Model # 920924

Internet #100054132

Store SKU #920924

null T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)
0776391550003

T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)

  • T&G profile allows for fast and easy installation
  • Meets or exceeds PS2 standards
  • APA rated subfloor panel
$19.68 / each
If you buy 43 or more
$17.71 / each

Frequently Bought Together

Product Overview

OSB is a material with high mechanical properties that make it particularly suitable for load-bearing applications in construction. The most common uses are as sheathing in walls, flooring, and roof decking. Product may vary by store.

California residents: see   Proposition 65 information

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

47 Questions75 Answers

Customer Questions & Answers

T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)
T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

Can this be used on an outside deck?

This question is from T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)
Asked by
Read all my Q&A
November 3, 2015
Also can it be waterproofed? I wanted to use it instead of plywood.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Dayton, OH
Read all my Q&A
Home Improvement Profile: DIYer
August 10, 2016
Answer: 
I would imagine you could use this for decks IF you are using it for an underlay for another top product such as slate, tile, etc. However, I would take a step further and purchase a waterproofing product for the ground side as a protective barrier against moist grass growth, or what have you... but NOT as a stand alone product without super sealants
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Hutchinson, kansas
Read all my Q&A
Home Improvement Profile: DIYer
July 12, 2016
Answer: 
No
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
McKinney, TX
Read all my Q&A
Home Improvement Profile: Professional
March 16, 2016
Answer: 
No way, never. It will delaminate with exposure to moisture and turn into a pile of wood chips.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Great Falls, Montana
Read all my Q&A
Home Improvement Profile: DIYer
November 7, 2015
Answer: 
Hello Gremlin, Technically Yes you could. You would really need to make sure it has been sealed correctly & thoroughly. This kind of sheathing when it gets wet or moist swells up & over time will rot away. However if you waterproof it you should be good to go. I would be all in myself if it was a covered deck.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
4 answers

if the size is 47 3/4in will that match with 16in floor joist

This question is from T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)
Asked by
Read all my Q&A
April 1, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Sparta, TN
Read all my Q&A
April 14, 2016
Answer: 
you are going the wrong way!! you should be going at 90 degrees from joists
-2points
3out of 8found this answer helpful.
Was this helpful?helpful3unhelpful5

Asked by
McKinney, TX
Read all my Q&A
Home Improvement Profile: Professional
March 16, 2016
Answer: 
It should fit if the joists are accurately spaced. There is supposed to be a 1/4" surface gap at the T&G joint. Panels will meet at every third joist on 16" o.c..
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Great Falls, Montana
Read all my Q&A
Home Improvement Profile: Professional
August 6, 2015
Answer: 
Hello Handyman, from my reading up on this material I will say yes it will match up however it has been designed to be installed with 1/8 of an inch gap on all sides to allow for swelling. I personally have used this to build a shed & it worked out just fine so far. Hope this helped.
User submitted photo
User submitted photo
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

April 1, 2015
Answer: 
Yes, these sheets will align perfectly on a 16 inch joist spacing.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
3 answers

4 x 9 T1-11

This question is from T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)
Asked by
Read all my Q&A
June 1, 2016
Where can I purchase some 4 x 9 T1-11?

Pick Up In Store Unavailable, I can't seem to find any within 100 miles of my location.

4 x8 isn't long enough to cover a wood floor and foundation. The T1-11 needs to hang down below the wood floor panels.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
McKinney, TX
Read all my Q&A
Home Improvement Profile: Professional
June 21, 2016
Answer: 
In case you can't find the 9 foot sheets, use the 8 foot sheets starting from the bottom elevation where you want to cover the foundation, install z-flashing on the top edge, and cross-cut a piece for the remaining 1 foot +/- under the eave. This often has to be done on tall walls.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Hutchinson, kansas
Read all my Q&A
Home Improvement Profile: DIYer
June 2, 2016
Answer: 
you might need to go out of your area to the next town or so to get 4x9T1-11
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: DIYer
June 2, 2016
Answer: 
Hello Purchaser, Your best coarse of action would be go inside to your Pro Desk & have them order it up for you & have it delivered to your Home Depot Store for pickup. This would be your best bet. I know exactly what you are talking about. I included link to verify. I hope this Helped.
Link: Read More
Hello Purchaser, Your best coarse of action would be go inside to your Pro Desk & have them order it up for you & have it delivered to your Home Depot Store for pickup. This would be your best bet. I know exactly what you are talking about. I included link to verify. I hope this Helped.
Link: http://www.homedepot.com/p/5-8-in-x-4-ft-x-9-ft-T1-11-8-in-On-Center-Hi-Bor-Pressure-Treated-Plywood-95368/202087843 Read Less
User submitted photo
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Is it possible when bying a sheet of plywood from a home depot, to ask to get 2 cuts made at the store?

This question is from T&G Oriented Strand Board (Common: 23/32 in. x 4 ft. x 8 ft.; Actual: 0.703 in. x 47.75 in. x 95.75 in.)
Asked by
Tulsa
Read all my Q&A
May 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Hutchinson, kansas
Read all my Q&A
Home Improvement Profile: DIYer
July 12, 2016
Answer: 
Yes you can
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: DIYer
June 2, 2016
Answer: 
Hello BrotherJohns, Yes, just ask anyone of the Home Depot Associates in Lumber & they will make the cuts for you. I hope this Helped
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Boston, MA
Read all my Q&A
May 25, 2016
Answer: 
Yes. They did two cuts for me.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 »
  • 2016-10-31 T16:36:47.031-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100054132, prod, sort_default
2 3 4 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 196ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.5 out of 5 by 24 reviewers.
Rated 3.0 out of 5.0 by not 4' wide installed as instructed, and too many surface defects for nearly $30/sheet, you'd think it would be a better product or that you'd have choice of a better one. I needed to use this for the flooring (subfloor) in my shed. I don't intend to floor over it but looks like I'll have no choice. First, less than 50% of the sheets I pulled were free "enough" of surface defects to use. Second, the short edges are indeed 8' apart, but the measurement from the tip of the tongue to the groove edge is just 4'. That means if you put the tongue ANY bit inside the neighboring groove (as designed), it will fall short of 4'. Therefore, you will run short of your sheathing/flooring calculation. I had to scab my 20' building with about a 2" rip just to finish it off and that was with pretty generous 1/4" gaps on the T&G edges. Short edges (4') are typical. 8' edges aren't. Just be aware. Straight edge sand ply fits as you expect. May 16, 2016
Rated 5.0 out of 5.0 by easy to use for my shed floor. lined up easy, locked easy and is simple to use October 17, 2016
Rated 4.0 out of 5.0 by Decent decking if handled with care I used this decking for a shed floor. I found it noteworthy, yet not problematic, that this decking only has the tongue and groove on the 96" edges, so the 48" edges should be adequately supported and backed to provide fastening surfaces for adjoining sheets. Though I'm not an admirer of OSB products in general, these deck sheets were sturdy and had good dimensional tolerances for the price. The black parallel markings are rough guides only, and should not be relied upon as accurate indicators of 16" and 24" centers. Unfortunately, this product is very susceptible to handling abuse, and broken corners and edges easily result from incompetent forklift drivers at the store. This is by no means a product failure, but sadly, my decking arrived at my jobsite looking like it was trampled by angry elephants. March 16, 2016
Rated 2.0 out of 5.0 by Not .0703" I am replacing a particle board floor that is 0.655". Previously I used 5/8 OSB that is 0.630" which was close enough but I can't find it anywhere now. I thought .703 would be close enough but 0.730" is definitely too thick. Also, sheet had two grooves on the top face in one end. July 31, 2016
Rated 5.0 out of 5.0 by Barn floor I had a dirt floor in my barn, had to be converted to a shop. Framed up 2X4's, 12" on center for the floor base, leveled it with gravel and block, and put this T&G sheeting on top of it. Been down for 3 years now and not a single problem! Solid as a rock, takes all kinds of abuse and can hold a tremendous amount of weight without flex or bow. Extremely happy with it! For 16$ a sheet you seriously cannot go wrong! July 14, 2016
Rated 5.0 out of 5.0 by Outstanding Flooring for Anything! This stuff is amazing! It's sturdy & heavy with the bonus of waterproof adhesives when made, made it a perfect choice for my Shed. No problems with the tongue & groove... I just used a block of 2x4 & a small 4lb hammer to tap the panel to a tight fit. Decided to weather proof the floor with Henry 587 Dura-brite White Elastomeric roof coating... Just because I knew I wouldn't get the shed all done before it rained on me... It has held up very well over the past 4 months of construction. I liked the marking on the OSB made it easier to square up & install correctly! August 1, 2015
Rated 5.0 out of 5.0 by No Problems at All I did not experience any of the issues that several other reviewers listed. I did pick up the product in the store, so I was able to ensure each piece was in good condition. They snapped together with a slight tap from a hammer (actually the tap was on a 2x4 that was against the OSB). I placed 4 sheets into the attic above my garage, but had to rip each one in half to fit through my access door. I then screwed the OSB into each joist which created a really solid surface. This will also help prevent the drywall from having issues from the joists moving when walking on the OSB. Excellent Product. Cheers! May 12, 2016
Rated 4.0 out of 5.0 by Flooring OSB This OSB was exactly what I expected. It was good quality with little to no damage in handling. July 29, 2014
  • 2016-10-31 T00:55:07.281-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_24, tr_24
  • loc_en_US, sid_100054132, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 140ms
  • REVIEWS, PRODUCT