Designed to couple together two lengths of wire rope, or to form an eye or loop on wire rope. Wire rope should be the same diameter as rope clip. Consists of a U-shaped bolt, a forged saddle and two nuts. The two layers of wire rope are placed in the U-bolt and clamped into place for a tight connection.
- To assemble, insert both ends of wire into clip saddle and tighten nuts until secure
- For a safe connection, be sure to use the right number of clips; number of clips to use: 1/16 in. to 3/8 in. rope - 3 clips, 1/2 in. to 5/8 in. rope - 4 clips, 3/4 in. rope - 5 clips
- Zinc plated
- Do not use to hang loads, lift loads, support weight of persons or objects, and do not use on athletic or playground equipment