Model # 0958231

Internet #203208943

Watts Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System
0098268781717

Watts

Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System

  • Requires 1/2 in. mounting hole
  • Features swivel neck
  • Brushed nickel finish
$32.98 /each

Frequently Bought Together

Product Overview

This non-air gap faucet is designed for dispensing water from a reverse osmosis system or a water filtration unit that does not require a drain connection with an air gap. It features a brushed nickel finish, lever for dispensing and swivel neck with high reach design. This faucet uses 1/4 in. tubing. A 1/2 in mounting hole is required.

California residents: see   Proposition 65 information

  • High quality brushed nickel finish
  • 1/4 in. connection
  • Compatible with reverse osmosis or water filtration systems
  • Lever for dispensing

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

9 Questions12 Answers

Customer Questions & Answers

Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System
Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

Can you connect both hot and cold lines to this faucet? There are 2 connections points?

This question is from Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System
Asked by
Read all my Q&A
September 25, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

July 26, 2016
Answer: 
No, there is only one connection point.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Houston, TX, USA
Read all my Q&A
Home Improvement Profile: DIYer
January 9, 2015
Answer: 
No. There is only one connection.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Bemidji, Minnesota
Read all my Q&A
October 28, 2014
Answer: 
No, this faucet is one connection only. It's designed to be used to release water from a reverse osmosis filter.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 20, 2014
Answer: 
No. This faucet is designed for cold water line connection only. If there was a second connection point on the faucet, it would be for an "Air Gap" pass though from the RO System Drain Line/to the Drain Pipe. If this is a Zero Waste System, the Drain Line connects through an Adapter Valve to the Hot water line, the same way the inlet connection is made on the cold water side. Please let us know if you Read More
No. This faucet is designed for cold water line connection only. If there was a second connection point on the faucet, it would be for an "Air Gap" pass though from the RO System Drain Line/to the Drain Pipe. If this is a Zero Waste System, the Drain Line connects through an Adapter Valve to the Hot water line, the same way the inlet connection is made on the cold water side. Please let us know if you have any other questions or concerns.
Thank you, Watts Retail Group Customer Service
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

what is the total faucet height above the sink

This question is from Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System
Asked by
PR
Read all my Q&A
September 11, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Houston, TX, USA
Read all my Q&A
Home Improvement Profile: DIYer
January 9, 2015
Answer: 
The top of the faucet is about 8", and then it curves down about 1".
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 6, 2014
Answer: 
Hi, it is 10 Inches above the pad on which it sits. Thank you, Watts Retail Group Customer Service
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Shank length and maximum hole size?

This question is from Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System
Asked by
Read all my Q&A
February 1, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Houston, TX, USA
Read all my Q&A
Home Improvement Profile: DIYer
January 9, 2015
Answer: 
Shaft length is about 4" and the mounting washer can accommodate a standard sink hole. I would guess about 1 3/8".
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Retail Group
Read all my Q&A
February 10, 2014
Answer: 
The escutcheon plate is about 1-3/4", Make sure the hole isn't larger than 1-1/4". Otherwise, you may not be able to cover the hole. The threaded bolt hanging down from the faucet is roughly 3"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

proposition 65 & AB1953 compliant?

This question is from Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System
Asked by
Philadelphia PA
Read all my Q&A
May 28, 2016
Is this faucet California proposition 65 and AB1953 compliant? It wouldn't make too much sense to have lead or other chemicals leaching into your filtered drinking water. The product description is very unclear about proposition 65 compliance.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

May 29, 2016
Answer: 
This product is in compliance with the notice for Proposition 65 for California residents. Information for your other question is not available.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-31 T00:08:12.369-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203208943, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 64ms
  • QUESTIONS, PRODUCT

Customer Reviews

Single-Handle Water Dispenser Faucet with Non Air Gap in Brushed Nickel for Reverse Osmosis System is rated 4.3 out of 5 by 17.
Rated 3 out of 5 by from Disappointed!! Apparently, they don't know chrome from brushed nickel. Have not installed it yet, but it seems well made, and will probably prove to be dependable. What disappoints me is the fact that I paid an extra $6 for brushed nickel. Got it home, opened to the box to find that it is chrome. The sad part is that, the box is clearly marked as Chrome, but a stick on label has been printed and attached saying it brushed nickel. I guess clearly this company likes to play games Would I recommend? Yes, if you can live with a chrome one. Be sure to not pay the xtra bucks for brushed nickel, 'cause you're not going to get it. Saw previous comments with the same problems.
Date published: 2016-10-10
Rated 5 out of 5 by from Great basic drinking water faucet We replaced the original faucet, which was just like this one except for the finish, because we got new counters, sink and sink faucet. We want the finish to match the other pieces. The original faucet was installed with a reverse osmosis filtration system five years ago and we have not had any issues with it. The new one looks great, functions well and does not detract from the beauty of the new sink faucet.
Date published: 2016-08-30
Rated 5 out of 5 by from This product was relatively simple (not easy) to install and works well. The only suggestion is ... This product was relatively simple (not easy) to install and works well. The only suggestion is that a lock or non-slip washer should be provided to help prevent the body of the faucet from turning from side to side when used. With the current neoprene washers it is difficult to tighten the faucet to the sink sufficiently to prevent it from turning.
Date published: 2016-12-27
Rated 4 out of 5 by from No Leaks! Great Flow! Fairly simple to install, and the best part is no more wet counters. Our old faucet had been leaking from the handle for some time. It's nice to have a dry counter now. Not the sturdiest of faucets, but works well, and fills the glass quickly.
Date published: 2016-07-26
Rated 4 out of 5 by from faucet Easy to install to the filter. Really great water and the unit actually compliments the pull down faucet we purchased from Home Depot also.
Date published: 2016-08-11
Rated 5 out of 5 by from Nice quality, looks good, functions well Ordered to replace a 13 year old water dispenser faucet that was leaking and in poor shape. We have a water filter system, not reverse osmosis & this is working great. Very nice quality, simple design & good water pressure. Very pleased.
Date published: 2016-05-17
Rated 5 out of 5 by from Great faucet This faucet was everything I expected it to be. A good purchase
Date published: 2016-02-10
Rated 5 out of 5 by from Great RO spigot This brushed nickel spigot replaced an old but still serviceable brass unit. It works and looks great.
Date published: 2015-08-11
  • y_2017, m_1, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_, sid_203208943, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • REVIEWS, PRODUCT