Rated 4.5 out of 5 by 24
Rated 5.0 out of 5.0 by r00k82 Great material to work with.
I used this as the back paneling for a wainscoting installation for a nursery project. The wood was easy to work with and was ready for a coat of primer/paint. The finished product looks amazing! I would definitely recommend to anyone needing a multi-use piece of underlayment.
January 20, 2014
Rated 5.0 out of 5.0 by Zimmzpub Very light weight and easy to cut
This product worked great, very light weight and easy to cut
January 28, 2014
Rated 2.0 out of 5.0 by bobbofly Ok value, maybe a bit pricey for what you get.
One thing to remember: this stuff is nowhere near so moisture resistant as it's made out to be. It's QUITE sensitive to moisture & especially mold/mildew, which eats out the glue & unravels the layers! BE CERTAIN TO HIT EVERY SHEET, BOTH SIDES WITH THOMPSONS OR OTHER SUITABLE SEALANT IF YOU PLAN ON STORING IT OUTDOORS AND/OR BUILDING A SHED OR OTHER OUTDOOR STRUCTURE WITH IT. Pre-treat regularly every few years with a quality sealant & it'll last a good long time. Fail & you'll have a large pile of plywood lasagne. Sheets are fairly attractive & would make excellent skins for cracked, weather-beaten, or punched in doors. Also for recovering tables cupboards, etc. as for recommending this product - yes, but in a very mediocre & lukewarm manner. Price needs to drop & quality needs improving.
August 14, 2015
Rated 5.0 out of 5.0 by Mike A splendid product with many uses
I use these for ceiling panels. My house, which I built myself, doubles as an art studio, and the ceilings run in three high parallel barrel vaults. The insulation lies on rigid foam, which lies on cross ties, and the barrel vaulting is shaped by using two by fours on top of, and perpendicular to, the crossties. It's simple, light in weight, and attractive, and I wanted the ceiling to be light and the panels to be easily removable for access to the insulation and the underside of the roof. The painted panels simply slide in,without nails or screws to hold them, above polyurethaned one by two furring strips that are screwed to polyurethaned crossties. The panels don't warp or sag and are strong enough to easily support half inch sound board. Each of these panels is flat. However, I know now that I could have designed the ceiling with long curves, as these panels are just flexible enough for that. In places the panels are stained with a golden teak stain and the effect is beautiful. As strong as the panels are, their weight is such that a quite large ceiling, whether curved or flat, is possible, and one person can do it all, even up high.
I also use this material in the kitchen, where they have a gloss polyurethane finish, and my large paintings are in cabinets that have these panels as a back. The surface of these panels, straight from Home Depot, is of such high quality that I easily get a tight seal whereever it's needed.
Use a fine toothed plywood blade and you'll get precision cuts. Finsih nails or small screws are perfect for holding where you need that.
I will continue to buy these and store them until the price goes up. .
August 11, 2015
Rated 5.0 out of 5.0 by Pharoade Used this material to install.
The wife and I installed this on our dining room and wash room ceiling, replacing ceiling tile that kept coming loose. Easy to install and looks absolutely great. Thinking about doing our bedroom walls with it.
December 11, 2014
Rated 5.0 out of 5.0 by jkau good product
It was relatively cheap and is smooth to touch and it was easy to handle while installing by myself in a garage
December 18, 2014
Rated 5.0 out of 5.0 by Carp Did a fine job.
The floor is very nice now. So much more cushioned with the wood underlayment. And the price was certainly reasonable.
January 8, 2015
Rated 2.0 out of 5.0 by Jace Cheap Plywood
For the price- it's exactly what you expect- very thin, very cheap plywood. I bought it to create a "kitty area" to easily clean. My cat slips on the surface, but I get splinters when I sit down. It took awhile for the smell of the plywood to dissipate and it does not lay flat- unless I put a heavy litter box on the plywood and other items on all the corners.
April 29, 2014