Free Shipping and BOPIS

Tile Redi

Model # 3460L-PVC

Internet # 100659160

34 in. x 60 in. Single Threshold Shower Base with Left Drain

This item has been discontinued.
The Home Depot no longer carries this specific product.
Please select another option below.

$599.00 /each




Model # 3460L-PVC

Internet # 100659160

Store SO SKU # 1000948730

Redi Base shower pans come in over 100 standard models with a variety of sizes and drain locations. Choose from single curb, double curb, triple curb, or barrier free entrance. All models offer the top-quality features you expect from Tile Ready brand shower pans. Tile Redi shower bases comply with all national and local plumbing codes and are UL listed.

California residents: see  Proposition 65 information

  • Single curb shower pan with left drain, 34 in. D x 60 in. W
  • 1-piece, pre-pitched shower pan with integrated curbs, splash walls, and 2 in. PVC drain
  • Ready-to-tile: tile set directly on shower pan surface
  • Fast- and easy-to-install
  • Leakproof
  • Includes Redi Poxy epoxy adhesive and round stainless drain plate

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Base Height (in.) 
Base Length (in.) 
Base Width (in.) 
Threshold Height (in.) 
Built-In Shower Seat 
Color Family 
Drain Included 
Drain Location 
Installation Hardware Included 
Product Weight (lb.) 
25 lb 
Shower Base Type 
Made for tile 
Warranty / Certifications
Certifications and Listings 
1-UL Listed 
Manufacturer Warranty 
This limited warranty is for a period of three (3) years in accordance with the terms of the Tile Redi Limited Warranty 


Rated 3.8 out of 5 by 8 reviewers.
Rated 4.0 out of 5.0 by Nice product, used similar before, would use again, TIME SAVER! This product saves time and it great quality. I used it in a walk-in shower, with a glass block wall. You should know that the curb also slopes (I did not know this), so adding a glass block wall was a challenge. You cannot install a glass block wall directly on the floor (not recommended by the manufacturer), so I had to add some mortar to the curb to level it where I installed glass block on about half of the length. Otherwise, this product is great, easy to install and high quality. I was nervous that because it is so light, it might snap or crack after I installed all the weight on top (ceramic tiles, glass blocks, grout), but it held up! My shower drains perfectly and no leaks. I expect my shower to be maintenance free for years. July 26, 2014
Rated 2.0 out of 5.0 by Tile Redi Shower Pan Review Overall, I was a bit disappointed with the quality of the Tile Redi shower pan. I expected it to be more durable, but the polyurethane is fairly flimsy. In short, it's light enough that if you were to drop a power tool on it, the tool could puncture it. The edges and corners can be easily damaged too if you're not careful with it. It was convenient the drain came installed in the pan, but it was not an easy task to connect it to the plumbing through our house foundation. The PVC drain coupling and foundation plumbing didn't quite line up (not Tile Redi's fault) but the PVC drain coupling didn't afford any flexibility. Tile Redi really needs a rubber gasket type connection to allow some flexibility during installation instead of a PVC glue fitting that only allows for about 30 seconds before the glue sets up. Overall, the pan is installed and looks fine but I haven't installed any of the tile yet. We have 2 more bathrooms in our house to renovate and I don't know if I'll order another one of these or not... December 10, 2014
Rated 4.0 out of 5.0 by plenty of room in the base This product really is a solid quality made base. The ease of installation of the mortar for setting purposes is a bit messy and tough to keep on when actually placing the base. Once placed properly though, makes for a very solid base. September 27, 2011
Rated 5.0 out of 5.0 by Great product First, this shower base is actually 34 X 60 (the model number states this). I was a little reluctant at first, but this is a great product. It is easy to install, easy to tile and looks great. Yes it is a little pricey but it saves enough installation time that it is well worth it. April 13, 2010
Rated 4.0 out of 5.0 by good solution overall, needs epoxy for tiling, could be less expensive Worked fine for me. My contractor used epoxy-based mixture for tiling as one reviewer suggested and it went smooth. I got "flexible" mosaic style tiles, partially because the bottom of the base is not flat (and because these are not so slippery when wet, which is important for the shower floor) Overall, it is a good practical solution. Can not imagine still why it is $600. Massive plastic, not so complicated shape, nothing more. Oh, well ... I guess it is better than making the shape from scratch with concrete or something like this. Would it be $300-$400, I would give full five stars without hesitation. For its current price of $600 - just my vote for four stars and Average grade for Value May 22, 2012
Rated 5.0 out of 5.0 by Good alternate if... you don't want to build your own pan or pour your floor. Yeah, it's $600, but you know its Tile Redi's fault if it leaks and it's not too bad to install. I would do it again. September 14, 2011
Rated 1.0 out of 5.0 by Why epoxy instead of thinset? Surprise! when you open the box you realize that thinset won't stick to it and you must use epoxy. C'mon TileRedi, come up w/ a product that takes thinset. Actually needed more epoxy than was included to finish the curb- cost me $100 and a trip to get it. July 25, 2011
Rated 5.0 out of 5.0 by the easiest way to have a tile floor in the shower April 30, 2011
  • 2015-11-30 T09:47:32.154-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_100659160, prod, sort_default
1-8 of 8