Rated 4.0 out of 5 by 31
Rated 1.0 out of 5.0 by Ellie Two versions of TotalPond LL1200 are very different
I have purchased two TotalPond LL1200 pumps, a year and a half apart, but they are very different in size and fittings. First was purchased from Home Depot, lasted about a year and died. Working on getting repair/replace under warranty. The first one came with fittings to allow different sizes of tubing on outlet, and specified that 1" ID tubing was suitable. The second pump (SAME MODEL #) is a good deal smaller, fits garden-hose size on outlet and no instructions for size of pipe to use. Unfortunately, the second one purchased from a different store does not work at all; dead as a door nail. Home Depot has a like to the product manual which pictures the first, larger pump. This is bewildering, and very disappointing because I replumbed my waterfall line to accommodate the LL1200 and the flow was ideal with the first one. I was entirely happy with the first one, but for the difficulty of taking it apart to clean and maintain according to mfg. instructions. The videos on this page show the different pumps: the "care and maintain" video shows the larger, first model. The "installation" video shows the smaller, later model!
August 30, 2016
Rated 4.0 out of 5.0 by Raven LIGHT DUTY SUBMERSIBLE PUMP
Great little pump for a water feature or waterfall. Has plenty of power to give about four and half feet of lift, says it will lift to five feet but it only trickles the water at that height. Comes with a screw on hose adapter for output. Whole unit sits in a leaf bag to keep the propeller free of debris in open water features. Standard 110 volt wiring that includes plug. Screw on adapter ideally fits various sizes of lift hoses. Make a beautiful water feature in any yard with this convenient little, easy to install pump.
April 14, 2016
Rated 1.0 out of 5.0 by Bob one year at best
Our fountain runs 24/7 and we useualy replace the pump after 6 to 9 months
July 12, 2016
Rated 5.0 out of 5.0 by ThisOldGarageNJ Heavy Duty Pump !!!
This is a solid heavy duty pump, comes with an adapter so you can fit several different size outlets.. Very easy to use, just plug and play, as you can see from the pictures I used pvc pipe to plumb the waterfall splitting it into a tee at the top so I would have a wider flow. I laid out the piping first then built up the rocks around it. The recks are secured with construction adhesive and mortar, This pump puts out a solid steady flow to create a beautiful waterfall. Any beginner could easily tackle this job. It also comes with a net bag that fits around the pump to catch debris and filter the pond water.Its a sturdy solid well made pump that seems like it will last a lot of years;;
August 3, 2015
Rated 5.0 out of 5.0 by Painters1953 Great for small pond
I have a cascading pond design - there is a top portion and a bottom portion and a sloping rocky link between them. I am using Model Ll1200 GPH pump to bring the water from the bottom portion to Model A16575, the 8" spillway, at the top section. I am using Model DD11330 at the bottom section to create a vortex in the lower section. The top section contains an aquatic planting area using Model A16549 for lights and aeration.
August 4, 2015
Rated 5.0 out of 5.0 by Camano An efficiency wonder
I replaced my old 1900 GPH pump that used 230 watts with this one to save on energy.
The LL1200 is rated to use 70 watts and I measured 73 watts with my wattmeter.
You'd think that the new 1200GPH pump would pump less than the old 1900GPH pump, but you'd be wrong. Total Pond generously rates their GPH with a 5' lift. My old pump was rated at 1'. At 5' lift, the LL1200 does 1242GPH, the old pump does 1250. So I get the same amount of flow for less than 1/3 the energy usage.
The information about fittings was confusing to me. The pump itself has a 1 1/4" Male Iron Pipe (MIP) fitting. A barbed adapter is provided that allows 1" or 1.5" inside diameter tubing to be pushed on.
I have an algae problem in my pond, so I really like the idea of the provided barrier bag. One thing to note is if you use the barrier bag you need to run the cord out next to the outlet. In my case the pump goes in with the fitting down, so I lost about a foot of the 16' cord length due to using the barrier bag.
I run the pump 10 hours a day, so it will save me about $70/year in electricity costs.
August 19, 2015
Rated 5.0 out of 5.0 by jakeparlay So Far So Good
We have been running this pump in a small outdoor pond with 3.5' waterfall continuously for several months now with no issues. Cleaning is easy, current draw is around 1 amp which is better than the unit it replaced. Flow is good, operation is quiet, and our fish are happy. The debris bag/filter, included, is a nice touch and we have found this unit to be nearly maintenance free.
April 25, 2016
Rated 5.0 out of 5.0 by rc So far, happy with the product.
The order arrived in a timely manner. Pump is,so far, working wonderfully. Fish are active and appear healthy. I appreciate the mesh bag that came with the order.
May 4, 2016