Free Shipping and BOPIS


Model # 115661

Internet # 204844076

Store SKU # 734821

#8 1-5/8 in. Star Flat-Head Wood Deck Screws (1 lb.-Pack)

This item has been discontinued.
The Home Depot no longer carries this specific product.
Please select another option below.

$9.37 /each




Model # 115661

Internet # 204844076

Store SKU # 734821

DeckMATE Wood Screws are ideal for outdoor wood deck projects. Star drive head provides better torque transfer and will not strip or cam-out. T-25 star drive bit included.

  • Reinforced neck prevents head from snapping
  • Specifically designed to drive fast and reduce splitting
  • Coating is guaranteed for the life of the project
  • Star drive will not strip or cam-out


Assembled Depth (in.) 
0.32 in 
Assembled Height (in.) 
1.63 in 
Assembled Width (in.) 
0.32 in 
Screw Length 
1-5/8 in 
Drive Style 
Driver bit included 
Fastener Callout Size 
#8 x 1-5/8 in. 
Fastener Plating 
Fastener Thread Type 
Fastener Type 
Wood Deck Screw 
Fastener/Connector Material 
Tan ceramic 
Finish Family 
Head Style 
Measurement Standard 
Package Quantity 
Primary Use 
Deck screws 
Product Weight (lb.) 
1 lb 
Self drilling 
Self tapping 
Tamper Resistant 
Warranty / Certifications
Manufacturer Warranty 
Limited Lifetime Warranty Against Rust and Corrosion 


Rated 3.0 out of 5 by 4 reviewers.
Rated 5.0 out of 5.0 by Works well for any project These bite right in and hold very well. Comes with a new Torx bit as a bonus too! August 10, 2015
Rated 5.0 out of 5.0 by Excellent finish, easy to use I've gone through roughly a half-dozen 5 lb. boxes of these in the past couple of years for deck, fence, and outdoor shed projects and the T-25 heads are an outstanding improvement over a standard Phillips head. A quality torx bit in a hammer drill or impact driver makes driving them a snap. Can be used directly in light materials but I predrill and lightly countersink holes in heavy material for a quality finish. I've never had a head separate. The occasional screw will have excess finish in the head requiring removal for the bit to get a proper grip since the heads may strip if the bit is improperly engaged with an impact driver. The finish appears to be holding up well on my older projects after several years of harsh interior Alaskan winters. June 13, 2014
Rated 1.0 out of 5.0 by Horrible, generally low quality These screws are much worse than the comparable Grip-Rtie screws at the other big home improvement store. The heads stripped very easily, and I have a bunch of useless screws because of this. Once I got the screws almost flush with the material, when I went to give them a quarter turn to bring them slightly under the material's surface the star in the head would just strip right out. They were also comparatively hard to start; thy would just spin on the surface of the material. Overall, these were frustrating to use, and I would not recommend them. April 26, 2014
Rated 1.0 out of 5.0 by Poor Quality The previous Pozi drive (Phillips and square drive combination drive) screws were great. Strong and well made. I never broke off a head as. These new Star drive screws are poor quality the heads break off and are much thinner than the Pozi drive screws. Unfortunately the great Pozi drive are no longer being made. These poor quality screws are the same price. Too bad, quality is again overcome by greed! June 1, 2014
  • 2015-10-02T14:16:31.619-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_4, tr_4
  • loc_en_US, sid_204844076, prod, sort_default
1-4 of 4