Rated 4.1 out of 5 by 8
Rated 3.0 out of 5.0 by Jeffrey could be better
This is definitely a universal bracket. Kinda disappointed with how cheesy the control arm brackets are unless you have a polaris. Also, it does not fit long wheel base atv's/2 up models. You will need an extension, which swisher wants $90 for. Don't waste your money on that, get a 36" piece of 2" square tube steel or 2" angle iron and 1 3/4x1.5" nut and bolt, drill 2 holes in it and your set. The nice part is the leaf spring in front supports the weight of the load. Just for reference I have it mounted on a 2010 arctic cat 700 trv.
September 6, 2016
Rated 5.0 out of 5.0 by Jose Great product
I am very happy with the product came on time is a very nice snow plow
October 18, 2016
Rated 4.0 out of 5.0 by woody good
this setup need a lot more instructions , open the box and there were nuts, bolts, brackets all over inside. once i sorted out the parts it was a lot less confussion. seem to work ok, bucket fits ,but i question how far out past front it should go.
October 4, 2016
Rated 5.0 out of 5.0 by mike swisher mount
Works as stated. Still unsure of overall stress caused on a arms time will tell. Machine does seem to hold weight much better then previous mounts used.
September 13, 2016
Rated 3.0 out of 5.0 by dvc1 Difficult to install but very effective when done.
This mount was very difficult to install on my 2005 Honda Rancher. I tried to use the recommended mounts as instructed but could not make them work that way. I had to use one of the alternative mounting brackets and adjust them slightly to get it to fit properly. However, once installed it is a very sturdy mount and I would give it an excellent rating after installation.
October 2, 2012
Rated 4.0 out of 5.0 by Tanker2 Need a few things
The Universal mount is essential to mounting any Swisher products to you ATV. The Mount does attach to an 800 X2 which is big with the wheel base of the Smart Car (LOL) so you most will not need the extension bar. Now the mounting took a while to align and the under carriage leaf spring should have an additional bracket (comes with one ) to hold it into place. I have heard some folk welding the leaf one it is in place but I haven't done that yet and have used the mount with moving lots of sand and mulch with out any problems (see Bucket reviewed post). I had to drill out the back tow hitch in order to get it mounted on my Polaris 800X2 which makes it difficult to put a tow hitch on it but welding or modifying the hitch will be need in the near future. Been very happy and leave this universal mount all the time for yard work. Don't leave it on while for wheeling. This works well the attachments as they have cotter pins to hold the attachments in place.
August 27, 2012
Rated 4.0 out of 5.0 by ARM82 Heavy duty
The universal mounting kit is very well built and much heavier than I expected. Most ATV owners will have to modify your CV boot protectors in order to get the brackets to fit on the lower a-arms and be able to put the protectors back on. It is definitley a 2 person job to mount the kit. Overall i think that its going to be a quality system.
December 27, 2011
Rated 5.0 out of 5.0 by ldales This is great for installing snow blade on 4-wheeler.
The product is just what a person needs to install a snow blade on a 4-wheeler. Easy to install and is really easy to put on and remove from 4-wheeler..
October 29, 2013