Model # 11247

Internet #100163075

Store SKU #367188

Tapcon 5/32 in. x 4-1/2 in. Carbide Drill Bit
0092097112476

Tapcon

5/32 in. x 4-1/2 in. Carbide Drill Bit

$3.93 /each

Frequently Bought Together

Product Overview

Manufactured with tighter tolerances than ANSI standards, carbide-tipped Tapcon Drill Bits are engineered to drill holes that deliver optimal performance when used with Tapcon Concrete Screw Anchors. Seamlessly use Tapcon Drill Bits with Tapcon anchors to ensure drilling precise holes and achieve maximum holding power.

  • Used for drilling pilot holes in masonry including concrete, block, and brick
  • Engineered to seamlessly work with Tapcon concrete screw anchors ensuring an accurate fit
  • Carbide tip increases strength and durability allowing for repeated use
  • Tight bit tolerance provides maximum anchor performance
  • Use with a hammer drill for best results
  • Use to install 3/16 in. Tapcon anchors
  • Also available in 3/16 in. Dia and 3-1/2 In. and 5-1/2 in. L

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Will this bit work with a standard drill

I want to attach a wall to a concrete floor (baseplate)
Asked by: irby
Yes, standard chuck
Answered by: SteveVA
Date published: 2016-12-09

Is the drill suppose to not be perfectly straight?

I bought this bit and put it into my drill and noticed the bit not being straight when it's spinning. I tried other bit that I have and it spins straight without any wobble. So my drill machine is okay. Or does this bit require some intermediary part before I insert it into my drill? I bought the Tapcon screws too.
Asked by: Allen
The Tapcon drill bit should be straight. It does not require an intermediary part before inserting it in a drill. If the Tapcon drill bit you purchased is not straight, we recommend returning it to the store where it was purchased. For additional information, please contact our Customer Service Department at 877-489-2726 from 8:00am - 5:00pm CT Monday-Friday.
Answered by: Paslode
Date published: 2015-09-20
  • y_2017, m_4, d_24, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_100163075, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • QUESTIONS, PRODUCT

Customer Reviews

5/32 in. x 4-1/2 in. Carbide Drill Bit is rated 2.8 out of 5 by 4.
Rated 5 out of 5 by from I have used this bit on brick and cinder block with no issues. Ive drilled over 50 holes with jus... I have used this bit on brick and cinder block with no issues. Ive drilled over 50 holes with just one bit and the only time I burned one out was when I accidentally put the hammer drill on reverse.
Date published: 2016-12-09
Rated 4 out of 5 by from Holy cow! Drill holes in your house! If you can keep a sense of humor during a bad hurricane season, you win. Drill holes in your house, put up pieces of wood, block out the sun, whatever you please. The perfect tool. It isn't like there is a great deal of choices in concrete drill bits and this does the job.
Date published: 2009-09-29
Rated 1 out of 5 by from OK for new pour crete, Old slab however.. It would't go further than 1/4" Drilled quite easily through a newly cured crete (5,000 psi) I poured around a new p-trap for a shower remodel. Drilled a total of 4 holes in the new crete, it did struggle at times then it would bite and go down quickly (hitting aggregrate?). But it wouldn't go deeper than 1/4" in the old slab!! I switched over to a hammer drill and maybe got down to 1/2" in one hole before the bit overheated and lost its temper.
Date published: 2015-12-08
Rated 1 out of 5 by from Not strong enough I am finishing my basement in my new house. The drill bit could not handle going into the cement, It ended up bending with all the pressure I was putting on it. The bit came with the cement anchors I purchased. Changed to a different drill bit and had no issues other then the bit was not long enough. Will have to get a longer one on my next stop to H.D.
Date published: 2016-01-22
  • y_2017, m_4, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_100163075, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 90ms
  • REVIEWS, PRODUCT