0097545200019

Veranda

Model 73004026

Internet #100011154

Store SKU #536763

White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)

$20.97 /each

Frequently Bought Together

Product Overview

The Veranda White Classic Diamond 4 ft. x 8 ft. Vinyl Lattice features a vinyl construction that is both weather and impact resistant. It features a low-maintenance design that is easy to install and maintain. Lattice will not discolor or show scratches over time. Enjoy the handsome style of lattice with easy upkeep and little maintenance.

  • Durable impact resistant plastic
  • Low-maintenance design
  • Resists warping, twisting or splitting
  • Tolerant of extreme heat and cold
  • Available in a variety of colors
  • Grid opening: 2-7/8 in.
  • Transferable limited lifetime warranty
  • Note: product may vary by store


  • Lattice

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

20 Questions65 Answers

Customer Questions & Answers

White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
 
9 answers

What do you use to cut this plastic lattice?

This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
Asked by
Midwest
Read all my Q&A
June 9, 2015
I need to cut this lattice to 3'x8' section for a pet, and wonder if it's difficult to cut with a hacksaw, or if some other tool would be better (since I'm cutting the longer part).
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Read all my Q&A
Home Improvement Profile: Professional
August 26, 2016
Answer: 
As a carpenter, I reverse the 7 1/4" circular blade in my skill saw so it doesn't break the plastic.
Then cut along the pencil lines.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Salem Oregon
Read all my Q&A
Home Improvement Profile: DIYer
May 18, 2016
Answer: 
I was able to cut mine with large scissors.. I have Husky ones that I cut plastic straps or cardboard with instead of regular scissors.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Raleigh NC
Read all my Q&A
May 10, 2016
Answer: 
Not hard to cut. We used a saws all. Hacksaw would work. Jig saw would work.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
March 29, 2016
Answer: 
Circular saw works great and you can get a more accurate cut than with a reciprocating or jigsaw.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

November 22, 2015
Answer: 
While they are not supposed to, you can usually get one of the guys at home depot to cut it for you at the store
+5points
6out of 7found this answer helpful.
Was this helpful?helpful6unhelpful1

Asked by
Atlanta GA.
Read all my Q&A
Home Improvement Profile: DIYer
November 9, 2015
Answer: 
I use a RIDGID Model # R28600 Internet # 202672276 Store SKU # 615485 Ocillating tool. Makes very neat cuts.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
unionbridge md.
Read all my Q&A
Home Improvement Profile: Other
August 22, 2015
Answer: 
if YOU HAVE A SABRE SAW ( electric ) mark a straight line on it with a straight edge or chalk line, and follow the line , this can also be done with a fine edged skill saw (circular saw).Good luck.
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
CT
Read all my Q&A
Home Improvement Profile: DIYer
July 24, 2015
Answer: 
I used a sawzall. It worked well for me
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

June 9, 2015
Answer: 
A saw is required for cutting this product.
-1point
3out of 7found this answer helpful.
Was this helpful?helpful3unhelpful4
This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
 
5 answers

How would I attach the lattices to each other to make something like a room screen/divider, sort of a zig-zag pattern?

This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
Asked by
Los Angeles, CA
Read all my Q&A
May 29, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Atlanta GA
Read all my Q&A
Home Improvement Profile: DIYer
May 31, 2016
Answer: 
You have a couple of choices - One is to build aluminum frames 4'x8'. The frames should be at least 1"x1" tubing. This would be the lightest but cost the most and you would have to use self tapping sheet metal screws. Second option is to get some good high grade 2x4's, rip down the center, and join with mitered corners (glue and screw with 3 inch GRK trim screws. Attach the lattice to the 2x4 with 3/4 Read More
You have a couple of choices - One is to build aluminum frames 4'x8'. The frames should be at least 1"x1" tubing. This would be the lightest but cost the most and you would have to use self tapping sheet metal screws. Second option is to get some good high grade 2x4's, rip down the center, and join with mitered corners (glue and screw with 3 inch GRK trim screws. Attach the lattice to the 2x4 with 3/4 lath screws. You could paint or stain the wood framing - color of your choice. If you use the full height, panels can be attached together with a piano hinge, or 4 - 2x2 hinges. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Seaview, WA 98644, USA
Read all my Q&A
Home Improvement Profile: DIYer
May 31, 2016
Answer: 
We used [ color matching ] zip cords to connect ours.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

May 31, 2016
Answer: 
Hello and thank you for your question. We offer connector/divider moulding (73004066) however that will not provide structural support for your lattice. You would need to attach to a wood beam so the lattice would stand.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
New york
Read all my Q&A
May 31, 2016
Answer: 
They sell the accessory items to do this. It is like a bar with a cut out to slide the side into. There is a brochure on it at home depot.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Raleigh NC
Read all my Q&A
Home Improvement Profile: DIYer
May 30, 2016
Answer: 
We drilled holes and used nuts and bolts.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
 
5 answers

Is it possible to roll up the 4x8 foot sheets to transport?

This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
Asked by
Read all my Q&A
April 27, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Marcellus, NY
Read all my Q&A
Home Improvement Profile: DIYer
August 5, 2016
Answer: 
Yes. I had them shipped to me and they were rolled up in a cylindrical package. Quickly straightened themselves out when opened up too.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Boerne, Tx
Read all my Q&A
July 7, 2016
Answer: 
Yes. You might need help but I took a couple of zip ties with me to the store. Rolled up the lattice and secured it with the zip ties. Of course it does not roll up into a small roll but I got it small enough to fit in my back seat and I have a Malibu.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
New york
Read all my Q&A
May 31, 2016
Answer: 
Yes, with a zip tie
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Raleigh NC
Read all my Q&A
May 25, 2016
Answer: 
Yes, you can roll up 3 of them and put them in a box.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

April 29, 2016
Answer: 
Hi Artay and thank you for your question. Yes, these sheets are flexible and can be rolled for easy transport.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
 
5 answers

trellis for plants?

This question is from White Vinyl Classic Diamond Lattice (Common: 5/32 in. x 4 ft. x 8 ft.; Actual: .159 in. x 47.5 in. x 95 in.)
Asked by
NY
Read all my Q&A
April 16, 2016
If I use the molding that attaches to the sides of this, do you think it would be strong enough to stand up on it's own? I would bury part of it to hold it down. I'm looking to make a trellis with it for some kind of plant to add a little more privacy to my yard.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Atlanta GA
Read all my Q&A
Home Improvement Profile: DIYer
August 25, 2016
Answer: 
It is not strong enough. the moulding is just for looks only. After a period of time it will warp and fall off. I suggest you consider using pressure treated 2x2s or something similar.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Boerne, Texas
Read all my Q&A
Home Improvement Profile: DIYer
July 10, 2016
Answer: 
I used this lattice on both sides of my porch as a trellis for jasmine. I used 1" x 2" treated boards to build a frame. I screwed corner braces to join the boards to make the frame. Then I screwed the lattice to the frame.
I left enough length on the bottom of side boards to insert them into small cinder blocks I have at the back of the flower bed. I put some Quick Crete in and watered it down. The
Read More
I used this lattice on both sides of my porch as a trellis for jasmine. I used 1" x 2" treated boards to build a frame. I screwed corner braces to join the boards to make the frame. Then I screwed the lattice to the frame.
I left enough length on the bottom of side boards to insert them into small cinder blocks I have at the back of the flower bed. I put some Quick Crete in and watered it down. The frame still didn't want to stay upright so I used 2" inside braces to to attach the top of the frame to my porch frame.
Hope this helps and/or gives you some ideas.
LJR
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
New york
Read all my Q&A
May 31, 2016
Answer: 
Will not stand on its own.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Raleigh NC
Read all my Q&A
May 25, 2016
Answer: 
I think you would be better off to install posts to hold it in place. It would not be sturdy enough otherwise. Great idea!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 18, 2016
Answer: 
Hi Laurie and thank you for your question. The moulding can be installed vertically, however the mouldings are not structural, only decorative, so you would need additional structural support.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-09-08 T13:19:28.092-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100011154, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 33 reviewers.
Rated 5.0 out of 5.0 by Quality product that holds up to time I had a sheet of this lattice sitting around for 6-7 years and decided I would use it to block the view to a porch. I purchased several more sheets for the project and was amazed that I couldn't tell the older one from the new ones even though it had been covered in dust from sitting in the wood shop all these years! All I had to do was hose it off and it looked brand new! July 12, 2016
Rated 5.0 out of 5.0 by Excellent Lattice We attached this lattice to the side of our front porch for a clematis vine. It is easy to maneuver and great quality, we had it hung in minutes and get many compliments on it. June 24, 2016
Rated 5.0 out of 5.0 by Wonderful Product We used this product to enclose our above ground pool. It is very sturdy and attractive. May 10, 2016
Rated 3.0 out of 5.0 by Bows with heat. Used this for the ceiling on back porch. It looked great at first, then when summer came the lattice expanded with the heat, bowed and sagged. It cracked and broke in a few places. Recommend using wood lattice on the underside of a ceiling instead. Other applications may work better for the vinyl. August 28, 2016
Rated 5.0 out of 5.0 by Excellent choice for sight line breakup The lattice requires no preparation for installation other than cutting to fit and drilling holes for fasteners. It was easy to cut (used a hacksaw blade with good results) and easy to drill. Looks great and won't need paint. August 2, 2016
Rated 5.0 out of 5.0 by 2 thumbs up! Easy to cut with the right tool; easy to clean. Much easier to work with in cutting to size; didn't have to worry about the lattice breaking like a wooden one would. August 2, 2016
Rated 5.0 out of 5.0 by Great purchase Product very easy to cut and install. very lighweight and easy to handle alone. June 28, 2016
Rated 5.0 out of 5.0 by Lattice worked for me I used this product in a frame I made out of 1"X 2" treated boards. I set the frame into cinder blocks at the back of my flower bed and attached the top to my porch frame to keep it from falling over. Now I just have to wait for the jasmine to fill in the lattice. July 7, 2016
  • 2016-09-08 T14:54:01.625-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_33, tr_33
  • loc_en_US, sid_100011154, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT