0803492200091

TruAire

Model H103M 10X06

Internet #202524892

Store SKU #321573

10 in. x 6 in. 3 Way Wall/Ceiling Register

$8.37 /each

Frequently Bought Together

Product Overview

The H103M 10 x 06 is a 10 in. x 6 in. 3 way air register used for wall or ceiling openings. The stamped face allows for three way air deflection. Our patented Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use.

  • Wall or ceiling register controls airflow into a room
  • Made of high quality steel
  • White powder coat finish
  • Dampers control the amount and direction of airflow

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions8 Answers

Customer Questions & Answers

10 in. x 6 in. 3 Way Wall/Ceiling Register
10 in. x 6 in. 3 Way Wall/Ceiling Register

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Can these be used on floor ducts

This question is from 10 in. x 6 in. 3 Way Wall/Ceiling Register
Asked by
Crystal River Fl
Read all my Q&A
May 19, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
August 26, 2016
Answer: 
I don't believe that this particular model would work very well as a floor register. The lever that controls the air flow sticks up and would be uncomfortable when stepped on, and most likely damaged. HD sells registers specifically designed for use on floors. I recommend selecting one of those. Good luck!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
TX
Read all my Q&A
July 18, 2016
Answer: 
Yes, I put the lever near the wall.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Oregon
Read all my Q&A
Home Improvement Profile: DIYer
June 28, 2016
Answer: 
I would not suggest it, as the lever that controls the damper sticks out from the vent and would be painful to step on.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

i have an old ceiling register that has a 5.5"w and 11.5"long opening. outside measurements are 7.25"by 13.25" long . What size register do i need to

This question is from 10 in. x 6 in. 3 Way Wall/Ceiling Register
Asked by
bearden, arkansas
Read all my Q&A
August 9, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Atlanta, GA
Read all my Q&A
Home Improvement Profile: DIYer
August 26, 2016
Answer: 
I have always used the measurements of the opening in the ceiling, wall or floor. Outside dimensions of the registers can vary and don't mean much. 12" X 6" is a fairly common opening for ceiling registers. I wonder if that might be the correct size? My experience is that most register boxes come in whole inch measurements. Sometimes they become distorted during instillation.
Disclaimer - I'm just a
Read More
I have always used the measurements of the opening in the ceiling, wall or floor. Outside dimensions of the registers can vary and don't mean much. 12" X 6" is a fairly common opening for ceiling registers. I wonder if that might be the correct size? My experience is that most register boxes come in whole inch measurements. Sometimes they become distorted during instillation.
Disclaimer - I'm just a DIYer not an HVAC professional.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Can i use filters inside this vents?

This question is from 10 in. x 6 in. 3 Way Wall/Ceiling Register
Asked by
Daytona Bch
Read all my Q&A
July 5, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Albany, GA
Read all my Q&A
Home Improvement Profile: Other
July 12, 2016
Answer: 
That is not what these were designed for and that would only reduce your airflow. If you keep your HVAC return air filter changed as needed you should not need to use a filter at the vent. If you still need to filter the air flowing into the room from your central air then it is time to have your duct work cleaned by a professional.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Will this one fit?

This question is from 10 in. x 6 in. 3 Way Wall/Ceiling Register
Asked by
Mobile, AL.
Read all my Q&A
June 30, 2016
My house was built in 1968, so it is old, but I don't care, it's paid for! However the outside measurements of two of my vents are 5¼" x 9½". Is it a good bet that these 6x10 vents will fit/mount the existing hole?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Mobile, AL.
Read all my Q&A
Home Improvement Profile: DIYer
July 3, 2016
Answer: 
Well, no one answered, so went and bought 3 of them. YES, they do fit, holes line up and everything. About a 10 minute job for each.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-27 T15:36:59.282-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202524892, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 44ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 42 reviewers.
Rated 4.0 out of 5.0 by A sturdy, well made Register. I bought this register to replace one that had been installed in a bathroom ceiling, and had become rusty and discolored. It seems to be well made, and installed easity. My only real problem with it is that it came with two installation screws that were hex headed, which I don't care for, rather than with rounded heads Fortunately, I had some round headed screws on hand. May 2, 2016
Rated 4.0 out of 5.0 by Good air duct cover a replacement for an old cover after we took down wallpaper and painted. We could not put back the old cover as everything else looked fresh and clean. August 16, 2016
Rated 4.0 out of 5.0 by A Good Alternative to the Original I needed to replace a damaged wall register in a bathroom I was remodeling. This 10" X 6" unit fit perfectly and looks very good. It's surprising what a difference this minor change made to the appearance of the room. August 26, 2016
Rated 5.0 out of 5.0 by Just the right size This ceiling register is just the right size. It was easy to install. July 19, 2016
Rated 5.0 out of 5.0 by Nicer features than standard register Not a lot to write about here. It's a wall HVAC register. It fit precisely into the existing slot. What I did like about this product was the three separate louvers, blowing air left, right and up. That provided better coverage to the room that traditional registers. June 29, 2016
Rated 5.0 out of 5.0 by Ceiling vent This vent was to replace an old vent. I was very pleased with the price and the quality of this product. May 24, 2016
Rated 5.0 out of 5.0 by Great Greaprice, Easy to in install. And look so much better. April 24, 2016
Rated 5.0 out of 5.0 by awesome product Wanted to replace vent in the house. Went with the truaire and it looks great and fits perfectly. March 16, 2016
  • 2016-08-26 T13:57:11.721-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_42, tr_42
  • loc_en_US, sid_202524892, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • REVIEWS, PRODUCT