Model # TR475

Internet #203132822

Store SKU #212260

Village Ironsmith Traditional 4 ft. X 32 in. Black Steel Rail Panel
0050206031377

Village Ironsmith

Traditional 4 ft. X 32 in. Black Steel Rail Panel

$26.38 /each

Frequently Bought Together

Product Overview

Classic design for decorative purposes only. Posts and accessories sold separately. Installation instructions are included on every accessory package.

  • 1-1/4 in. wide x 7/8 in. deep top and bottom rail channels, heavy-duty twisted vertical spindles are 4 in. on-center, installed rail height of 36 in.
  • Can be pitched for use on inclines
  • Use Metropolitan and Traditional newel post (MP125), connector (ND125) and floor flange (FF125), sold separately, to install
  • Touch up all scraped or scratched area immediately upon installation using a rust inhibiting paint made for steel. annual repainting is recommended
  • For at grade installation only
  • All railing components sold separately
  • Price includes 1 rail section
  • Ornamental rails for decorative purposes only

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

6 Questions6 Answers

Customer Questions & Answers

Traditional 4 ft. X 32 in. Black Steel Rail Panel
Traditional 4 ft. X 32 in. Black Steel Rail Panel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Need 2 8ft long and 2 46inch,& 2 88ft for steps. How can I order this?

This question is from Traditional 4 ft. X 32 in. Black Steel Rail Panel
Asked by
Read all my Q&A
April 30, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
North Carolina
Read all my Q&A
Home Improvement Profile: Professional
May 10, 2016
Answer: 
This product is only sold in stock lengths. It must be cut to desired lengths then installed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

how can you pitch for stairs

This question is from Traditional 4 ft. X 32 in. Black Steel Rail Panel
Asked by
south jersey
Read all my Q&A
April 22, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

April 25, 2016
Answer: 
Below are the instructions for pitching the railing ....
1. Place with bottom rail on the ground. Hold rail in place
applying pressure downward and toward one end of
rail. The correct angle is obtained when posts and rail spindles are parallel.
2. Butt ends of top and bottom rail against edges of posts.
Mark top and bottom rails for correct length and angle and cut.
WARNING: Do not re-position once pitch
Read More
Below are the instructions for pitching the railing ....
1. Place with bottom rail on the ground. Hold rail in place
applying pressure downward and toward one end of
rail. The correct angle is obtained when posts and rail spindles are parallel.
2. Butt ends of top and bottom rail against edges of posts.
Mark top and bottom rails for correct length and angle and cut.
WARNING: Do not re-position once pitch has been established. Too much bending will lead to weld
failure. CAUTION: Pitched railing must be cut at the angle of the spindles to eliminate gaps at the
post connection.
Please Call Technical Services at 800-211-9612 with any additional questions. Read Less
+3points
5out of 7found this answer helpful.
Was this helpful?helpful5unhelpful2
 
1 answer

Does this come in white?

This question is from Traditional 4 ft. X 32 in. Black Steel Rail Panel
Asked by
Read all my Q&A
April 12, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

April 13, 2016
Answer: 
Unfortunately no, Black is the only color. But it is a paintable surface. Please call Technical Services at 800-211-9612, 8-5 M-F ET.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

do they make longer sections

This question is from Traditional 4 ft. X 32 in. Black Steel Rail Panel
Asked by
tulsa
Read all my Q&A
March 9, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 10, 2016
Answer: 
Yes, It also comes in 6 foot sections, model# TR675 ... Please call Technical Services at 800-211-9612, M-F 8A-5P ET.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
2 »
  • 2016-10-31 T00:17:47.564-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203132822, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 2.0 out of 5 by 3 reviewers.
Rated 1.0 out of 5.0 by Garbage Fragile, directions are Non existent. They fail to inform you that the flanges won't take a socket if you want to use lags, no room to fit, the rail is flimsy and fragile with stickers all over it. After dealing with all the hiccups it looks decent but overall just a cheap product that is way to hard to order at "select stores" than it's worth. Spend money and get something decent. May 12, 2016
Rated 1.0 out of 5.0 by Flimsie, spindles broke when bending railing. Spindle welds broke while bending rails to desired angle, would not recommend this product. May 19, 2016
Rated 4.0 out of 5.0 by Great product. Easy to install. Great product but not available in all stores. Had to order online. Easy install without too much experience. Looks great! Would recomend November 13, 2013
  • 2016-10-30 T22:39:06.588-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_203132822, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 97ms
  • REVIEWS, PRODUCT