Model # VLH26

Internet #202985196

Viagrow 26 in. Grow Light Hanger
0837654349151

Viagrow

26 in. Grow Light Hanger

$21.99 /each

Frequently Bought Together

Product Overview

The light hanger is the easiest, most efficient hanger on the market. No more doing the light limbo struggling with chains to get the perfect mounting height. The light hanger maximizes every available lumen by enabling you to adjust the mounting height of your reflector easily and accurately, a daily event for many growers. The light hanger works using a dual pulley system which accommodates adjusting the height of both mounting hooks independently for reflectors whose center of gravity is offset by the weight of the socket assembly. The light hanger can be adjusted simply by pulling the cords together or independently to raise or lower the light as needed. Make sure the locking pin is in place and the fixture is stable when adjusting the light hanger. Be sure to adjust cords with the label facing towards you. The cords are twenty-five feet long, allowing for adjustment without disturbing your plants in the process. Recommended for remote ballast fixtures and fluorescent t5 lights only. Assembly hardware and easy-to-follow instructions are included. The light hanger comes with mounting hardware and pre-assembled cords. With the hardware, simply mount the unit using the pre-drilled holes. Be sure to mount the light hanger to a firm structural support. The maximum weight that the 26 in. Light hanger will support is 30 pounds. Do not exceed the maximum weight guidelines, or failure of the unit may result.

  • Adjust the mounting height of your grow light easily and accurately, a daily event for many growers
  • Can be adjusted simply by pulling the cords together or independently to raise or lower the light as needed
  • Recommended for remote ballast fixtures and fluorescent T5 lights
  • Comes with mounting hardware and pre-assembled cords; simply mount the unit using the pre-drilled holes

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

26 in. Grow Light Hanger
26 in. Grow Light Hanger

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
This question is from 26 in. Grow Light Hanger
 
2 answers

Is this self-supporting and stable (or does it need to hang from the ceiling in some way)?

This question is from 26 in. Grow Light Hanger
Asked by
Read all my Q&A
April 16, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Levittown, NY
Read all my Q&A
Home Improvement Profile: DIYer
September 25, 2016
Answer: 
It needs to be installed into the ceiling into a beam, not into drywall. It is not self-supporting. The photo is deceptive. It only comes with the headrail and two screws.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 17, 2016
Answer: 
The hanger is meant for ceiling mount.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-30 T22:47:21.823-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202985196, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.0 out of 5 by 2 reviewers.
Rated 2.0 out of 5.0 by Do not go by the picture. The picture advertising this product is deceptive and as there was no description on the site I obtained it from, I assumed it would be like the photo. I was wrong. Basically this is an empty Venetian blind holder without the blinds, just the thin nylon strings.. The photo shows what looks like a cover at the bottom and hooks holding it. There is only the headrail. There are no hooks nor the bottom portion. The instructions state it needs to be installed into a structural support beam and comes with 2-3 inch screws and 2 washers and instructions on how to tie a "simple knot" when you do get the hooks, light , etc. It is also only recommended for use with remote ballast fixtures. Now that it is installed, I need to go to the Viagrow site and purchase the proper light fixtures, bulbs and hooks to use it. It would have been much better to have a complete description of the Lighthanger. I gave it an average rating in quality as it is, as I previously said, a sturdy venetian blind holder. September 25, 2016
Rated 4.0 out of 5.0 by good light hanger although this product is intended for use with remote ballast fixtures and fluorescent t5 lights only. i am using it with an enclosed ballast and reflector system. which is 25 pounds. (5 pounds below the maximum weight limit) since this light system is heavy, i am forced to use one hand to hold and lift the light system. while the other hand pulls the light hanger cords to adjust the height. although not as strong as chain setups, this product makes adjusting the height of your lights much easier. September 2, 2012
  • 2016-10-30 T20:56:04.160-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_202985196, prod, sort_default
1-2 of 2
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT