglass, acrylic or "hollow" wall surfaces without appropriate wood or steel backing material. The recommended center-line height is 33" - 36" above the finished floors. Thank you for considering Swan products for your home! Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Can this unit be trimmed to fit around a window?

This question is from 30 in. x 60 in. x 59-5/8 in. 3-piece Easy Up Adhesive Tub Wall in White
Asked by
Read all my Q&A
December 11, 2015
I have a 12 x 20 window at head height and would like to have the surround go to the ceiling.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

December 14, 2015
Answer: 
Yes, you can cut the TI-3 back panel to accommodate a window. This can easily be accomplished using a saber saw with a fine tooth carbide blade. We do manufacture a window trim kit, SSWTK, that can be used with this unit. You can purchase the window trim kit via special order in your local Home Depot store using Part No. TK03610.018. Thank you for your interest in a Swan product for your bath remodel!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

over tiles???

This question is from 30 in. x 60 in. x 59-5/8 in. 3-piece Easy Up Adhesive Tub Wall in White
Asked by
Read all my Q&A
July 29, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 6, 2015
Answer: 
Yes, the TI-3 can be installed over existing tiles. Depending on the condition of the existing wall surface, additional silicone adhesive may be required to ensure contact between the substrate and the wall panel. Old ceramic tiles, if solidly adhered, do not need to be removed. All plastic tiles must be removed before installation. Any loose ceramic tiles must be removed or reattached. Old tiles and Read More
Yes, the TI-3 can be installed over existing tiles. Depending on the condition of the existing wall surface, additional silicone adhesive may be required to ensure contact between the substrate and the wall panel. Old ceramic tiles, if solidly adhered, do not need to be removed. All plastic tiles must be removed before installation. Any loose ceramic tiles must be removed or reattached. Old tiles and front edge ceramic tiles should be reset for appearance only. Any tile accessories must also be removed. Remove the bottom row of tile and cut a ventilation gap in the substrate. The surface must be dry, smooth and free of dust, soap scum or any other contaminates. If using a trim kit, old tiles may need to be removed to allow a proper fit. Thank you for considering a Swan product for your remodel. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-10-31 T01:29:36.370-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100123249, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.3 out of 5 by 3 reviewers.
Rated 4.0 out of 5.0 by Has held up fantastically! I had this installed 5 years ago, and I am still pleased. This requires virtually no maintenance, I clean it occasionally only out of a sense of duty, I believe I could go without ever cleaning it and it would be just fine. The shelves need wiping down sometimes but the walls seem to just repel dirt. I originally purchased it for looks alone, had I known then that the name Swan usually means lower quality, I probably would have chosen another brand, I am glad I didn't. July 9, 2015
Rated 1.0 out of 5.0 by Arrived damaged This surround arrived damaged. Was difficult to return, I had to take it back to the store 180 miles away. It had adhesive and calking considered hazardous material and could not be picked up even though it was shipped to me. I would not order another product with these materials included. Home Depot worked with me on the return and I was satisfied with their solution. September 6, 2011
Rated 5.0 out of 5.0 by Great Find I had a huge project in my bathroom in which I took it down to the studs. I found this shower and thought it would be another huge job to install. To my surprise, It is extremely easy to install and looks wonderful. The walls are beautiful and sturdy and we have not had any problems with it at all. I plan on installing another in my other bathroom. August 26, 2007
  • 2016-10-30 T23:56:44.718-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_100123249, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT