Model # 48044

Internet # 202639949

Store SKU # 851577

30 lb. Steel Ladder Hook

$6.97 /each



Model # 48044

Internet # 202639949

Store SKU # 851577

The Tornado 30 lb. Steel Ladder Hook supports up to 30 lbs. The hook projects 7-3/8 in. and is constructed of durable steel. Use it in drywall or wall studs (wall studs preferred). Weight limit is 15 lbs. in drywall and 30 lbs. in wall studs. The included anchors use self-drill technology in drywall. For studs, pre-drill a pilot hole first for the anchors. Do not over tighten. Use 2 hooks for extension ladders. Using extra hooks does not multiply weight limit.

California residents: see  Proposition 65 information

  • Not for ceilings
  • If installing into concrete or like substance, use appropriate hardware(not included) and use smaller holes on mounting plate
  • Comes with hardware
  • 7.6 in. height


Assembled Depth (in.) 
7.38 in 
Assembled Height (in.) 
7.6 in 
Assembled Width (in.) 
4.88 in 
Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Color Family 
Number of Holes/Slats 
Storage Product Type 
Wall Mounted Hooks 
Warranty / Certifications
Manufacturer Warranty 


Color Family: Orange
Material: Steel
Brand: Tornado
Price: $0 - $10
Review Rating: 4 & Up
Product Width (in.): 4.88
1 Question1 Answer

Customer Questions & Answers

30 lb. Steel Ladder Hook
30 lb. Steel Ladder Hook

Ask your questions. Share your answers.

Clear Search Term
This question is from 30 lb. Steel Ladder Hook
1 answer

How long is the hook itself?

This question is from 30 lb. Steel Ladder Hook
Asked by
Read all my Q&A
September 6, 2015
When it says depth, does that refer to the length of the hook, or from the tip of the black piece to where the hooks begins?
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 8, 2015
The depth is the length of the hook. It is 7 inches. Thank you for your inquiry.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-06-28 T15:30:50.762-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202639949, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms


Rated 4.6 out of 5 by 24 reviewers.
Rated 4.0 out of 5.0 by Great hooks These are great hooks for neatly organizing your garage (or other area). One suggestion for improvement: the screws for attaching should be longer so that they can grab more of the stud behind the sheet rock. . May 31, 2016
Rated 5.0 out of 5.0 by Holds my extension ladder well Used two of these to hold up my extension ladder under my raised deck. Works well. May 10, 2016
Rated 2.0 out of 5.0 by Returned product because protruding metal tang prevents mounting on hard surface I wanted to mount this on a metal surface but could not due to a metal projection (punch out) from the back of the bracket. This seems limited to mounting on drywall or soft pine. April 26, 2016
Rated 5.0 out of 5.0 by Works well for the design I have. Works well for the design I have. I have been buying these for some time. I do not expect to have to replace them, ever. May 10, 2016
Rated 5.0 out of 5.0 by great hooks for hanging anything bought these hooks to hang dive gear in our dive shed. works great April 12, 2016
Rated 5.0 out of 5.0 by good quality and price Used them to hang ladders in the garage. The ladders are heavy and one of these brackets holds them with no danger of the ladders falling off the wall. These ladders weigh 40 to 50 lb and have a 300 pound or more rating. I used two 3/4" X 3.5" boards screwed to the studs horizontally and mounted the brackets to the boards. April 26, 2016
Rated 4.0 out of 5.0 by did the job Used it to hang a 5 foot holiday wreath from the roof and it held up just fine. January 5, 2016
Rated 4.0 out of 5.0 by Screws should be a little longer Used a pair for mounting shovels/rakes/etc. the instructions say for into a stud predrill with 1/4" bit. I found this did not leave enough material for the screw to bite into well because it was so short and stubby, so the hook was slightly wobbly. There is a second set of holes for masonry mounting with Tapcons that I threw some drywall screws into to help shore it up. I didn't predrill on the second one I mounted and it gripped much better. December 8, 2015
  • 2016-06-28 T15:23:06.066-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_24, tr_24
  • loc_en_US, sid_202639949, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms