Rated 3.8 out of 5 by 22
Rated 3.0 out of 5.0 by Gamehog Issues
The exhaust pipe is not perpendicular to the stove, this means the pipe exits at an angle not 90 degrees. It;s aluminum, and it was close to the back shield, I had to use pliers to bend the sheet metal out of the was to make the pipe collar slide on the exhaust . The Ignition system does not work, you need to use lighter fluid to get it lit. After the initial dissatisfaction the stove does work and look nice.
The factory inspection prior to leaving the warehouse was a joke.
It weighs 300 lbs, taking it back $$ to get another is a joke.
Home Depot order # W407488962
October 6, 2015
Rated 1.0 out of 5.0 by Sapper not happy
I installed this 5 days ago and already the igniter won't work correctly. I have to shut it off, empty the pot and restart. Sometimes 3 or 4 times. I emailed and called for customer service and that didn't help much. One reply was, "It sometimes takes 15 minutes to fire." You should see how full it gets after 10 min on it lowest setting. It took me over 30 min to clean out about 2 lbs of pellets. Also, more pellets miss the pot than fall in during operation. Not happy!!!
January 13, 2016
Rated 3.0 out of 5.0 by Lycanna47 Ambivalant about quality
I started using pellet stoves in 1992, and I was impressed. Over time, fuel cost has risen a little, but very acceptable. I've had this stove for about 4 yrs or better. The self ignition went out after the first cold season, but, since my first stove didn't have that feature, it didn't bother me very much. 2nd season, I spent two weeks, building fires and waiting for blower to cut in, to no avail. 3rd week, it came around and I was finally warm. This year, as far as I can tell, the circuit board is out. It's either that or the plug, which I didn't know could be replaced. It's not a complicated contraption, but I'm feeling my way, cautiously. It would be nice to have a service person in the region, at least. This stove, and another, on the main floor of my log cabin, are my primary source of heat. Wish me luck.
January 3, 2016
Rated 4.0 out of 5.0 by nhgary King 5502M
I have owned many wood and this is the third pellet stove. My lid micro-switch wasn't making so intermittently it wouldn't start up (auger wasn't running). So stove would error out. This stove is simple, and seems to run well. Runs a long time with 120 lbs of pellets! Will do an update after my first winter season with it.
December 4, 2015
Rated 5.0 out of 5.0 by Ryan King 5510
I have been burning this stove for 7 years now, I am very pleased with it! I have replaced the igniter a few times but gave up on it. I have mastered how to manually light it and could not be happier.....7 years and still rolling out HEAT.
December 4, 2015
Rated 5.0 out of 5.0 by GBarrett 5500M
This is a great little stove. It packs a powerful heating punch. Just got it hooked up and burned my first two bags through it. We have a 2400 ft 2 house and it keeps it warm and toasty. Im looking forward to many years of use out of this stove.
November 21, 2015
Rated 1.0 out of 5.0 by jpgaud Ashley/King 5500M wood pellet stove
This stove is poor quality, cheaply made, with substandard parts and components. I've owned this stove since November 2010, and have experienced unceasing cascade of failures. The room fan failed less than 72 hours after installation. I've invested over $461.00 in parts including exhaust fan, exhaust temperature thermister, air pressure switch, and igniter. Now, the PCB igniter board has failed requiring $415.00, with shipping, to replace it.
This stove is a very poor long-term investment. As someone who has "been there", I strongly caution against purchasing any US Stove products. Read more reviews on Amazon to get a good picture of just how bad this stove really is.
December 3, 2013
Rated 4.0 out of 5.0 by NovaScotiaDoug So far so good!
I have had this pellet stove since November 2012 and have yet to experience any significant issues.
After the first winter I noticed the interior where the electronics are had some fine wood dust that must have made its way through the hopper. Problem was solved by sealing up the empty hopper cracks with stove tape.
I have read of ignitor failure in some reviews, and have had to restart the lighting process a couple of times, but it seems to work most of the time.
It looks great and pumps out a lot of heat. I find the best bang for your wood pellet buck is a heat setting between 1-3 (it goes to 5), above that I believe it consumes a ton more pellets for marginal heat output.
So far so good, it's made a significant dent in my electric bill as the house is baseboard/electric heated.
It IS harder to clean (ashes) than most I've seen. You need an ash-vac and must get in all the nooks/crannies vs. other pellet stoves that have an ash pan. On regular winter use, I clean it twice a week.
Hope this helps.
March 10, 2015