Rated 3.4 out of 5 by 16
Rated 5.0 out of 5.0 by booby took a little while to heat, but worked really well.
October 25, 2016
Rated 5.0 out of 5.0 by Pest Excellent Product
I am not sure why this product has received poor reviews. I heated mine on an MSR white gas camp stove with wind deflector. The product heated up very rapidly and poured and spread perfectly. Having tried Pli-Stix which was cumbersome, slow and spread poorly USEAL is quite a find.
August 20, 2016
Rated 1.0 out of 5.0 by mannytex Don't buy this unless you've got lots of tiime,,,and don't follow manufacturers directions
okay, i followed the directions and stuff takes forever to melt down, had 2 cans and only got down to half a can to use.
Takes forever to melt down,,,,,,,,,,,,if you enjoy taking forever to see this stuff melt down, go for it. .I'll never us it again. Manufacturer should have better instructions for it....it stated 3 minutes, ....yeah sure......
i'm sure if it's melted all the way down that it would effective and plenty to do the job, but that wasn't the case with me and I didn't want to NOT follow instructions and find myself in a dangerous situation.
good luck.........definitely use a torch afterwards to get a smooth finish.....that was the only good thing.
September 25, 2015
Rated 2.0 out of 5.0 by RG70 Product is ok, but ....
As one reviewer had mentioned, it takes at least 60 minutes to properly liquify this sealant (the directions say 30-35 minutes). Also, this will not fill as much as the box claims. Once it's liquified and ready to poor, you still need to constantly be stirring it. Due to evaporation and the product starting to dry and stick to the inside edges of the canister, you definitely lose sealant. Overall it's not a bad product as it seems to have filled some cracks adequately, but the preparation process/heating and wasted product at the end make it not worth it in my opinion. I'm heading back to the store tomorrow to buy some backer rod. .
August 24, 2013
Rated 2.0 out of 5.0 by Johnny Not so good
I've tried all the latex repair kits with poor results. The crack stix worked OK but a lot of work and thought this would be better. The reviews were mixed on this product but wanted to try. I got the double pack on-line. I work in a lab and am very familiar with working with difficult materials, and also had access to heat gloves and an electric hot plate. Even the it was very difficult. You need to get it REALLY hot for it to flow, and even then it has a limited working time until it sets up, then back on the hot plate.. It was a real mess. The mixing blade and putty knife also set up, so had to keep getting those warm so could clean them off also. Once poured it quickly set up so lots of puddles and streaks, and this was an 85F day! It still feels rubbery so hopefully will harden up more.
I am medium to advanced DIY, but next time would do the crack-stix or hire a pro (which is a pretty strong statement for me as I hate spending $!).
July 5, 2015
Rated 1.0 out of 5.0 by manny Garbage
While it seems like a great product in theory, it isn't. The first one I bought the plastic poorer was all cracked from shipping, because it is made of a really brittle and cheap hard plastic. It takes forever to heat up, and the stuff never really dried...which is apparently an ongoing issue they have because they give detailed directions of how to deal with this issue. You also can't pour the stuff into smaller cracks without making a big mess. Don't waste your time or money. Next I am trying the sticks that you heat with a torch. at least if they don't work good it won;t haunt me with a sticky mess forever.
August 24, 2013
Rated 4.0 out of 5.0 by Verified Reviewer seems to knitt very good to blacktop
just repaired some nasty cracks in my blacktop with this stuff. it seems like it knitted very good. should be a water tight seam.time will tell how it is going to hold up.i will finish this review in the spring after it goes through a northeast winter to see if it is still sticking to both sides of the cracks.be patient melting the stuff it does take some time to melt the 4 lb can but once melted poured in nicely with the spout supplied.use a camp stove and keep the mess outside!!
August 11, 2013
Rated 5.0 out of 5.0 by slimjimx1 FINALLY A PRODUCT THAT WORKS!!!!
My neighbor recommended this product and it works! In past i have used the cold pour method and i have also tried the kind of crack sealer you put in the crack and you heat it up with a plumber's torch. The torch kept on going out. It took way to much time and it did not last. When i used Useal my cracks were sealed. It's been two years and they are still sealed. I highly recommend this product.
January 26, 2014