0678330100006

TruWood

Model # 7POMSP

Internet # 202531838

Store SKU # 551786

4 ft. x 8 ft. Sturdy Panel Siding (Common: 7/16 in. x 48 in. x 96 in.; Actual: 0.400 in. x 48-13/16 in. x 96 in.)

Frequently Bought Together

Product Overview

TruWood 4' x 8' Sturdy Panel Siding is engineered to provide a high quality textured surface for the look of cedar without checks or cracks that can detract from the appearance of your project.

California residents: see  Proposition 65 information

  • Engineered Wood Panel - 7/16 in. x 48-13/16 in. x 96 in.
  • Pre-primed for weatherability
  • Delivers style and impact to all your outside buildings projects
  • Ideal for all remodeling and light commercial projects
  • Made in the USA
  • For installation video, warranty, care & maintenance see TruWoodSiding.com
  • Use matching reversible TruWood Trim to finish around windows, doors and corners
  • Green matters: FSC-certified Sturdy Panel is an EcoOptions Product. It also contains no UF resins.
  • http://www.collinsco.com/Library/TruWood/Installation_Instructions-TruWoodPanelSiding-Shiplap-SquareEdge.pdf

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.) 
48 
Product Length (in.) 
96 
Product Width (in.) 
48 
Thickness (In.) 
.4375 

Details

Color Family 
Beige 
Material 
Composite 
Paintable/Stainable 
Yes 
Profiles 
Panel 
Siding Features 
Textured Surface,Ready to Paint,Pre-Primed 
Siding Type 
Panel 
UV Protected 
No 
Vertical or Horizontal 
Vertical 

Warranty / Certifications

Manufacturer Warranty 
30 year prorated limited warranty 

More Products With These Features

Search

Customer Questions & Answers

14 Questions22 Answers

Customer Questions & Answers

4 ft. x 8 ft. Sturdy Panel Siding (Common: 7/16 in. x 48 in. x 96 in.; Actual: 0.400 in. x 48-13/16 in. x 96 in.)
4 ft. x 8 ft. Sturdy Panel Siding (Common: 7/16 in. x 48 in. x 96 in.; Actual: 0.400 in. x 48-13/16 in. x 96 in.)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Is this Particle board, OSB Board, or Plywood Paneling

This question is from 4 ft. x 8 ft. Sturdy Panel Siding (Common: 7/16 in. x 48 in. x 96 in.; Actual: 0.400 in. x 48-13/16 in. x 96 in.)
Asked by
Idaho
Read all my Q&A
June 26, 2016
I wish to use this over Studs on 8 x 12 Storage Building..
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
June 29, 2016
Answer: 
Thanks for asking! TruWood is an engineered wood product and our Sturdy Panel, sold through Home Depot, is ideal for storage buildings. If you have questions on installation, please refer to our installation instructions at http://www.collinsco.com/Library/TruWood/Installation_Instructions-TruWoodPanelSidingandSoffit.pdf. You can also speak with our install guru, Tom Scott, who can answer your Read More
Thanks for asking! TruWood is an engineered wood product and our Sturdy Panel, sold through Home Depot, is ideal for storage buildings. If you have questions on installation, please refer to our installation instructions at http://www.collinsco.com/Library/TruWood/Installation_Instructions-TruWoodPanelSidingandSoffit.pdf. You can also speak with our install guru, Tom Scott, who can answer your questions directly. Tom can be reached at 800-329-1219. Best building! Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: Professional
June 28, 2016
Answer: 
Hello WoodButcher, TruWood 4' x 8' Sturdy Panel Siding is an Engineered high quality panel with a textured surface for the look of cedar without checks or cracks. This would do Nicely for your Storage Building. Hope this Helped.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

June 28, 2016
Answer: 
This product is made of composite.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Is it required to install this panel over sheathing (rather than directly to studs)?

This question is from 4 ft. x 8 ft. Sturdy Panel Siding (Common: 7/16 in. x 48 in. x 96 in.; Actual: 0.400 in. x 48-13/16 in. x 96 in.)
Asked by
Mona Utah
Read all my Q&A
October 1, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Stockton, CA
Read all my Q&A
Home Improvement Profile: Professional
February 9, 2016
Answer: 
Shear walls and braced walls are two different things. This product cannot be used for either one. CA Building Codes requires a min. of 1/2" plywood over studs for braced walls, for shear walls only an engineer can ID the type of materials to be used.
The problem with this product is that it tends to significantly bow out if you are in an expansive soil area even if you install it over plywood. Just
Read More
Shear walls and braced walls are two different things. This product cannot be used for either one. CA Building Codes requires a min. of 1/2" plywood over studs for braced walls, for shear walls only an engineer can ID the type of materials to be used.
The problem with this product is that it tends to significantly bow out if you are in an expansive soil area even if you install it over plywood. Just check with the county/city to make sure you are in an stable area or you will end up ripping all the siding out.
Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
November 6, 2015
Answer: 
If you install this directly to the studs you will not meet building code shear requirements. Check your local building code requirements, since it is just a shed. If you have to have a shear rating on your project you will have to add a shear rated sheathing behind it, unless you use a shear rated siding panel. Hope this helps with your project
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Great Falls, Montana
Read all my Q&A
Home Improvement Profile: DIYer
October 8, 2015
Answer: 
Hello ShedBuilder! Great question... Yes you can install this directly to the stud in a Shed, however you will need to take into consideration the the Lap Edges of the Sturdy Panel... Good Luck on your Build! Hope this Helped. BTW I would use screws over nails when installing... Just my Preference!
I also did my review on these Panels below & I included a few pics too...
+5points
8out of 11found this answer helpful.
Was this helpful?helpful8unhelpful3
 
2 answers

Is this termite resistant, or do I have to treat it after I install it?

This question is from 4 ft. x 8 ft. Sturdy Panel Siding (Common: 7/16 in. x 48 in. x 96 in.; Actual: 0.400 in. x 48-13/16 in. x 96 in.)
Asked by
Phoenix, AZ
Read all my Q&A
June 22, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: Professional
June 24, 2016
Answer: 
Hello KHS, Yes, it is termite resistant. It is made & treated with EcoGuard Zink Borate. I hope this helped.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
June 24, 2016
Answer: 
TruWood now has EcoGuard which resists mildew, rot and termite damage. If we can be of further help please don't hesitate to call us at 800-417-3674.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Installing directly on to studs?

This question is from 4 ft. x 8 ft. Sturdy Panel Siding (Common: 7/16 in. x 48 in. x 96 in.; Actual: 0.400 in. x 48-13/16 in. x 96 in.)
Asked by
Ontario, california
Read all my Q&A
March 7, 2016
I'm doing a complete re panel on the exterior of a mobile home. Can I install this siding right on to the studs? The install video from the manufacturer says as long as it's at 16" between studs I can but people are saying I can't...which is it?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
March 9, 2016
Answer: 
Call us so that we can chat about best practices with you. 800-329-1219
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

March 8, 2016
Answer: 
This product can be installed directly into wood framing.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-07-25 T19:42:03.372-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202531838, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.5 out of 5 by 4 reviewers.
Rated 4.0 out of 5.0 by Just want I needed! I purchased this to use on the exterior walls of my doghouse and it worked flawlessly! It's quite heavy, but adds a lot of strength and durability to the dog house. I was able to use is horizontally like normal siding and reuse the cut pieces vertically without any issues. It was easy to paint and only needed one coat (but of course I gave it two). A few of the edges and corners were bashed and bent from the order picker putting it on the cart but other than that it's perfect. Just make sure to inspect the edges and grooves. March 2, 2016
Rated 5.0 out of 5.0 by Great Panel For a Shed or Outer Wall Sheathing Bought these to side a shed I built. Was east to cut & handle by oneself. This Stuff is Heavy Duty! The lap provided is a nice touch & made for easy installation over the 3/4 inch Styrofoam insulation board. It's Pre Primed so wasn't worried about weather till I was able to trim & paint the whole shed. I just wish they were a bit more affordable. September 1, 2015
Rated 4.0 out of 5.0 by Just what I was looking for. I put this siding on an older double wide. It was fairly easy to install with no help. I like the fact that it is primed. It was very easy to paint and looks very good. It made an old mobile home look like a house. Also it was very affortable. October 2, 2013
Rated 5.0 out of 5.0 by Good enough for the price I used this paneling for the roofing on a patio cover. I like the tongue and groove look without the high cost. May 9, 2012
  • 2016-07-24 T18:20:51.795-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_4, tr_4
  • loc_en_US, sid_202531838, prod, sort_default
1-4 of 4
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT