Model # 0958245

Internet #203208993

Watts 1-Handle Top Mount Air Gap Faucet in Brushed Nickel with Monitor for Reverse Osmosis System
0098268782110

Watts

1-Handle Top Mount Air Gap Faucet in Brushed Nickel with Monitor for Reverse Osmosis System

$7565 /each

Product Overview

This top mount faucet is easy to install and the unique toggle bolt design allows for tightening the faucet down from above the counter. It features a brushed nickel finish, quick connect fittings on the bottom of the faucet for air gap or non-air gap applications, and a built-in monitor to remind when it's time to change the filters at six month intervals. This faucet also includes 3/8 in. x 4 ft. of feed tubing, 1/4 in. x 4 ft. of rinse water tubing and 3/8 in. x 3 ft. drain tubing This faucet conforms to U.S. plumbing codes. A 1-1/4 in. mounting hole is required.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

This top mount faucet is easy to install and the unique toggle bolt design allows for tightening the faucet down from above the counter. It features a brushed nickel finish, quick connect fittings on the bottom of the faucet for air gap or non-air gap applications, and a built-in monitor to remind when it's time to change the filters at six month intervals. This faucet also includes 3/8 in. x 4 ft. of feed tubing, 1/4 in. x 4 ft. of rinse water tubing and 3/8 in. x 3 ft. drain tubing This faucet conforms to U.S. plumbing codes. A 1-1/4 in. mounting hole is required.
  • Top mount design
  • Quick connect tube ports
  • Built-in filter change monitor, compatible with reverse osmosis or water filtration systems
  • High quality brushed nickel finish

Product Overview

This top mount faucet is easy to install and the unique toggle bolt design allows for tightening the faucet down from above the counter. It features a brushed nickel finish, quick connect fittings on the bottom of the faucet for air gap or non-air gap applications, and a built-in monitor to remind when it's time to change the filters at six month intervals. This faucet also includes 3/8 in. x 4 ft. of feed tubing, 1/4 in. x 4 ft. of rinse water tubing and 3/8 in. x 3 ft. drain tubing This faucet conforms to U.S. plumbing codes. A 1-1/4 in. mounting hole is required.

California residents: see   Proposition 65 information

  • Top mount design
  • Quick connect tube ports
  • Built-in filter change monitor, compatible with reverse osmosis or water filtration systems
  • High quality brushed nickel finish

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Connection size (in.)
1/4 In.
Spout Height (in.)
11

Details

Color Family
Nickel
Color/Finish
Brushed Nickel
Faucet Type
Beverage Faucet
Features
Filter Change Indicator,Reverse Osmosis Compatible
Included Components
No Additional Items
Number of Faucet Handles
Single Handle
Returnable
90-Day
Spout Reach (in.)
4

Warranty / Certifications

Certifications and Listings
No Certifications or Listings
Manufacturer Warranty
Watts (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

Specifications

Dimensions

Connection size (in.)
1/4 In.
Spout Height (in.)
11

Details

Color Family
Nickel
Color/Finish
Brushed Nickel
Faucet Type
Beverage Faucet
Features
Filter Change Indicator,Reverse Osmosis Compatible
Included Components
No Additional Items
Number of Faucet Handles
Single Handle
Returnable
90-Day
Spout Reach (in.)
4

Warranty / Certifications

Certifications and Listings
No Certifications or Listings
Manufacturer Warranty
Watts (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

More Products With These Features

Search

Questions & Answers

What is the difference between air gap and non air gap?

I have a GE RO system and my owners manual does not specify air gap or non/
Asked by: James
Air gap faucets provide a drain path with a vent opening at the base of the faucet. The drain is necessary on some reverse osmosis (RO) systems because they create waste water in the process of self-cleaning. If the filter pressure were to go negative by loss of street pressure or during a filter change, the air gap prevents siphoning of drain water back into the filter. A non-air gap faucet is simply a valve to allow dispensing of water. It would only have a water supply connection, and is used on in-line filters that do not generate waste water..
Answered by: Maintguy
Date published: 2016-08-15

Mine has begun leaking badly around the base, flooding my countertop regularly. There is no back up in my RO system.

Asked by: Sandiego
I had the same problem with water coming out my air gap vent. The air gap faucet is intended to provide a break in the drain line to prevent siphoning of contaminated drain water whenever there is a negative pressure in the RO system (as during filter change draining). The saddle clamp on my drain had rotated over time (maybe creep from alternating warm and cool drain water?) This caused the hole I had drilled to become misaligned. The problem became evident when I disconnected the drain tube and attempted to clear the hole. I used the smooth end of a drill bit (that I that I originally used to drill the hole) to align the tube connection side of the saddle clamp with the hole. I then used PVC glue (my drain is PVC) on the other half of the clamp's radius surface that contacts the drain pipe, re-installed the clamp and bolts to hold it in place. I then removed the hole alignment drill and re-attached the drain tube. This worked for a couple of months before backing up again. Puzzled, I found the drain hole was clogged, but still aligned. Troubleshooting further, I used a flashlight to look down into the drain to find that when I had drilled the hole for the drain, some burrs were formed on the inside of the drain pipe. The burrs were catching debris forming an effective plug over the hole that gravity pressure drain water could not overcome. I used a long stainless steel tube brush to remove the plastic drilling burrs. It has been over 6 months since, and the drain has stayed open. A note to air gap faucet owners - if you don't hear the sucking/gurgling noise from the sink drain after running a significant amount of RO water from the tap, the air gap drain is probably restricted and may soon back up.
Answered by: Maintguy
Date published: 2016-09-07

I'd like to attach a filter system to the faucet is this possible for a counter mounted filtering system?

Asked by: Kathy
This faucet is marketed for that exact purpose. The "monitor" is actually a LED that flashes blue for six months before turning red to indicate that it is time for a filter change.
Answered by: Maintguy
Date published: 2016-08-15

My faucet/monitor is flashing red - how do I stop it?

I can't find my manual. I would like to turn it off permanently - as I have a service that changes the filters on the rented r/o system.
Asked by: TenB
Remove the battery, this will prevent the red or blue light. If you re-install the battery, it will start a 6 month countdown before flashing red again.
Answered by: Maintguy
Date published: 2016-08-17
  • y_2017, m_9, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_, sid_203208993, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • QUESTIONS, PRODUCT

Customer Reviews

1-Handle Top Mount Air Gap Faucet in Brushed Nickel with Monitor for Reverse Osmosis System is rated 3.8 out of 5 by 16.
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2017-04-04
Rated 1 out of 5 by from Bought this one to replace 4 year old one that started leaking within a year and got progressivel... Bought this one to replace 4 year old one that started leaking within a year and got progressively worse. This one leaked right out of the box, I threw the entire system out and replaced it with a different brand. Total waste of money.
Date published: 2016-12-08
Rated 5 out of 5 by from Excellent water flow! Appearance is wonderful, as it goes beautifully with the sink. Excellent water flow! Appearance is wonderful, as it goes beautifully with the sink.
Date published: 2017-02-21
Rated 5 out of 5 by from RO Faucet Super product Very easy to install and high-quality
Date published: 2016-11-08
Rated 1 out of 5 by from Do not purchase This unit has been discontinued by the maker. Watts will not sell it any more and no replacement parts are available. I can only guess because it leaks, as mine does. spent a lot of money and what a waste.
Date published: 2014-01-06
Rated 4 out of 5 by from Very good quality and works as expected Quality construction, easy to follow instructions fast assembly make this a great product to feel good about buying.
Date published: 2015-12-15
Rated 5 out of 5 by from Fast delivery on a good product This product can be considered a good one from the Watts Premier company. It was a replacement of same model that we had originally with the reverse osmosis system since 2010. we're disappointed a little that it lasted only 6 years, when it began leaking and the only remedy was to replace it.! Installing was easy even for a DIY. We're happy & satisfied with it, price wise and performance.
Date published: 2016-06-23
Rated 2 out of 5 by from Have to replace two of them I have ordered two of these and am just about to return the second one because it's leaking, just as the first one did. Professional plumbers have installed each one, so it's not likely the install. I have a Watts reverse osmosis system so I have to order yet another faucet, but I wish I could go with another brand.
Date published: 2016-09-07
  • y_2017, m_9, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_, sid_203208993, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 30ms
  • REVIEWS, PRODUCT