Model # 0958234

Internet #203208955

Watts Single-Handle Water Dispenser Faucet with Air Gap in Brushed Nickel for Reverse Osmosis System
0098268781748

Watts

Single-Handle Water Dispenser Faucet with Air Gap in Brushed Nickel for Reverse Osmosis System

$22.52 /each

Frequently Bought Together

Product Overview

This air gap faucet is designed for dispensing water from a reverse osmosis system or a water filtration unit that requires a drain connection with an air gap. It features a brushed nickel finish, lever for dispensing and swivel neck with high reach design. This faucet also includes 1/4 in. x 4 ft. of feed tubing, 1/4 in. x 4 ft. of rinse water tubing and 3/8 in. x 3 ft. of drain tubing that is pre-attached. This faucet conforms to U.S. plumbing codes. A 1-1/4 in. mounting hole is required.

California residents: see   Proposition 65 information

  • High quality brushed nickel finish
  • 1/4 in. connection
  • Compatible with reverse osmosis or water filtration systems
  • Lever for dispensing

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Does this come with a filter or is that a seperate item I need to purchase?

Asked by: Brb
The filter is purchased separately.
Answered by: novice108
Date published: 2017-01-02

Does this faucet have the three hoses coming into the base of the faucet?

Asked by: Lalo
Yes, it has a black hose, a blue hose, and a red hose.
Answered by: novice108
Date published: 2017-01-02

Does the lever have a "stay on" position for filling large containers?

Asked by: tetonvw
Yes, to make it stay on you lift the lever up.
Answered by: novice108
Date published: 2017-01-02

Does this faucet work with a 008 WPI 4 stage RO?

Mine is leaking through the body.
Asked by: diypaul
Yes, that faucet would work with a reverse osmosis unit. If the blue tube leading to the current faucet is 3/8” you may need an additional adapter.
Answered by: WattsWater
Date published: 2015-09-20
  • y_2017, m_2, d_24, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_, sid_203208955, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT

Customer Reviews

Single-Handle Water Dispenser Faucet with Air Gap in Brushed Nickel for Reverse Osmosis System is rated 4.3 out of 5 by 20.
Rated 3 out of 5 by from Two major problems: 1) the only installation instructions are on the box and they are VERY poor. ... Two major problems: 1) the only installation instructions are on the box and they are VERY poor. 2) it only comes prepared for a 1/4" water line and my previous faucet was a 3/8" water line. I had to contact the manufacturer and pay for their adapter kit. Ugh!
Date published: 2016-10-25
Rated 2 out of 5 by from Did not have enough instructions. Could not make work properly Did not have enough instructions. Could not make work properly
Date published: 2016-11-09
Rated 4 out of 5 by from This faucet meets my expectations. The satin finish keeps it looking good, and I like that it has... This faucet meets my expectations. The satin finish keeps it looking good, and I like that it has two settings - press down and hold it down to keep the water flowing; or lift up and the water flows hands-free until you push it back down. For me (being relatively unskilled at things like this) the faucet was a bit difficult to install. The instructions showed three different options, and all the parts were not properly illustrated in the option that was applicable to my situation, so I had to scratch my head to figure it out from the other two illustrations. It also showed that I should use a big washer, but it could not possibly fit because the hoses were in the way. After a little experimentation I got it installed and working. It's been in for about ten days - it is heavily used, and it is working smoothly with no complaints.
Date published: 2016-12-31
Rated 5 out of 5 by from Good replacement From 15 years of non-use the previous air gap faucet did not allow waste water to flow for the proper functioning of an existing reverse osmosis system. This faucet was a very good replacement and as easy to install as anything under a kitchen sink could be.
Date published: 2016-10-18
Rated 5 out of 5 by from the roverse osmosas faucet was exactly what i needed. 3... the roverse osmosas faucet was exactly what i needed. 3 lines as needed. the picture doesn't show how many water lines it has. that should be updated by home depot. for the price well worth the money.
Date published: 2017-01-24
Rated 4 out of 5 by from Water dispenser Fairly easy to install. Works as advertise. The level is a little hard to push. The nozzle moves when operating so watch out.
Date published: 2016-10-04
Rated 4 out of 5 by from Affordable alternate to the original Watts product, which costs twice as much. Affordable alternate to the original Watts product, which costs twice as much.
Date published: 2017-02-07
Rated 5 out of 5 by from Perfect, exactly what I ordered! Perfect, exactly what I ordered!
Date published: 2016-12-06
  • y_2017, m_2, d_24, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_, sid_203208955, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 64ms
  • REVIEWS, PRODUCT