0086698880377

Unbranded

Model NMW1

Internet #100038290

Store SKU #162618

5 ft. Non-Metallic Raceway Wire Channel, White

$8.12 /each
  • The leading Pro choice is now available for your DIY project
  • A discreet and easy way to extend power throughout your room
  • Highly rated by customers for its quality and ease of use

Frequently Bought Together

Product Overview

Legrand/Wiremold small surface non-metallic raceway system is the ideal choice for a homeowner that wants to extend circuits or communication cabling in their home. Surface non-metallic raceway allows you to add fixtures and outlets without disturbing the drywall, plaster or insulation in your home. The leading choice of professionals is now available for your DIY project.

  • For use with line or Low-Voltage products
  • Made of PVC
  • Easy to install
  • Paintable with latex base paint
  • Easily installed
  • Note: product may vary by store

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

9 Questions16 Answers

Customer Questions & Answers

5 ft. Non-Metallic Raceway Wire Channel, White
5 ft. Non-Metallic Raceway Wire Channel, White

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

How many wires?

This question is from 5 ft. Non-Metallic Raceway Wire Channel, White
Asked by
Tampa, FL
Read all my Q&A
October 19, 2015
I am looking to clean up the clutter of speaker wires along my floor, the speaker wire i am using currently is 12 awg and was wondering if this will hold 4 12 awg wires running through it?
I had recently purchased a smaller wire channel and it doesn't even fit 2 of the wires in it, so going to refund them and try this out, figured i would ask first.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Billings, MT
Read all my Q&A
Home Improvement Profile: DIYer
March 24, 2016
Answer: 
I bought this at another store and the label indicates 4 - #10, 5 - #12, or 6 - #14. I will be using it for 5 #12 solid wire
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
October 24, 2015
Answer: 
@HomeAnnie I went and bought them and it fits 3 16 awg wires side by side and I can fit 1 on top, although was kinda disappointed it did not have the double sided tape on them :(
Only down side is that I need to screw this onto my wall then again not sure sticky tape could have held the weight. Thanks for the help.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Long Island, NY, USA
Read all my Q&A
Home Improvement Profile: DIYer
October 21, 2015
Answer: 
I believe it would. Even thick speaker wire is not that thick. The channel is quite flat so they will lay next to one another, but I think it's wide enough for 4. If you are near a store, you can go see it there to evaluate yourself.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 20, 2015
Answer: 
This system will accept up to five (5) 12 awg wires
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
 
3 answers

How do i install thw wiremold

This question is from 5 ft. Non-Metallic Raceway Wire Channel, White
Asked by
TY
June 15, 2012
-3points
0out of 3found this question helpful.
Was this helpful?helpful0unhelpful3

Answers (3)

Asked by
St Thomas, USVI
Read all my Q&A
Home Improvement Profile: DIYer
June 25, 2015
Answer: 
It has an adhesive tape backing. You pull off the protective paper and stick it where you want it. Make sure you place the side that opens facing where you can open it to run the wire later and make each piece in the run face the same way. Then you should lift open the raceway and put a few screws through the back into the wall (into wall studs if a hollow wall) to ensure a permanent attachment. Three Read More
It has an adhesive tape backing. You pull off the protective paper and stick it where you want it. Make sure you place the side that opens facing where you can open it to run the wire later and make each piece in the run face the same way. Then you should lift open the raceway and put a few screws through the back into the wall (into wall studs if a hollow wall) to ensure a permanent attachment. Three screws should be enough. Read Less
+21points
21out of 21found this answer helpful.
Was this helpful?helpful21unhelpful0

October 2, 2012
Answer: 
Instructions can be found at the following link in the 'Resources' section. http://www.legrand.us/wiremold/at-home/on-wall-wiring/nonmetallic-raceway/nm-nonmetallic-raceway.aspx#res
-6points
4out of 14found this answer helpful.
Was this helpful?helpful4unhelpful10

June 23, 2012
Answer: 
Hello Valued Home Depot Customer,
Thanks for your question and interest in this item. You would have to contact your local Home Depot store to get more information on this item. To locate a store near you, please click on the “store locator” found at the top of each page. If you have any further questions, please contact our Online Customer Service Department at 800-430-3376 between 6:00 a.m. and 2:00
Read More
Hello Valued Home Depot Customer,
Thanks for your question and interest in this item. You would have to contact your local Home Depot store to get more information on this item. To locate a store near you, please click on the “store locator” found at the top of each page. If you have any further questions, please contact our Online Customer Service Department at 800-430-3376 between 6:00 a.m. and 2:00 a.m. Eastern Time daily.
Thanks.
Read Less
-21points
0out of 21found this answer helpful.
Was this helpful?helpful0unhelpful21
 
2 answers

Just installed a flat screen on the wall. I have tv wire and a cable wire. Can this product be used to conseal the wires

This question is from 5 ft. Non-Metallic Raceway Wire Channel, White
Asked by
Delaware
Read all my Q&A
May 28, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

May 29, 2016
Answer: 
This can be used to conceal wires.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Long Island, NY, USA
Read all my Q&A
Home Improvement Profile: DIYer
May 29, 2016
Answer: 
Absolutely!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Why don't they tell you the physical dimensions of the raceway product??

This question is from 5 ft. Non-Metallic Raceway Wire Channel, White
Asked by
Ballwin Missouri
Read all my Q&A
February 9, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
St Thomas, USVI
Read all my Q&A
Home Improvement Profile: DIYer
June 25, 2015
Answer: 
I believe they probably do in the specs. It's about 1 1/4" wide and about 3/8" deep and each strip is 5' long. These are outside dimensions. The plastic is about 1/16" thick.
+6points
7out of 8found this answer helpful.
Was this helpful?helpful7unhelpful1

February 9, 2015
Answer: 
The product dimensions are 1 5/16" x 7/16" x 60"
+10points
10out of 10found this answer helpful.
Was this helpful?helpful10unhelpful0
2 »
  • 2016-08-29 T14:47:31.662-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100038290, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 124ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 19 reviewers.
Rated 5.0 out of 5.0 by Easy to install and looks great I HAD a jumble of cables and cords for TV, cable, satellite, modem, phone, and computer. Was a mess! Product was easy to install and painted to match. Was economical too. I should have done this little clean up project years ago. February 27, 2016
Rated 1.0 out of 5.0 by No adhesive on backing to install This product does not have the adhesive strips for installation as described in the Q &A. It has instructions for screwing this into the wall and it does not have holes in it for that installation. I am so frustrated and unhappy with this product. I have previously bought a similar product and the adhesive strip was part of it. I am extremely disappointed with this product!! July 16, 2016
Rated 5.0 out of 5.0 by Good Product The wire mold was easy to install and blended in well with the room decor. It had enough room inside to run3 coaxial cables for remote TV hookups. The material used in the wire molding is non conductive and therefore adds a layer of additional safety. July 5, 2016
Rated 4.0 out of 5.0 by Nice low profile I had to replace some surface wiring in my concrete home in the tropics. This is excellent for high-moisture installations because it's not metal and won't rust out. There's a good selection of surface mount boxes to go with it at HD. I bought this in store and they had plenty in stock except I could not get white in every box type I needed. I will be painting the wiremold and boxes anyway, so color is not that important. This wiremold has a nice flat rectangular profile so is easy to run fairly discreetly. It installs quickly with adhesive backing and then a few concrete screws through the inside back wall. It is easy to run wiring through later with the snap opening side. It comes with several connectors of all types but because this is flat wiremold, the types of transitions you can make with the connectors are limited. I wish they would design more specialized connectors that you could buy as options that enable more complex transitions. The only other thing I don't like is that the connectors fit too loosely over the wiremold. I would definitely use this again. June 25, 2015
Rated 5.0 out of 5.0 by Good product This item worked out perfectly. No complaints. Wish it was slightly wider to allow more wires. January 19, 2016
Rated 5.0 out of 5.0 by Easy, Professional looking installation For easy, professional looking installation of wires and cords. Accepts wires up to about 1/4" in diameter x about 1/2" wide. White, lightly textured finish. Attach the base of the molding and snap on the cover for a finished appearance. Paintable. Cuts easily with standard woodworking tools/saw. Sand or shape the ends as needed to contour. November 20, 2012
Rated 5.0 out of 5.0 by Most Attractive Raceways on the wall are always unattractive. These are the most attractive unattractive raceways I've found. December 27, 2015
Rated 4.0 out of 5.0 by A/V cable cover Nice covers. The covers snap tight over the under-runners; there's enough space to run sufficient lines for your projector, speakers, etc. Paintable if need be. It would be nice if they came in longer pieces; 5 footers tend to be a little shorter than what you normally need. * Remember to buy enough corners (inside and outside style) to finish the job. I recommend buying more than you need and return the extras after the job is done. There is nothing worst than having to spend $100. in gas, time and productivity to buy a $5.00 part that you didn't have enough of... April 24, 2010
  • 2016-08-31 T13:28:35.177-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_19, tr_19
  • loc_en_US, sid_100038290, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 82ms
  • REVIEWS, PRODUCT