14 ft. x 3/4 in. x 7/16 in. 127T White Solid Extruded Plastic Base Shoe Moulding-127-TLF - The Home Depot
Discontinued

Model # 127-TLF

Internet # 203124127

Store SKU # 264520

14 ft. x 3/4 in. x 7/16 in. 127T White Solid Extruded Plastic Base Shoe Moulding


14 ft. x 3/4 in. x 7/16 in. 127T White Solid Extruded Plastic Base Shoe Moulding
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$0.58 / linear foot
Loading...

PRODUCT OVERVIEW

Model # 127-TLF

Internet # 203124127

Store SKU # 264520

Timbron mouldings are made from a unique composite material that simulates wood. Like wood, they have a hard exterior but a soft cellular interior. Timbron’s unique material allow its mouldings to be used in wet areas where wood does not hold up well.

  • Primary component in Timbron is 100% recycled Polystyrene
  • Timbron is pre-finished white, but readily accepts paint like wood
  • Timbron is moisture proof, mold proof and termite proof
  • Timbron is extremely durable
  • Sold by the foot
  • Note: Product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  0.5625 in  Assembled Height (in.)  3.625 in 
Assembled Width (in.)  168 in  Product Depth (in.)  0.438 
Product Height (in.)  168  Product Width (in.)  0.75 
Details
Color Family  White  Flexible  No 
Interior/Exterior  Interior  Kits  No 
Material  Composite  Moisture Resistant  Yes 
Moulding Use  Floor  Paintable/Stainable  No 
Pattern Number  127  Prefinished  Yes 
Pro Pack  No  Rot Resistant  Yes 
Termite Resistant  Yes 
Warranty / Certifications
Manufacturer Warranty  None 

CUSTOMER REVIEWS

Rated 2.1 out of 5 by 7 reviewers.
Rated 5 out of 5 by READ THIS REVIEW BEFORE THE OTHERS I've used this product before and had the problem with it cracking. Use common sense folks! You need to use a nail with a smaller head! I used a micro pin nailer which was awesome. The nail head is tiny which means you don't need to putty it since the paint will fill in the pin hole. If you're worried about the nails not holding just dab some glue behind it before you nail. Also, this stuff paints just fine. I use it because it's the cheapest thing at Home Depot. Lumber yards are always cheaper than HD but aren't always the closest place to get to. December 16, 2014
Rated 1 out of 5 by Complete garbage This stuff looks good in the store. It looks like it MIGHT take paint, and the idea of a waterproof base shoe is attractive in basement work where a flood might be an issue. BUT... It doesn't take paint without sanding (we tried one let it dry and it came off with just rubs an touches). It cracks horribly when being nailed in place. It won't adhere to glue. $30 worth of base shoe molding going in the garbage, about 3 hours of sanding, painting then attempting installation. TOTAL nasty garbage. Utterly unusable. December 14, 2014
Rated 1 out of 5 by Breaks when nailed I spent my evening cutting this stuff to fit my bathroom, only to find that it breaks when nailed. I'm sure Home Depot will give me my money back, but unfortunately I've lost too much time from my weekend. Do not purchase this. February 15, 2013
Rated 1 out of 5 by Shatters when nailed!!! Ditto to the other reviews. Shatters when nailed. Piece of junk and waste of time. Can't believe Home Depot sells this junk. May 29, 2013
Rated 1 out of 5 by This stuff is so brittle it can't be nailed If you are using this for moisture resistance fine, but be advised you will need to glue this or pre-drill every nail entry point. I purchased it to use in a kitchen and expected to attach it using my air brad nailer. Don't even try!! It splits , shatters, and breaks in two. If your lucky and place the brad just right you can get a few in, only to break the moulding with the next one. November 29, 2012
2 >>

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.