0039961000026

Model 400ARP25

Internet #100554467

Store SKU #147966

Universal Toilet Fill Valve

$7.48 /each
  • #1 best selling toilet fill valve in the world
  • Easy to install
  • Height adjusts 9 in. - 14 in.

Frequently Bought Together

Product Overview

The Fluidmaster 400A Toilet Tank Fill Valve is the number one selling fill valve in the world. The 400A is adjustable in height from 9 in. to 14 in. to fit almost all toilet tanks. It also has an anti-siphon design to prevent contamination of household drinking water.

  • Replaces ballcocks
  • Refills quickly
  • Universal fit for 1 and 2 piece toilets
  • Corrosion-resistant material
  • Anti-siphon operation, code approved
  • Won't contaminate fresh water supply

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

37 Questions185 Answers

Customer Questions & Answers

Universal Toilet Fill Valve
Universal Toilet Fill Valve

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Universal Toilet Fill Valve
 
12 answers

Did I ruin the fill valve by moving the lock ring?

This question is from Universal Toilet Fill Valve
Asked by
Karen
Seattle area
June 22, 2013
If I pushed up the lock ring and pulled the threaded shank completely out of the valve body but then reinstalled it and re-seated the lock ring, can I expect it to be OK or did I damage anything?
0points
1out of 2found this question helpful.
Was this helpful?helpful1unhelpful1

Answers (12)

Asked by
Anaheim CA
Read all my Q&A
Home Improvement Profile: DIYer
June 1, 2016
Answer: 
Should be fine, because: I wasn't able to adjust the height by turning (un/screwing) the two parts as instructed, so I took it back to HD. The clerk did exactly as you did; just yanked the two tubes apart. We reassembled it, adjusted to correct height, installed it, and after 3 yrs, no problems.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Huntsville, AL, USA
Read all my Q&A
January 29, 2014
Answer: 
no you didnt damage anything as long as you place the lock ring back into position, you can expect it to perform exactly as it was designed to.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tracy California
Read all my Q&A
Home Improvement Profile: DIYer
January 25, 2014
Answer: 
I believe if you can install the lock ring back and the valve is at the proper height. Remember the Center Line which is marked at the top of valve must be above overflow tube as with the rubber hose using the clamp. If this does not work a new valve cost about seven dollars.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Taylor, MI, USA
Read all my Q&A
January 14, 2014
Answer: 
As long as you do not crack the lock ring it should be okay.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Castle, PA, USA
Read all my Q&A
January 14, 2014
Answer: 
NO...JUST RE-INSTALL MAKE CERTAIN THE RUBBER GASKET IS NOT BROKEN OR CRUSHED ADD SOME WATER TO THE TANK TO CHECK FOR LEAKS!.....
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

January 14, 2014
Answer: 
Should be ok...
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Lawrence, Kansas
Read all my Q&A
December 31, 2013
Answer: 
No. It will slide back in place.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Sandy Ut.
Read all my Q&A
October 30, 2013
Answer: 
If you put everything back the way it was, you should be fine.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tooele, UT, USA
Read all my Q&A
October 23, 2013
Answer: 
I have never had a problem with the Fluidmaster. The product should be fine as long as you didn't break or strip any of the parts.
float levels are set according to tank capacity. So some adjustment might be required. I always make any adjustments after a test run.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

June 25, 2013
Answer: 
Fluidmaster instructs not to remove the lock ring. Fluidmaster would need to inspect the valve to determine whether it has been damaged or functionality has been effected. You are strongly advised to replace the entire valve.
-5points
2out of 9found this answer helpful.
Was this helpful?helpful2unhelpful7

Asked by
Utah
Read all my Q&A
June 22, 2013
Answer: 
Not sure I can answer that but if it went together okay probably is okay. You maybe could test it before installing just to be sure by connecting it to the fill feed outside the toilet assuming you have a flexible hose??
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Greensboro, NC, USA
Read all my Q&A
June 22, 2013
Answer: 
It should be Ok. Once you reassemble it, is it functioning correctly?
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from Universal Toilet Fill Valve
 
11 answers

Need to hold my tiolet handle for it to flush, What can I buy to fix this problem

This question is from Universal Toilet Fill Valve
Asked by
New Orleans
Read all my Q&A
April 15, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (11)

Asked by
Texas
Read all my Q&A
July 2, 2014
Answer: 
New flapper valve. If you watch a working toilet flush, the flapper floats up for a few seconds, and then flops down to seal the drain hole.
That or your tank isn't filling enough before you flush to keep the flapper up long enough, or your handle isn't raising the flapper up high enough. If the latter, shorten the chain.
+2points
5out of 8found this answer helpful.
Was this helpful?helpful5unhelpful3

Asked by
tucson
Read all my Q&A
June 24, 2014
Answer: 
Sounds like the flipper assembly. It's the rubber valve that sits on the bottom of the reservoir tank that keeps the water in the reservoir basin until time to flush. There is a chain attached to it and the flush handle that lifts it. It slowly comes back down as the water level reduces. Sounds like this is the problem.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
SAN ANTONIO,TX
Read all my Q&A
June 3, 2014
Answer: 
Try to adjust the chain to the flapper valve, If it is not clearing the opening. If that does not work, replace the flapper valve and the chain to the release lever. You will have to adjust the new chain to insure it does not stay open. Good Luck and keep at maintaining your property. The small jobs will give you the satisfaction and courage to try new and harder projects!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Ohio, USA
Read all my Q&A
June 3, 2014
Answer: 
try to tighten the nut on the back then tighten the chain
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Atlanta, GA, USA
Read all my Q&A
May 20, 2014
Answer: 
A new handle or it could be your fill vaule not properly filling the tank so not a nuff water Is getting in the tank .
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Arizona, USA
Read all my Q&A
May 13, 2014
Answer: 
Check that the length of the chain from handle to flapper is correct. Not to tight and has some play but not too much chain that will cause the flapper not to lift on a easy flush motion and you need to hold the handle to lift the flapper.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
West Chester, OH, USA
Read all my Q&A
April 29, 2014
Answer: 
SHORTEN THE CHAIN OR REPLACE THE FLUSH (FLAPPER) VALVE.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Harrison, AR 72601, USA
Read all my Q&A
April 23, 2014
Answer: 
Kimmy,
There are three possibilities,1. the chain that attaches to the flapper at the bottom of the tank and the handle has two much slack, shorten the chain so just barley any slack is there. 2. the american standard units included a small float on top of the flapper someone may have changed the flapper to a standard one, change it to the right one. 3. there were some manufactures that failed to get a Read More
Kimmy,
There are three possibilities,1. the chain that attaches to the flapper at the bottom of the tank and the handle has two much slack, shorten the chain so just barley any slack is there. 2. the american standard units included a small float on top of the flapper someone may have changed the flapper to a standard one, change it to the right one. 3. there were some manufactures that failed to get a unit that flushes properly,if you have one of these you are doing the one thing that helps . in this case i recommend replacement . home depot has flush gauges at their display, be sure to get a 10 and one that uses a flapper , there are many strange methods out there but the old standard style flapper is the best.Their Glacier bay series works great for about 100 Bucks Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
San Juan Capistrano, CA
Read all my Q&A
April 16, 2014
Answer: 
I would suggest trying a new flapper valve along with a new tank lever. The flapper valve to choose from is dependent upon the age of your toilet. If your toilet predates 1994,I suggest using our model 501 or 504. Both Flappers are designed to stay open longer for a full flush. If your toilet's age is after 1994 then using an Adjustable flapper like our models 5051 and 502 would be recommended as these Read More
I would suggest trying a new flapper valve along with a new tank lever. The flapper valve to choose from is dependent upon the age of your toilet. If your toilet predates 1994,I suggest using our model 501 or 504. Both Flappers are designed to stay open longer for a full flush. If your toilet's age is after 1994 then using an Adjustable flapper like our models 5051 and 502 would be recommended as these flappers will allow the proper amount of water to flush in the bowl and not be wasteful with the tank water. Read Less
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Royersford, PA
Read all my Q&A
April 15, 2014
Answer: 
Try shortening the chain between the handle and the flapper, this may lift the flapper higher and allow more water to flush.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 15, 2014
Answer: 
Hello Kimmy, I’m Chris from the Home Depot’s how-to Community. Thank you for your question.
Actually, you may not have to buy anything at all.
Inside the toilet tank there is a rubber flapper at the bottom which is connected to the handle arm by a chain. It sounds to me that you just need to adjust the chain so that when the handle is at rest there is just a little bit of slack in it. When you push the Read More
Hello Kimmy, I’m Chris from the Home Depot’s how-to Community. Thank you for your question.
Actually, you may not have to buy anything at all.
Inside the toilet tank there is a rubber flapper at the bottom which is connected to the handle arm by a chain. It sounds to me that you just need to adjust the chain so that when the handle is at rest there is just a little bit of slack in it. When you push the flush handle, that properly adjusted chain will allow the rubber flapper to rise far enough off the drain to float as the toilet flushes. The flapper will reseal the drain as the tank empties and all should be good.
I hope this helps,
Chris.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0
This question is from Universal Toilet Fill Valve
 
11 answers

What causes my fluidmaster to fill the tank so slowly, as long as 5 minutes to fill? I have slow fill on 2 toilets.

This question is from Universal Toilet Fill Valve
Asked by
Detroit, MI
Read all my Q&A
April 10, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (11)

Asked by
lake st. louis, mo
Read all my Q&A
February 11, 2015
Answer: 
could be water line pressure, or valve is not open all the way, or valve is partly blocked
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
KY (40383)
Read all my Q&A
January 2, 2015
Answer: 
I replaced my Fluidmasters with new Fluidmasers for the same reason. Corrosion products within the water lines (galvanized pipes, 30 years old), CaCO3 (calcium carbonate, lime stone, from hard water) and FeO3 (plain rust) collected over time inside the valve and throttled the flow of water. As more months went by the filling time became 20 minutes for both of my bathrooms.
Even if you install a new Read More
I replaced my Fluidmasters with new Fluidmasers for the same reason. Corrosion products within the water lines (galvanized pipes, 30 years old), CaCO3 (calcium carbonate, lime stone, from hard water) and FeO3 (plain rust) collected over time inside the valve and throttled the flow of water. As more months went by the filling time became 20 minutes for both of my bathrooms.
Even if you install a new valve, the sediments have to be flushed to clear the path. I installed the lowest cost valves, flushed the dirt (sediments) out (follow the instructions that come with the valve) and everything will be just fine. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Sachse Tx
Read all my Q&A
Home Improvement Profile: DIYer
December 10, 2014
Answer: 
Hi
You need to replace the tank water fill valves.
I would replace with (Universal Water Fill Valves) available from your local Home Depot store or Home Depot online..
First -turn off the water line from the wall water supply to the tank..closed..
Now flush the water from the tank by holding the flush valve down till all or most all the water is drained from tank and toilet..
Now ..remove the old
Read More
Hi
You need to replace the tank water fill valves.
I would replace with (Universal Water Fill Valves) available from your local Home Depot store or Home Depot online..
First -turn off the water line from the wall water supply to the tank..closed..
Now flush the water from the tank by holding the flush valve down till all or most all the water is drained from tank and toilet..
Now ..remove the old fluidmaster from the tank..
Also*** check the Flapper and seals to the drain..If they are in need of replacing..do it now since you are already in the tank..
This is easy..Unscrew the tank nuts and bolts securing the tank to the toilet..
Remove the old flapper,seals ,rings from the tank and toilet..Replace with the new flapper kit from Home Depot and re secure the bolts,nuts and tank to toilet..DO NOT OVER TIGHTEN the bolt nuts to tank to toilet..Make a secure snug fit..
If just your fill valve to replace...
Take your new Universal Fill Valve and install where the old one was..Just screws into place..
Make sure your water spray line is placed inside your tank where the water spray hose is facing towards the inside tank to fill tube and not the tank wall...
Now secure the water connection hose has new water seal tape on the threads and resecure to take ..
Now turn the water on and check for leaks..No leaks..Good...Now just fill your tank ..
Check your water flush handle to make sure you are getting a secure fit and flush from inside your tank from handle,to flapper..If not..adjust as you see it.
If all is good ---You are completed...!
This is a very easy install and should not take you much time to complete..
I hope this helps you..
Read Less
+7points
8out of 9found this answer helpful.
Was this helpful?helpful8unhelpful1

October 7, 2014
Answer: 
is water valve all the way on? Did you flush the gunk out of tank first? That's all I can think of...
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Texas
Read all my Q&A
July 2, 2014
Answer: 
Is the water shutoff behind the toilet open all the way?
Have you popped open the top lid of the valves and cleaned/flushed them?
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Ohio, USA
Read all my Q&A
June 3, 2014
Answer: 
its clogged up must take top off & wipe the diaphragm off then but try this first turn water off then disconnect the supple line and check for debris
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Atlanta, GA, USA
Read all my Q&A
May 20, 2014
Answer: 
I must be the water pressure going to toilet check the angle stop and make sure it is fully open .
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Arizona, USA
Read all my Q&A
May 13, 2014
Answer: 
How old is the fluidmaster? If less than 5 years, it may be faulty, if greater than 5 yrs it may be time t change out. They work great, but do not last forever.
-1point
2out of 5found this answer helpful.
Was this helpful?helpful2unhelpful3

Asked by
Harrison, AR 72601, USA
Read all my Q&A
April 23, 2014
Answer: 
you may have some trash in the valve . shut your water off next to the toilet ,take the lid off the tank, flush the toilet to empty water . There is a plastic cap on the top of the flush valve ,take it off you will see two keepers that hold the insides in use a screw driver to lift these tabs enough so you can turn it. with it apart clean out any trash you see then hold your hand over the opening loosely Read More
you may have some trash in the valve . shut your water off next to the toilet ,take the lid off the tank, flush the toilet to empty water . There is a plastic cap on the top of the flush valve ,take it off you will see two keepers that hold the insides in use a screw driver to lift these tabs enough so you can turn it. with it apart clean out any trash you see then hold your hand over the opening loosely then open the water valve just a trickle to flush out any remaining trash ,turn it off put it back together try it out .Where i live this usualuy does the trick. hope it works for you. Read Less
+10points
12out of 14found this answer helpful.
Was this helpful?helpful12unhelpful2

Asked by
Boynton Beach, FL, USA
Read all my Q&A
April 22, 2014
Answer: 
Make sure the the incoming water valve is open all of the way.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Royersford, PA
Read all my Q&A
April 11, 2014
Answer: 
Not sure... Are they new or old? Is the water valve all the way open? Did any sediment get in the lines while replacing? I don't think it has an adjustable fill speed...
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Universal Toilet Fill Valve
 
11 answers

Parts needed

This question is from Universal Toilet Fill Valve
Asked by
YesImawoman
San Diego, CA
March 13, 2013
Do I have to buy the Fluidmaster Universal Fill Valve AND the Fluidmaster Toilet Flush Valve kit to replace my toilet's entire ball-cock valve (the whole thing needs to come out)?
User submitted video
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (11)

Asked by
Huntsville, AL, USA
Read all my Q&A
January 29, 2014
Answer: 
The Flush valve kit is all you need. Although i would recommend the fill valve kit also it has dynamic engineering and will last a lifetime these are great products.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tracy, CA
Read all my Q&A
Home Improvement Profile: DIYer
January 25, 2014
Answer: 
All that is needed is the valve (flowmaster 400). Nothing else if your valve is broken. Instructions are long but is simple to install.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Taylor, MI, USA
Read all my Q&A
January 14, 2014
Answer: 
As long as the flush valve does not leak and is working properly you do not have to replace the flush valve to use this fill valve.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 14, 2014
Answer: 
No. Only the flush valve.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Lawrence, Kansas
Read all my Q&A
January 1, 2014
Answer: 
If you remove your toilets ball-cock valve, all you need to replace it is the Fluidmaster Universal Fill Valve. It is a good idea to replace the flush valve but not necessary.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Greensboro, NC, USA
Read all my Q&A
May 21, 2013
Answer: 
No, you don't need to replace the flush valve. If you are replacing the ball-cock, it is the fill valve that you need. Also, you may want to replace the flapper if your current flapper is not seating to the the flush valve well.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Southeastern Illinois
Read all my Q&A
May 9, 2013
Answer: 
Yes you have to replace both , as they are 2 separate valves. one flushes & 1 fills the tank
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
ruskin
Read all my Q&A
March 15, 2013
Answer: 
no, you will replace the ballcock with the fluidmaster. you probably should replace yoour flapper also it's the thing that flips up when you push the flush handle. pick one up when you buy the fluidmaster.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Utah
Read all my Q&A
March 14, 2013
Answer: 
The fill valve only controls the water going into the toilet tank and has nothing to do with the "flapper" outlet valve. I do not know if they package a full "inlet and outlet" kit or if it is two boxes.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

March 14, 2013
Answer: 
To replace/update just your existing ballcock valve, you only need a new 400A fill valve (the 400A directly replaces the ballcock valve). The 400A fill valve is a complete kit that comes with the parts needed to connect to the toilet’s overflow pipe (refill tube and clip) as well as the connecting nut and washer to install it on the bottom of your toilet tank. Should you want to also replace the flush Read More
To replace/update just your existing ballcock valve, you only need a new 400A fill valve (the 400A directly replaces the ballcock valve). The 400A fill valve is a complete kit that comes with the parts needed to connect to the toilet’s overflow pipe (refill tube and clip) as well as the connecting nut and washer to install it on the bottom of your toilet tank. Should you want to also replace the flush valve, the 400AKR Complete Toilet Repair Kit is all you need to have your toilet run like new - this easy to install kit also includes the Flush Valve and Flapper as well as a new toilet handle. (All these components are also available separately.) If your toilet is over 15 years of age Fluidmaster suggests replacing all the tank parts using a complete tank kit along with a new water supply line. Read Less
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Staten Island, NY, USA
Read all my Q&A
March 13, 2013
Answer: 
YES YOU DO ! ONE LETS WATER IN THE OTHER LETS IT OUT ! HOPE THIS HELPS !
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-09-08 T12:53:40.362-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100554467, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 92ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 672 reviewers.
Rated 1.0 out of 5.0 by Agree with DW's 8/16/16 review! This time around, I bought 3 valves for 3 toilets 1 week ago. One valve has already started to hiss (valve not completely closing) even after selecting the lowest fill level. After about an hour, it has reached the top of the toilet's fill tube and is wasting water just like I am going to have to do on gas and time getting and installing a replacement! And yes Fluidmaster, I installed it correctly as shown in my photo. It wouldn't have worked for a week without issue if I hadn't. August 29, 2016
Rated 5.0 out of 5.0 by Toilet repair simple installation, worth it to repair running toilets, it should pay off since my water bills were high from a slightly but constantly running toilet September 6, 2016
Rated 4.0 out of 5.0 by Required replacement The product was easy to install. the instructions were clear. there is a learning surve to the product. September 6, 2016
Rated 5.0 out of 5.0 by Works as intended Direct replacement for the same valve that was leaking a bit after 20+ years. Easier to replace the whole thing than to repair. works fine. September 2, 2016
Rated 4.0 out of 5.0 by Toilet Fill Valve had to be returned Toilet Fill valve was originally purchased from my local H. D. When I went to install it there was no instructions. Thought that was a new way to save paper. Got instructions off web. Went to extend the length of valve pipe so the float would keep the water at correct tank level. It wouldn't extend at all. Took back to H. D. and traded for another. Installed new valve with no problem. No instruction sheet in the first box and lid not sealed shut should have been my clue not to buy. H. D. employees need to watch what they do with material returns August 9, 2016
Rated 1.0 out of 5.0 by LOUD While Filling Very noisy while filling, I lived with it for three days and had to replace it with a different brand. September 8, 2016
Rated 1.0 out of 5.0 by Defective valve There are not too many choices when it comes to toilet fill valves, and FluidMaster is certainly a commonly-stocked product. They definitely have the design down to a science, and I've used quite a few of this model over the years. The trouble is that when you have a problem with a toilet and drive to the store to buy a valve, install it, and find that it's defective, it's terribly inconvenient to have to go back and get a replacement. This is an example of poor quality control. You're better off buying two and returning one after you finish your repair. August 16, 2016
Rated 5.0 out of 5.0 by Universal Toilet Fill Valve Installation is a breeze and can be done by anyone with minimal tools. Easy to adjust to tank size and fill line. Works great. September 6, 2016
  • 2016-09-08 T13:51:37.963-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_672, tr_672
  • loc_en_US, sid_100554467, prod, sort_default
2 3 4 5  ... 24 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT