Rated 2.3 out of 5 by 16
Rated 1.0 out of 5.0 by Frustrated Poor Design
Let's just say If I had to do the post's first I would have returned everything. You have to double plumb everything. First you have to shim the junk wood post into the bracket. Most of my post's we're twisted which makes it all the harder. Build a bracket with the post installed into it already so hours aren't spent wasted. Another complaint I have is why sell the railing fastener kit with screws for balusters and those of us that used the round metal balusters double pay for screws that come with the metal balusters. Overall after building a 16'x19' deck I think this product is a poor value.
August 21, 2016
Rated 1.0 out of 5.0 by Homeowner Bad Product with a Bad Description
The product is bad. The wood poor quality and bracket ill designed. I bought it to match the decking, but should have read the reviews and gone with something else.
The product description says it can be used on wood or concrete. However only the hardware for concrete installation is supplied. Almost every picture shows it installed on a wood deck, but it doesn't come with the hardware. Really, how many of these are installed on concrete? This product description is really misleading. Now, I am off to True Value (not Home Depot) to buy hardware.
Save yourself some aggravation and buy something else
August 5, 2016
Rated 3.0 out of 5.0 by hbinline Sloppy workmanship on the 4X4!!
The 4X4 was cut way too small for a nice fit into the bracket. I bolted the bracket plum, but trying to get the 4X4 plum was a tricky operation. The best thing to do first is cut shims to fill the gaps between the bracket & the 4X4. The bracket is well made & powder coated. It is all I needed, but couldn't find it separately. .
August 3, 2016
Rated 1.0 out of 5.0 by Timmay Expensive, poor design
What you get for $42 each is a cheap pine post and a bracket, and some bolts that MIGHT be useful if you're installing this into concrete. If you're using this on a wood deck (like 95% of customers, and like the video shows), you get no hardware. They don't even include the little screws to attach the post to the bracket.
The kit also states that for wood deck application, the bolts need to go through a minimum of 4" of wood. That means they will only work properly for a wooden deck if you planned ahead and put a double 2x brace around your perimeter.
Because of the size of the flange, the outside of your posts will end up 3" inside the outer edge of the deck surface.
Returning all 16 of them to the store.
April 16, 2016
Rated 1.0 out of 5.0 by steve not for a dIY
the wood posts were twisted and bowed to the point that some were unusable. out of the 14 i purchased, only one of them was straight. The bad ones i did use made it harder to install post wraps. The kit comes with concrete fasteners. if you want to use these posts on a wood deck, you will have to buy a bunch of bolts, nuts, and washers. I am a carpenter by trade and these posts were not easy to install. I dont know that a DIY would be able to install these. Would not recommend to anyone wanting to do there own project.
March 30, 2016
Rated 3.0 out of 5.0 by Conjo These are needed to make the deck railing that we ordered.
These kits made it easy to install the posts for the railing, however, some of the posts were warped and somewhat wet, and had a bit of mold on them. Was not a problem though as the posts were covered up with a plastic sleeve.
May 19, 2015
Rated 5.0 out of 5.0 by 010540 Easy to intall
Need these to put rails for my stairwell leading up into my loft in my shop. They bolted to floor very easily and are very sturdy.
April 5, 2016
Rated 1.0 out of 5.0 by tony SURFACE MOUNT BRACKET AND POST KIT
This product is not worth $43.00 the wood used is very cheap split & not even cut properly to fit the steel bracket the steel bracket is good, but doesn't come with bolts..Pressure treat wood should have been used instead of cheap pine for the post even if it is covered with a plastic sleeve..I bought 19 of these post @ $43 dollar & replace all the cheap pine I was given with my order with pressure treat wood..Did I mention how cheap & split the cheap pine was after sending $917.00. Then I had to spend another $60 plus dollars on 3/8" bolts, nuts, washers, & lock washers...one more thing I had to spend another $14.00 on a 3/8 steel bit, because the holes in the bracket aren't really 3/8" as mention in the video...I had to drill out all 76 hole in the 19 brackets..
December 15, 2015