MDF Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: 0.750 in. x 48 in. x 96 in.)-M11161249097000000A - The Home Depot
Discontinued

Model # M11161249097000000A

Internet # 202332600

Store SKU # 201566

MDF Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: 0.750 in. x 48 in. x 96 in.)


MDF Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: 0.750 in. x 48 in. x 96 in.)
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$29.98 / piece
Loading...

PRODUCT OVERVIEW

Model # M11161249097000000A

Internet # 202332600

Store SKU # 201566

Temple-Inland UltraStock MDF is valued for its defect-free composition and highly uniform density that allow it to cut, rout, shape and drill cleanly, holding intricate detail with a minimum of waste and tool wear.

California residents: seeProposition 65 information

  • Offers a smooth, consistent face that is completely defect free
  • High-quality, high-energy-refined fibers and consistent densities of Ultrastock select provide the ideal characteristics to cut and route cleanly
  • Smooth surface polished with a final 150 grit finish
  • Perfectly suited for paints, stains, veneers or laminates—all with excellent results
  • No assembly require

SPECIFICATIONS

Dimensions
Actual product thickness (in.)  .75  Actual product width (in.)  49 
Assembled Depth (in.)  .75 in  Assembled Height (in.)  97 in 
Assembled Width (in.)  49 in  Product Length (ft.)  97 
Product Length (in.)  49  Product Thickness (in.)  .75 in 
Product Width (ft.)  .75  Product Width (in.)  97 
Details
Ceiling use  No  Color Family  Brown 
Color/Finish  woodtone  Moisture Resistant  No 
Paintable/Stainable  Yes  Paneling/Planking Style  Traditional 
Paneling/Planking Type  Engineered Wood  Plywood Type  Particle Board/MDF 
Prefinished  No  Pressure Treated  No 
Primed  No  Product Weight (lb.)  90.5 lb 
Rot Resistant  No  Stainable/Paintable  Stainable & Paintable 
Tounge and Groove  No 
Warranty / Certifications
Manufacturer Warranty  na 

CUSTOMER REVIEWS

Rated 3 out of 5 by 5 reviewers.
Rated 5 out of 5 by Seems good to me... but read my review I am no wood worker or a professional by any means, so my ratings are based solely on what I used this wood for, which was a subwoofer box. It is perfect for that. As for cutting it, it cut very nicely with a jigsaw and table saw and I found it easy to work with. I've never touched MDF before, and I am glad I wore a breathing mask when cutting it. If you've never cut this before either, please protect your lungs! October 8, 2014
Rated 1 out of 5 by Poor quality ... not as advertised! Specifications section states this material is "Temple-Inland UltraStock MDF", but it's not. This is inferior product made by Del-Tin Fiber. Don't waste your money ... this has weak internal bonds that easily break and fall apart; not even close to the data sheet specs of the Temple-Inland UltraStock MD. September 6, 2014
Rated 4 out of 5 by basic building Great for basic painted shelving units with a custom look. December 10, 2014
Rated 4 out of 5 by Good stuff for the right project Due to unusual dimensions of my project (a bench topper for a corner dinette), I had to buy a whole sheet of this, then have it cut down. It's heavy, of course, but very manageable once cut into pieces, very flat, with very smooth faces, and edges that routed nicely (a simple round over, nothing fancy). The edges are very sharp when handling bigger sections, and one has to take extra care not to drop them, as they do tend to "smush." Other than that, this is a nice piece of material for simple indoor, painted items, with the proper edge prep. It does seem expensive for what it is, but it has a lot of potential uses for wood workers, including jigs, as it seems to machine well. It may be that the quality of the sheets here in CA is better than that in TX. It was a little cheaper by a few bucks than that listed in GA (no idea why it defaulted to Georgia in my search). January 13, 2014
Rated 1 out of 5 by Cuts poorly I picked up a sheet today to finish up a painted wainscott wall. Doing rail and stile with flat panels so the strips are run through the router table to get the proper profile. The MDF I was using from a local plywood supplier machines beautifully with no issues at all, no fuzzies and crisp corners. This stuff I picked up today leaves behind lots of fuzz and the 90* edge left by the routerbit is fuzzy and not crisp at all. It's not dull cutters as I ran another piece of the god MDF through and got the same perfect cut as it always does. This MDF is fine for shop use but not for anything else. Stick with the plywood suppliers if you need good stuff. That said for shop use this should be about a third cheaper than it is to make it a fair value. I will be hauling it back tomorrow for a refund. March 20, 2013
1-5 of 5

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.