Model # J-S-100

Internet #100022783

Store SKU #526650

Store SO SKU #100415

Tiger Brand Super S Series 8 ft. 4 in. Jack Post
0838956000009

Tiger Brand

Super S Series 8 ft. 4 in. Jack Post

  • Adjusts easily from 4 ft. 8 in. to 8 ft. 4 in.
  • Ideal for sagging floors, basement beams or a secondary support
  • Compression load range of 18000 lbs to 9100 lbs
$49.97 /each

Frequently Bought Together

Product Overview

The Tiger Brand Jack Post Super "S" 8 ft. 4 in. Jack Post can adjust from 4 ft. 8 in. to 8 ft. 4 in. It has a compression load range of 18,000 lbs. at its lowest setting and 9,100 lbs. at its highest setting. It is ideal for correcting sagging floors and basement beams and providing secondary support for room additions, remodeling projects, porches and decks.

  • Strong galvanized plates
  • 4 ft. 8 in. - 8 ft. 4 in. adjustment range
  • Corrects sagging floors, supports basement beams, takes weight off large furniture or appliances
  • Compression load range - 18,000 lbs. - 9,100 lbs.
  • Double carriage bolts and nuts
  • Flush adjusting steel nut with self-centering pilot into the tube
  • Positive locating holes
  • Adjusts easily with a 3/4 in. open-end or adjustable wrench
  • Parts are separate, ready to be assembled

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

16 Questions23 Answers

Customer Questions & Answers

Super S Series 8 ft. 4 in. Jack Post
Super S Series 8 ft. 4 in. Jack Post

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Are replacement parts available for this product?

This question is from Super S Series 8 ft. 4 in. Jack Post
Asked by
Read all my Q&A
July 2, 2016
We seemed to have lost the steel plates for the Jack post. I'd hate to hae to buy a whole new jack, but I can't find anywhere online that sells replacement parts. Thought I'd try asking here.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Plymouth Meeting, PA
Read all my Q&A
Home Improvement Profile: DIYer
August 27, 2016
Answer: 
Yes. Spare parts are available from Tapco companies. 330-576-1750 ext 118
or can send email to admin@tigerbrandjackpost.com
I purchased parts in August of 2016. Reasonably priced.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Pahrump, NV
Read all my Q&A
August 11, 2016
Answer: 
No. And there isn't any customer support from manufacturer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Phoenix, AZ, USA
Read all my Q&A
Home Improvement Profile: DIYer
July 3, 2016
Answer: 
Not that I am aware of.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

After installing the jack, what is the adjustment length with the 3/4 inch wrench.

This question is from Super S Series 8 ft. 4 in. Jack Post
Asked by
Burnsville, NC
Read all my Q&A
August 17, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Charlotte, NC
Read all my Q&A
Home Improvement Profile: Professional
June 9, 2016
Answer: 
From watching the videos I gather that you have a bit over 3", maybe 4" (unless they are extra nice and give extra), as you have 3" adjustments via the 2 bolts holding the poles together you are covered for any length this way (the two poles line up naturally at every 6", but all you do is twist one pipe 90 degrees to line the holes up at 3"). I took this from their install videos and my experience, I Read More
From watching the videos I gather that you have a bit over 3", maybe 4" (unless they are extra nice and give extra), as you have 3" adjustments via the 2 bolts holding the poles together you are covered for any length this way (the two poles line up naturally at every 6", but all you do is twist one pipe 90 degrees to line the holes up at 3"). I took this from their install videos and my experience, I can't promise this to be THE answer, but I'd bet on it Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Scottsdale, AZ
Read all my Q&A
Home Improvement Profile: Professional
September 1, 2015
Answer: 
The Jack Post assembly is a pipe within a pipe with 6" adjustments via drilled holes and thru bolts. The pipes can be extended from 4' to 8' by use of the pipe adjustment holes. Final height adjustment is by a threaded rod and base plate at the top of the pipe assembly. This threaded rod has approximately 4" of adjustment.
+8points
8out of 8found this answer helpful.
Was this helpful?helpful8unhelpful0

Asked by
California
Read all my Q&A
August 18, 2015
Answer: 
About 4". You have to brace the load, remove the jack and move it up to the next pair of holes about every 3"
+8points
8out of 8found this answer helpful.
Was this helpful?helpful8unhelpful0
 
3 answers

What is the service load for this support at max extension?

This question is from Super S Series 8 ft. 4 in. Jack Post
Asked by
Read all my Q&A
July 25, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Arvada, CO
Read all my Q&A
Home Improvement Profile: DIYer
October 2, 2016
Answer: 
Max load is 9,100 pounds fully extended and 18,000 pounds collapsed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Scottsdale, AZ
Read all my Q&A
Home Improvement Profile: Professional
September 1, 2015
Answer: 
The manufacturer states a 9,100 pound capability at maximum extension. Personally I would not recommend attempting to support that much weight.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

July 26, 2015
Answer: 
The maximum load at maximum extension is 9400.0 lbs.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
2 answers

Can this be used as permanent support and wrapped with coloum wraps for decor

This question is from Super S Series 8 ft. 4 in. Jack Post
Asked by
Read all my Q&A
March 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Southern California
Read all my Q&A
Home Improvement Profile: DIYer
April 22, 2016
Answer: 
This is not appropriate to use as a permanent support because it has loose pieces that are not attached to each other well enough to keep things from shifting over time and settling/use. If you need a permanent support, you can easily use this nearby as you install one.
+2points
3out of 4found this answer helpful.
Was this helpful?helpful3unhelpful1

Asked by
Read all my Q&A
April 2, 2016
Answer: 
Absolutely - used heavy duty liquid nails and apply to back of decor and a bit on pole- form your decor louvered wrap and blue tape to hold overnight- remove tape next day and stain/ sealer to your delight:-)
0points
3out of 6found this answer helpful.
Was this helpful?helpful3unhelpful3
2 »
  • 2016-10-31 T16:27:55.723-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100022783, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 48ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 135 reviewers.
Rated 4.0 out of 5.0 by Work Great! Assembly was very easy. I used two posts and a beam (two 2" x 8" x 12's sandwiched together) to stiffen the floor in my kitchen. I have a storage room under the kitchen so the posts aren't in the way. So far, so good...it has practically eliminated the bounce in the floor. I would recommend the product but lament that it is not made in the USA. October 18, 2016
Rated 4.0 out of 5.0 by Does what it's suppose to I bought two to hold up a add-on while I replaced the beam under the add-on section of the house. Seems to be a pretty good product only thing I don't like about it is the 2 plates the jack stands on. They are not secured at all. If not placed carefully could see it being a dangerous thing. Other than that, it seems to get job done October 4, 2016
Rated 3.0 out of 5.0 by Sloppy but effective Good overall product but he bolts holding it together could be more secure October 4, 2016
Rated 5.0 out of 5.0 by Just what I needed Bought this to temporarily hold up a section of deck that's sagging. Easy assembly (you can pretty much figure it out without instructions) and I was able to get it installed by myself. If you're bolting the plates to anything, you'll have to supply your own bolts as these are not included. October 2, 2016
Rated 5.0 out of 5.0 by Super S Series 8 ft. 4 in. Jack Post I needed to replace a rotted wooden post on a church. I used a jack on either side of the post and removed the post. It was almost a week before I was able to return and install a new post. The jack is easy to assemble and adjust. September 6, 2016
Rated 4.0 out of 5.0 by Good, just not great This jack was perfect for the job, very configurable and as a general contractor it is very versital for the many different thing that need support during my jobs. Only down side is that the screw jack and plates are not attached to the post, so when moving or loosening they can fall out/off. Otherwise it is a good product. August 30, 2016
Rated 1.0 out of 5.0 by Buyer Beware Purchase 2 recently for a project and had them delivered to my home. When I opened them, one was complete but the other was missing ALL hardware. Returned it to store and had sent. The package contained one post bolt, a 4" threaded rod and an industrial LED lighting igniter! Neither Home Depot nor Tiger Brand was willing to assist in a resolution to the problem. While the post works well if you have all the parts, quality control at Tiger Brand and customer support are non-existent. August 11, 2016
Rated 3.0 out of 5.0 by works, but kinda rickety I recommend this product with some reservations. Another reviewer commented that a bit of welding did wonders for usabillity, to which I would concur. However, this depends on your use - as I was using it for temporary bracing, and moving it around, the issues that made it awkward for me would not bother an install-it-and-leave-it use case. What made it less than ideal for my moveable-temporary-bracing case: All the parts just sit on top each other; no stampings are press-fit tolerance. This means that when you release it to move it, the top plate is loose (watch yer head) as is the actual threaded rod and the nut/cap it sits in. Bottom plate also loose. Note that the top plate cannot be welded to the threaded rod, or you'll lose your adjustment ability as you try to rotate the top plate. August 9, 2016
  • 2016-10-31 T16:46:52.199-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_135, tr_135
  • loc_en_US, sid_100022783, prod, sort_default
2 3 4 5 6 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 111ms
  • REVIEWS, PRODUCT