11/16 in. x 4-9/16 in. x 82 in. Pine Primed Finger-Jointed Door Jamb Moulding-0203C-90082C2D3 at The Home Depot
Discontinued

Model # 0203C-90082C2D3

Internet # 202088420

Store SKU # 309038

11/16 in. x 4-9/16 in. x 82 in. Pine Primed Finger-Jointed Door Jamb Moulding


11/16 in. x 4-9/16 in. x 82 in. Pine Primed Finger-Jointed Door Jamb Moulding
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$8.60 / piece
Loading...

PRODUCT OVERVIEW

Model # 0203C-90082C2D3

Internet # 202088420

Store SKU # 309038

To ensure that the sheet rock is not visible and your casings and brick moulding has ample contact and support utilize this moulding to accentuate the door opening. Top and side members of a door or window frame. Different styles of jambs include a one-piece flat jamb with a stop applied, a single or double rabbeted jamb, or a two-piece adjustable split jamb.

California residents: seeProposition 65 information

  • A durable pine substrate that has workability similar to solid pine
  • Primed surface - Ready to paint
  • Coated with a high hide water based primer allowing for superior paint adherence
  • Used in finishing the sides and tops of doorways
  • Moulding installs in a snap using brad or finish nails
  • Manufacturers and availability may vary by store
  • Note: Product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Assembled Depth (in.)  0.656 in  Assembled Height (in.)  81.688 in 
Assembled Width (in.)  4.562 in  Color Family  White 
Finish  Primed  Flexible  No 
Interior/Exterior  Interior  Kits  No 
Manufacturer Warranty  Guaranteed against manufacturing defects. See store for details.  Material  Wood 
Moisture Resistant  No  Moulding Use  Door Parts 
Paintable/Stainable  Yes  Pattern Number  00203 
Prefinished  No  Pro Pack  No 
Product Depth (in.)  0.656  Product Height (in.)  4.562 
Product Width (in.)  82  Rot Resistant  No 
Solid/Finger Joint  Finger Joint 

CUSTOMER REVIEWS

Rated 3 out of 5 by 3 reviewers.
Rated 4 out of 5 by Good solution for DIY closet door I used to use standard lumber for door jambs in closets or bathrooms I have added. This time I went with these - they fit perfectly (2x4 studs and 1/2" wallboard on either side), were already primed, and the pre-cut joint made for a nicer finish. August 19, 2014
Rated 4 out of 5 by Not too shabby I wouldn't use these for hanging doors on but they are good for interior trim like bifold doors or entryways even if you have to shim them. I've used these for six entryways. May 1, 2013
Rated 1 out of 5 by Too Flimsy for Door Frames These boards are just too flimsy to build door frames out of. The pre-priming and dado cut is nice, but unless you mount this flush inside of a frame you'll have a hard time getting them to look straight. I built a frame for a bifold door in place, straigtening the pieces with shims took forever. A day later the exposed surfaces of the boards had cracked due to the stresses induced by the shimming! I'm going to have to replace it all. I will use 1 x hardwood next time, perhaps poplar. February 26, 2013
1-3 of 3

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.