The product you chose is discontinued, but we found something similar you might like.
Firebrick Universal Fit (6-Pack)
  • US Stove
  • Model FBP6E
  • Internet #206137338
  • Store SO SKU #

Firebrick Universal Fit (6-Pack)

$2716 /each
Discontinued Model:

Model # FBP6

Internet #202516623

US Stove Fire Bricks (6-Pack)
0012685000602

Discontinued US Stove

Fire Bricks (6-Pack)

Frequently Bought Together

Product Overview

Keep your wood-burning stove with fire brick liners performing at optimum efficiency with these US Stove Fire Bricks. This six-pack of 4-1/2 in. x 9 in. x 1-1/4 in. replacement ceramic fire bricks can be used in any brand of wood or coal stove that uses this standard sized brick. Also ideal for outdoor pizza ovens and outdoor fire pits, these bricks are easy to use and deliver exceptional performance.

  • Universal design fist most wood and coal burning stoves
  • Easy to install and easy to use
  • Delivers reliable and exceptional performance and helps stove operate more efficiently
  • Also suitable for outdoor fire pits and outdoor pizza ovens
  • Genuine USSC parts

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

How much direct heat can these bricks take?

I'm trying to build an open brick BBQ oven.
Asked by: Frank
The firebricks are tested to withstand up to 2000 degrees F.
Answered by: USStoveExpert
Date published: 2015-09-20

Could these be put directly into an open fire to heat? Or would that be too hot for these?

Asked by: pbqueen
The Firebricks are capable of with standing up to 2000 degree F, so yes you can expose to an open fire or build a fire directly onto the bricks.
Answered by: USStoveExpert
Date published: 2015-09-20

I'm confused on the actual dimensions of these bricks.

The specification says the bricks are 7.5 x 8.25 x 4.5. That sounds thick compared to the picture. In the question & answer section, US Stove Expert (which has a USSC logo and seems to indicate they are the manufacturer) state 2 different dimensions or 9 x 4 x 1.25 and 9 x 4.5 x 1.25. I am building a stove and need the EXACT dimensions so the bricks will fit without cutting and without gaps.
Asked by: HWPCVILLE
The dimensions of the bricks are 4-1/2 x 9 inches.
Answered by: CommunityAnswer
Date published: 2016-12-03

How would I cut these brick to fit a special area?

Asked by: Nellie
I used a masonry blade on a table saw to make a progressive series of shallow cuts.
Answered by: 357Mag
Date published: 2015-09-20
  • y_2017, m_6, d_17, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_, sid_202516623, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 97ms
  • QUESTIONS, PRODUCT

Customer Reviews

Fire Bricks (6-Pack) is rated 4.3 out of 5 by 64.
Rated 4 out of 5 by from does the job of what it is designed to do these "bricks" are for insulating. That means they do not pass heat thru or in other words, store heat. They are to be used as a heat barrier. One review stated that they were used to lay pizza on inside a BBQ. for this purpose you are better off using a brick that retains heat, not insulates from it so that the bottom of the pizza dough gets nice and crusty. These bricks or fire clay bricks as they are called are available from most builders yards and are about a buck and a quarter each.
Date published: 2013-07-13
Rated 5 out of 5 by from Great insulation Used these to line the interior of a fire pit. It helped with the placement of the NeoCeram glass I used to keep the wind off the flame; great heat distribution to protect any flamable or heat sensitive parts and,... along with a zero clearance thermal barrier,.. protected the granite surround from heat shock. Easily cut on a compound miter saw with correct blade. Just remember to use water to spray the blade. Keeps heat and DUST down.!!!! Also, don't forget to wear a dust mask and goggles.....just in case.!.. Arrived in short order, nicely packed with no chips or cracks.! Would definitely recommend.!!!
Date published: 2013-06-22
Rated 2 out of 5 by from Four out of the twelve bricks had pieces broken off. Over a third of the bricks had broken pieces. Since I was cutting six of the twelve, i was ale to cut the broken chunks off. I would have returned the bricks if I did not have to cut them. I would advise muck better packaging in the future,
Date published: 2012-01-04
Rated 5 out of 5 by from Firebrick Liners Although the liners are a bit pricie, they are of good quality and are sguare and stright. A++ I worked at a ceramic plant years ago and I do know how they are made and some of the problems that take place as they are fired. The brick liners Home Depot did a great job choosing the supplier. Thanks
Date published: 2011-12-20
Rated 5 out of 5 by from What a savings!!!! The company that I bought my wood stove from recommended a site that carries firebricks in their size. GREAT.....but they were 3 times more than the exact same fire brick from Home Depot. A few corners were chipped when received, but perfectly good to use. Actually, a higher quality fire brick than the originals I found out after further research!!!!!
Date published: 2012-11-14
Rated 4 out of 5 by from They were a little heavy for fire brick The quality is good but They are very heavy for superior fire brick
Date published: 2011-12-20
Rated 5 out of 5 by from Convenience I'm glad Home Depot carries these bricks at such an affordable price. I ordered two boxes and got free shipping. This was easier then driving to the store and picking them up. Happy customer! :)
Date published: 2011-10-26
Rated 2 out of 5 by from Incorrect Specifications According to manufacturer, whom I contacted, each brick weighs 5 lb, NOT 1 lb, and the thickness is 1-1/4-in, NOT 1-1/2-in.
Date published: 2012-07-10
  • y_2017, m_6, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_64
  • loc_, sid_202516623, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • REVIEWS, PRODUCT